• 제목/요약/키워드: tiller development

검색결과 106건 처리시간 0.026초

An Analysis of Factors Relating to Agricultural Machinery Farm-Work Accidents Using Logistic Regression

  • Kim, Byounggap;Yum, Sunghyun;Kim, Yu-Yong;Yun, Namkyu;Shin, Seung-Yeoub;You, Seokcheol
    • Journal of Biosystems Engineering
    • /
    • 제39권3호
    • /
    • pp.151-157
    • /
    • 2014
  • Purpose: In order to develop strategies to prevent farm-work accidents relating to agricultural machinery, influential factors were examined in this paper. The effects of these factors were quantified using logistic regression. Methods: Based on the results of a survey on farm-work accidents conducted by the National Academy of Agricultural Science, 21 tentative independent variables were selected. To apply these variables to regression, the presence of multicollinearity was examined by comparing correlation coefficients, checking the statistical significance of the coefficients in a simple linear regression model, and calculating the variance inflation factor. A logistic regression model and determination method of its goodness of fit was defined. Results: Among 21 independent variables, 13 variables were not collinear each other. The results of a logistic regression analysis using these variables showed that the model was significant and acceptable, with deviance of 714.053. Parameter estimation results showed that four variables (age, power tiller ownership, cognizance of the government's safety policy, and consciousness of safety) were significant. The logistic regression model predicted that the former two increased accident odds by 1.027 and 8.506 times, respectively, while the latter two decreased the odds by 0.243 and 0.545 times, respectively. Conclusions: Prevention strategies against factors causing an accident, such as the age of farmers and the use of a power tiller, are necessary. In addition, more efficient trainings to elevate the farmer's consciousness about safety must be provided.

벼 이삭줄기의 유관속발육과 이삭특성과의 관계 (Development of Vascular Bundles in the Peduncle of Different Tillers and its Relationship to Panicle Characteristics in Rice)

  • Lee, Dong-Jin;Benito S. Vergara;Oscar B. Zamora;Kim, Bong-Ku;Chae, Je-Cheon
    • 한국작물학회지
    • /
    • 제37권2호
    • /
    • pp.155-165
    • /
    • 1992
  • 본 실험은 수도이삭줄기의 유관속 발육을 증진시켜 수량을 증가시킬 수 있는 방안을 모색하기위하여 1989-1990년에 국제벼연구소(IRRI)에서 인도형인 IR58과 인본형인 Unbong 7을 공시하여 실시하였다. 1. 주간의 절간위치별 유관속수는 상위로부터 제1절간(수수절간)은 제 2,3,4,5절간에 비해 현저하게 적었으며, 품종별로는 IR58이 Unbong 7보다 많이 발육되었다. 2. 수수절간의 유관속수 및 횡단면적은 주간이 1,2차 분얼경보다 많이 컸으며, 분얼의 발육순서에 따라 저하되는 경향이었고, IR58은 Unbong 7보다 대유관속의 수와 횡단면적이 많이 컸으나 소유관속은 적고 작았다. 3. 양분의 이동통로인 사부와 수분의 이동통로인 본부의 횡단면적도 분얼의 출현이 빠른 것이 늦은것보다 크게 발육되어 있어서 출현이 빠르게 분얼경이 양수분흡수 및 동화물질의 전류에 유리한 특성을 가지고 있는 것을 사료되었다. 4. 이삭당 수중 및 수량은 주간에서 가장 높았고, 1차분얼 2차분얼의 순서로 낮아지는 경향으로 분얼경의 출현순서와 밀접한 관련성을 가지고 있었다. 5. 수수절간의 대유관속수는 이삭형질인 1,2차 지경수와 유의한 정의 상관관계를 나타냈으며, 이는 대유관속이 지경수 및 영화수 분화에 직접적인 영향을 준 것으로 해석되었다. 6. 일찍 출현된 분얼경은 늦게 출현된 분얼경에 비해 비교적 긴 생육기간을 가지고 있었으며, 양호한 유관속의 발육, 굵은 수수직경, 영화수 분화 및 등숙율을 향상시키고 나아가서 수량이 많아지는 특성을 나타냈다.

  • PDF

Effect of Planting Density and Nitrogen Level on Growth and Yield in Heavy Panicle Weight Type of Japonica Rice

  • Kim, Bo-Kyeong;Kim, Hyun-Ho;Ko, Jae-Kwon;Shin, Hyun-Tak
    • 한국작물학회지
    • /
    • 제44권2호
    • /
    • pp.106-111
    • /
    • 1999
  • To investigate the effects of planting density and nitrogen level on growth and yield potential of newly bred heavy panicle japonica rice with large grain (Iksan 435 and Iksan 438) or many spikelets per panicle(HR14022-21-8-4 and HR14022-21-8-6), four heavy panicle type rices and two many panicle type rices(Dongjinbyeo and Donganbyeo) as the checks were planted under standard planting density (30$\times$15 cm) and dense planting density (15$\times$15 cm) with two nitrogen levels of standard nitrogen level(110 kg h $a^{-1}$) and heavy nitrogen level(165 kg h $a^{-1}$). Effective tiller rate decreased in dense planting or heavy nitrogen, when compared to standard nitrogen and planting, while leaf area index and to dry weight increased in dense planting or heavy nitrogen. Tiller numbers and panicle numbers were more increased by dense planting than heavy nitrogen, whereas spikelet numbers were more increased by heavy nitrogen than dense planting. Ripened grain ratio was slightly lower only in dense planting. 1,000 grain weight in brown rice was not significantly different in dense planting or heavy nitrogen. Milled rice yield was highest in heavy nitrogen with standard planting for heavy panicle type rice, while yield for many panicle type rice was highest in heavy nitrogen with dense planting, suggesting that many panicle type rice possesses higher adapt-ability for dense planting than heavy panicle type rice. Path coefficient analysis revealed that top dry weight, spikelet number and grain weight were the greatest positive contributors to yield, whereas tiller number was negative to yield.d.

  • PDF

수송 트레일러의 충격흡수장치 개발(II) - 동력경운기 연결 히치 - (Development of Vibration Absorption Device for the Transportation-Trailer System(II) - Connecting Hitch for Power Tiller-Trailer -)

  • 홍종호;이홍주;이성범;박원엽;김성엽
    • Journal of Biosystems Engineering
    • /
    • 제30권3호
    • /
    • pp.147-154
    • /
    • 2005
  • The improved hitch device, which connecting the trailer to power tiller, was developed. This device, composed with spring and rubber, could reduce the vibration and shock levels during driven on off-road. The vertical vibration accelerations for the improved hitch device were measured at 6 positions, i.e. engine, hitch, seat, and three points in trailer (front, middle, and rear) for not driving but at low engine speed of 500 rpm, and compared with the existing hitch device. The results of this study could be summarized as follows; The average vibration acceleration up to 120 Hz was $0.4m/s^2$ at engine part, but it was 0.08 and $0.05m/s^2$ at trailer for existing and improved hitch device, respectively. About $38\%$ of average acceleration level could be absorbed for the improved hitch device compared with existing hitch device. The average vibration acceleration up to 40 Hz was reduced to 0.12 and $0.06m/s^2$ at trailer for existing and improved hitch device respectively, showing the reduction effect of $50\%$. The maximum acceleration occurred at up to 20 Hz of low frequency was much higher than total acceleration occurred at up to 120 Hz, which means that much loss or damage could be occurred during transporting of agricultural products on off-road. The portions of average acceleration occurred at up to 20 Hz of low frequency were $27\%\;and\;21\%$ for the existing and improved hitch device, respectively.

크로마키를 이용한 증강현실 영상출력 연구 (A Study on the Augmented Reality Display for Educating Power Tiller Operator using Chroma-key)

  • 김유용;노재승;홍순중
    • 농업생명과학연구
    • /
    • 제51권1호
    • /
    • pp.205-212
    • /
    • 2017
  • 경운기 시뮬레이터 운전자가 가상환경에서 교육에 몰입할 수 있도록 현실세계에 가상 물체를 겹쳐 보여주는 증강 현실 기술을 구현하였다. 3D 카메라 입력 장치로부터 초당 30 frame 이상 속도로 경운기 모의 운전 장치의 영상을 획득한다. 획득된 현실 영상을 크로마키 처리하여 가상 현실과 결합하였다. RGB 영상의 HSI 변환 실험결과 색상 최대값 0.52, 최소값 0.153, 채도 최대값 0.57, 최소값 0.16, 명도 최대값 1, 최소값 0.12이 크로마키 처리를 위해 최적값이었다. 본 연구에서는 키패드를 이용하여 크로마키 처리된 현실 영상의 위치를 전 후 상 하 좌 우를 버튼으로 조정하여 초기 결합위치를 조정할 수 있고 최종 조정된 값은 저장하여 유지 관리되도록 하였다. 이를 토대로 초당 30프레임 이상의 속도로 가상현실과 크로마키 처리 영상을 결합한 증강현실 구현이 가능함을 보였다.

보행관리기 부착형 부분경운-시비 작업기 개발 (Development of Fertilizer-Soil Incorporation Band Tiller for Walking Cultivator)

  • 김찬수;권병철
    • Journal of Biosystems Engineering
    • /
    • 제29권6호
    • /
    • pp.487-494
    • /
    • 2004
  • This study was conducted to develope a fertilizer-soil incorporation band tiller for the walking cultivator. Because the mixing of soil and fertilizer in the furrow of dry-field has been done manually, several time, heavy labor and much man power were required for the job. This rotary type implement is developed to substitute this manual operation for soil-fertilizer incorporation. The results of this study are summarized as follows : 1) This implement was composed of tilling device, fertilizer application device, frame and tail wheel device. 2) The revolution of driving wheel was $11\~28\;rpm$, that of application roller was $13\~14\;rpm$ the application rate range per revolution of driving wheel was $4.43\~11.80\;g$g and the application rate range by the working speed and the opening quantity was $84.12\~557.20\;g/min$. 3) The adequate working speed was $0.20\~0.40\;m/s$ and the required minimum width of open furrow was 250 mm.

동력경운기 트레일러 방진장치 개발 (Development of the Vibration Absorption System for the Power Tiller Trailer)

  • 홍종호;강인철;이홍주;이성범;김성엽
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 2003년도 동계 학술대회 논문집
    • /
    • pp.69-76
    • /
    • 2003
  • 청과류는 수송과 취급기간 중에 충격, 마찰, 눌림, 타박 등에 지속적으로 노출된다. 그러므로 농산물의 품질을 저하시키는 물리적인 손상을 최소화하기 위해 최선의 처리와 수송방법을 선택할 필요가 있다. 충격흡수 시스템이 갖추어진 대형 냉동 트레일러에 체리, 복숭아, 배, 토마토를 수송했을 때 3.5Hz에서 수직가속도가 가장 크게 나타났고 9-25Hz에서는 이보다는 약간 감소했다. (중략)

  • PDF

동력경운기 부착용 한국형 사료배합기 및 퇴비살포장치 개발 (Development of Power-tiller korea style TMR mixer & Manure spreader)

  • 조기현;이정택;정형길;김종천
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 2003년도 동계 학술대회 논문집
    • /
    • pp.341-347
    • /
    • 2003
  • 최근 우리나라의 우유 및 유제품의 소비증가와 유럽 등지의 가축 광우병문제 등이 대두되면서, 젖소의 사육두수가 서서히 증가되어지고 있으며, 전업농의 경우 가구당 사육두수가 약 20-30두 정도이다. 물론 이 수치는 외국의 가구당 80두 정도에 비하면, 아직은 영세한 실정이다. 이러한 소규모의 사육이기 때문에 기계화가 되어지지 않아 대부분의 소규모 사육농가에서는 순수인력에 의해서 이루어지고 있는 실정이다 따라서 이러한 사료의 준비 및 급여부분을 자동화 또는 기계화의 작업이 가장 시급한 과제라 할 수 있을 것이다. (중략)

  • PDF

Comparative Study of Effects of Illumination with Xenon or Sulfur Lamp on Development of Wheat Plants

  • Chen, Qilin;Yu, Xinjian;Chen, Jinxing;Liu, Yuequn;Weng, Jun;Xu, Chunhe
    • Journal of Photoscience
    • /
    • 제9권2호
    • /
    • pp.394-396
    • /
    • 2002
  • The emission of microwave sulfur lamp is mainly composed of visible light. This lamp producing little infrared radiation, has high light efficiency, long lifespan and less power consumption. In comparison with xenon lamp, growing under sulfur lamp apparently postponed jointing, increased the number of tillers, accelerated root growth of wheat. Relatively, xenon lamp evidently promoted heading and grain maturation. The development characteristics of wheat plant under sulfur lamp were more similar with that in natural condition.

  • PDF

Mechanized Seeding Methods of Hybrid Rapeseed for Double Cropping System in Paddy

  • Sun Kwon-Byung;Lim June-Taeg;Jung Dong-Soo;Shin Jong-Sup
    • 한국자원식물학회지
    • /
    • 제19권3호
    • /
    • pp.401-404
    • /
    • 2006
  • In order to select the seeding machine for mechanizing cultivation of rapeseed in southern areas of Korea, three different seeding machines, ridge rotary, power tiller ridge rotary, tractor ridge rotary were used for sowing one of the high yielding rapeseed cv. Hybrid with five different seeding methods. Seeding of ridge rotary was reduced the seeding effort with 45% and yield components such as plant height, ear length, number of branches and pods, pod length and seed setting rate were higher. The seeding of ridge rotary also was showed highest seed yield. On the basis of time requirement for seeding, vegetative and yield parameters ridge rotary seeding machine was a suitable seeding machine for rapeseed cultivation at the southern area of Korea.