• Archives of Orthopedic and Sports Physical Therapy
• /
• v.14 no.2
• /
• pp.127-133
• /
• 2018

Purpose: This study investigated the effects of changing the tilt angle of the exercise bed on physiological characteristics of trapezius, multifidus, and hamstring muscle function. Methods: Twenty elderly who complains of back and lumbar pain or discomfort participated in this study (average age: $64.70{\pm}4.55$ years). The physiological characteristics, including muscle tone (F), dynamic stiffness (S), and elasticity (D) of trapezius, multifidus, and hamstring muscles were measured by a Myoton device at three tilt angles (0, 15, and 30 degrees) during exercise. Results: The muscle tone, dynamic stiffness, and elasticity of the right trapezius and left hamstring muscle showed significant differences (p<0.05) according to exercise bed tilt angle, while the other muscles showed no significant differences. Conclusions: Our results demonstrate that physiological characteristics of the upper and lower extremity muscles are affected ipsilaterally, according to the tilt angles of the exercise bed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.53-60
• /
• 2002

Recently, the development of aerospace and automobile industries brought new technological challenges, related to the growing complexity of products and new geometry models. High speed machining using 5-Axis milling machine is widely used for 3D sculptured surface parts. 5-axis milling of turbine blade generates the vibration, deflection and twisting caused from thin and cantilever shape. So, the surface roughness and the waviness of workpiece are not good. In this paper, The effects of cutter orientation and lead/tilt angle in 5-Axis high speed ball end-milling of turbine blade were investigated to improve the geometric accuracy and surface integrity. The experiments were performed at lead/tilt angle $15^{\circ}$ of workpiece with four cutter directions such as horizontal outward, horizontal inward, vertical outward, and vertical inward. Workpiece deflection, surface roughness and machined surface were measured with various cutter orientations such as cutting direction, and lead/tilt angle. The results show that when 5-axis machining of turbine blade, the best cutting strategy is horizontal inward direction with tilt angle. The results show that when 5-axis machining of turbine blade, the best cutting strategy is horizontal inward direction with tilt angle.

• Journal of the Korean Society of Physical Medicine
• /
• v.13 no.4
• /
• pp.75-84
• /
• 2018

PURPOSE: This study was conducted to determine the effects of whole-body tilt exercise with visual feedback on trunk control, strength, and balance in patients with acute stroke. METHODS: The study included 18 patients with acute stroke who were randomly allocated to a Whole Body Tilt Exercise Group (WBTEG, N=9) and a General Trunk Exercise Group (GTEG, N=9). The WBTEG conducted whole-body tilt exercises with visual feedback, and the GTEG performed general trunk exercises. Both groups performed the exercises five times a week for 4 weeks. Outcomes were assessed using the trunk impairment scale (TIS), the trunk flexor and extensor strength test, the static balance test, and the Brunel Balance Assessment. RESULTS: After 4 weeks of intervention, both groups showed significantly improved TIS scores, muscle strength, and balance components (p<.05 in both groups). However, the improvement in TIS, muscle strength, and static balance in the WBTEG was significantly better than that in the GTEG (p<.05). CONCLUSION: Although both groups in this study showed post-intervention improvement, patients from the WBTEG who received visual feedback demonstrated more improvement. These findings indicate that whole-body tilt exercise with visual feedback may be effective at improving trunk control, trunk muscle strength, and balance in patients with acute stroke. Further studies are needed to gain a better understanding of the effectiveness of whole-body tilt exercise in patients with acute stroke.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.12
• /
• pp.1169-1174
• /
• 2009

In this paper, a prototype of implementable Sun tracking algorithm for mobile systems powered by alternative energy is proposed. The proposed system uses 2-axis tilt sensor and 3-axis magnetic sensor to measure orientation and posture of the system according to the horizon coordinates system, which are used to compensate tilt effects. Then through astronomical calculation using the present time and position informations obtained from GPS sensors, the calculated azimuth and altitude of the Sun in that location. The position of the Sun is converted to that of the mobile Sun tracking system coordinates and used to control A-axis and C-axis of the system.

• Journal of Power Electronics
• /
• v.13 no.6
• /
• pp.1051-1057
• /
• 2013

This paper proposes an implementable sun tracking algorithm for portable systems powered by alternative energy sources. The proposed system uses a 2-axis tilt sensor and a 3-axis magnetic sensor to measure the orientation and posture of the system, according to a horizon coordinates system, and compensate for tilt effects. Then, through an astronomical calculation, using the present time and position information obtained from GPS sensors, the azimuth and altitude of the sun in that location is calculated and converted to portable sun tracking system coordinates and used to control the A- and C-axes of the system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05d
• /
• pp.53-56
• /
• 2003

Blending effects for generating a pretilt angle in nematic liquid crystal (NLC) with negative dielectric anisotropy on the blended polyimide (PI) of homeotropic and homogeneous alignment surface were studied. Also, we investigated the EO performances for the advanced VA-$\pi$ cell using this homeotropic blended PI surface. A many decrease of tilt angle on the polymer surface to blend homeotropic PI and homogeneous PI with side chain type was measured, and the tilt angle decreased as blended ratio and rubbing strength increase. The blended effects for generating a pretilt angle were clearly observed, and the many decrease of tilt angle can be achieved by using the blended PI surface. The electro-optical (EO) characteristics using the advanced VA-$\pi$ cell using the homeotropic blended PI surface than that of conventional VA cell can be improved. We suggest that the developed advanced VA-$\pi$ cell on a homeotropic blended PI surface is a promising technique for the achievement of a fast response time, and a high contrast ratio.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.9
• /
• pp.826-832
• /
• 2003

Blending effects for generating a pretilt angle in nematic liquid crystal (NLC) with negative dielectric anisotropy on the blended polyimide (PI) of homeotropic and homogeneous alignment surface were studied. Also, we investigated the EO performances for the advanced VA- $\pi$ cell using this homeotropic blended PI surface. A many decrease of tilt angle on the polymer surface to blend homeotropic PI and homogeneous PI with side chain type was measured, and the tilt angle decreased as blended ratio and rubbing strength increase. However, a small decrease of tilt angle on the polymer surface to blend homeotropic PI and homogeneous PI with main chain type was measured. The blended effects for generating a pretilt angle were clearly observed, and the many decrease of tilt angle can be achieved by using the blended PI surface. The electro-optical (EO) characteristics using the advanced VA- $\pi$ cell using the homeotropic blended PI surface than that of conventional VA cell can be improved. We suggest that the developed advanced VA-$\pi$ cell on a homeotropic blended PI surface is a promising technique for the achievement of a fast response time, and a high contrast ratio.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.672-675
• /
• 2007

Experimental data are presented which describe heat losses of cavity type receiver in wind tunnel. Experiments are conducted at various conditions such as the heater temperature in cavity changes from 300, 400, and 500 oC, wind speed in tunnel from 2 to 8 m/s, and four different tilt angle of 30, 50, 70, 90o. The power consumption including temperature, voltage and current for each experimental conditions are measured and stored in data logger at everyone second interval. The experimental results show that heat losses increase with increasing wind speed and with tilt angle. However, heat losses for the tilt angle of 70 and 90o is almost same at each heater temperature. In addition, the effects of natural convection in combined convection heat losses vary in according to the tilt angle.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.6
• /
• pp.130-141
• /
• 2000

The virbration characteristics of a passenger car steering column are studied by using a modal test and a finite element (FE) analysis. To verify the FE model and the results, an experiment using the impact exciting method is performed. Two types of the steering column in this study are considered as follows; (ⅰ) the non-tilt type steering column and (ⅱ) the upper-tilt type steering column. The experimental results are compared with those o the FE analysis, and it ti shown that the results agree with each other. The effects of various design parameters such as the bracket thickness, the column diameter on the natural frequencies are also investigated by FE analysis.

• Journal of International Academy of Physical Therapy Research
• /
• v.10 no.4
• /
• pp.1868-1872
• /
• 2019

Background: Lower trapezius muscle function is important for the prevention and treatment of shoulder injuries. However, scapular posterior tilt movement has been overlooked in lower trapezius strengthening exercise programs. Objective: To examine the effects of prone arm lifting with scapular posterior tilt (PALSPT) on trapezius muscles. Design: Crossover study Methods: 17 healthy males were recruited for participation in this study. Participants performed backward rocking diagonal arm lifting (BRDAL) and PALSPT. To train participants in scapular posterior tilt movements for PALSPT, visual biofeedback of scapular movements was provided using a motion sensor. Electromyography (EMG) activities of the middle and lower trapezius were recorded using a surface EMG system. Differences in middle and lower trapezius muscle activity between BRDAL and PALSPT exercises were analyzed. Results: Lower trapezius muscle activity was significantly greater during PALSPT than during BRDAL (p=.006). Although greater EMG activity was observed in the middle trapezius during PALSPT than during BRDAL, this difference was not significant (p=.055). Conclusions: The results of the present study indicate that scapular posterior tilt movements must be considered in lower trapezius muscle strengthening programs.