• Transactions of Materials Processing
• /
• v.3 no.1
• /
• pp.84-96
• /
• 1994

Simulation of 3 dimensional large irregularly shaped stamping process by a dynamic approach, based on an explicit time integration scheme, has been shown to be highly efficient and robust in comparison to traditional, implicit, quasi-static ones. The objective of the work is to evaluate the results from explicit code in application to deep drawing of rectangular cup and stamping of automotive front fender, in which deformation, force, thickness distribution are calculated. The method of predicting spring back and formability by and explicit code are suggested and applied to the processes.

• IE interfaces
• /
• v.13 no.3
• /
• pp.339-347
• /
• 2000

The use of the Web-based Simulation Environment (WBSE) provides a strong influence on supply chain simulations. A virtual supply chain simulation is available to evaluate strategies for reducing response time to customers and for shrinking the finished goods inventory along its supply chain. This paper presents the basic concepts and definitions of Web-Based Global Supply Chain Management (WBGSCM) simulation system. It also discusses the advantages of supply chain simulation modules integration. A Time Synchronization Mechanism (TSM) called Phased Bucket Scheme (PBS) is introduced as an approach of the distributed simulation modules integration.

• Journal of Mechanical Science and Technology
• /
• v.18 no.3
• /
• pp.460-470
• /
• 2004

A computational analysis of engineering problems with moving domain or/and boundary according to either Lagrangian or Eulerian approach may encounter inherent numerical difficulties, the extreme mesh distortion in the former and the material boundary indistinctness in the latter. In order to overcome such defects in classical numerical approaches, the ALE(arbitrary Lagrangian Eulerian) method is widely being adopted in which the finite element mesh moves with arbitrary velocity. This paper is concerned with the ALE finite element formulation, aiming at the dynamic response analysis of baffled fuel-storage container in yawing motion, for which the coupled time integration scheme, the remeshing and smoothing algorithm and the mesh velocity determination are addressed. Numerical simulation illustrating theoretical works is also presented.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1286-1290
• /
• 2003

This paper presents a newly implemented parallel finite element procedure for contact-impact problems. Three sub-algorithms are includes in the proposed parallel contact-impact procedure, such as a parallel Belytschko-Lin-Tsay (BLT) shell element generation, a parallel explicit time integration scheme, and a parallel contact search algorithm based on the master slave slide-line algorithm. The underlying focus of the algorithms is on its effectiveness and efficiency for inclusion in future finite element systems on parallel computers. Throughout this research, a prototype code, named GT-PARADYN, is developed on the IBM SP2, a distributed-memory computer. Some numerical examples are provided to demonstrate the timing results of the procedure, discussing the accuracy and efficiency of the code.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.149-156
• /
• 1995

This paper presents a method of detecting chatter vibration in end-mill process. The detecting system consists of an adaptive signal processing scheme which uses an autore- gressive time-series model and a neural network is proposed and is verified its effectiveness by using acceleration and cutting force signals recorded during slotting in end-mill operations. Expeerimental results indicate that the proposed system provides excellent detection when chatter is occured within the ranges of cutting conditions considered in this study and an effectiveness of the integration of signals is confirmed.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.181-182
• /
• 2003

A preconditioned numerical method for gas-liquid to-phase flow is applied to solve cavitating flow. The present method employs a density based finite-difference method of dual time-stepping integration procedure and Roe's flux difference splitting approximation with MUSCL-TVD scheme. A homogeneous equilibrium cavitation model is used. The method permits simple treatment of the whole gas-liquid two-phase flow field including wave propagation, large density changes and incompressible flow characteristics at low Mach number. By this method, two-dimensional internal flows through a venturi tuve and decelerating cascades are computed and discussed.

• 한국전산유체공학회:학술대회논문집
• /
• 2006.10a
• /
• pp.31-35
• /
• 2006

The delta-formulation of the Navier-Stokes equations has been popularly used in the aerodynamics area. Implicit algorithm can be easily implemented in that by using Taylor series expansion. This formulation is extended for an unsteady analysis by using a dual-time integration. In the meanwhile, the incompressible flows with heat transfers which occur in the area of thermo-hydraulics have been solved by a segregated algorithm such as the SIMPLE method, where each equation is discretised by using an under-relaxed deferred correction method and solved sequentially. In this study, the dual-time delta formulation is implemented in the segregated Navier-Stokes solver which is based on the collocated cell-centerd scheme with un unstructured mesh FVM. The pressure correction equation is derived by the SIMPLE method. From this study, it was found that the Euler dual-time method in the delta formulation can be combined with the SIMPLE method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.5
• /
• pp.427-434
• /
• 2000

The paper proposes a zero speed start-up scheme of direct rector controlled induction motor drive without any torque jerk. At standstill condition, a method is derived to calculate a stator flux with only stator current. The programmable 3-stage low pass filters with programmable time constants is used in order to solute the problem of integration for stator flux estimation in the direct vector control mode. Due to the time delay of 3-stage low pass filter, the status flux decreases rapidly and also the torque jerk occurs during the transition from standstill mode to the direct rector control mode. A feedforward control strategy of the stator flux is suggested to prevent the torque jerk at start-up. Through results of simulation and experiment with 32 bit DSP, the performance of the start-up scheme is verified.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.260-263
• /
• 2003

This paper has developed the computer integration manufacturing system and Internet based tele-operations. The functions of CIMS include production planing, material requirement planning, work order generation, process control, quality control, shipping planning, warehouse and inventory management and material cost accounting.[1] In this paper focuses on the automatic warehouse control and inventory management by developing the information system as well as the Internet-based integration. The system overview is divided into three parts, the mechanical system, the computer and developed software to control and manage the information and the communication system. The mechanical system consists of the warehouse machine and forklift mobile robot controlled by programmable logic controller (PLC). The computer works on many functions such as control station interfaces with PLC, managing database and inventory, and Internet server to broadcast the inventory database to users via World Wide Web and monitoring the operation on web camera. Our scheme the inventory database can be checked easily anywhere and anytime when the users connect to the Internet. In this article, the lead-time and inventory level can be reduced therefore the holding cost and operating time is also decreased.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.5
• /
• pp.899-909
• /
• 1992

An iterative solution technique is presented to analyze the dynamic systems of rigid bodies subjected to kinematic constraints. Lagrange multipliers associated with the constraints are iteratively computed by monotonically reducing an appropriately defined constraint error vector, and the resulting equation of motion is solved by a well-established ODE technique. Constraints on the velocity and acceleration as well as the position are made to be satisfied at joints at each time step. Time integration is efficiently performed because decomposition or orthonormalization of the large matrix is not required at all. An acceleration technique is suggested for the faster convergence of the iterative scheme.