• Korean Journal of Medicinal Crop Science
• /
• v.12 no.3
• /
• pp.219-225
• /
• 2004

This study was conducted to evaluate growth and yield characteristics and the contribution to the yield according to the emergent sequence of tiller under two planting density $(60{\times}15\;cm,\;60{\times}25\;cm)$ in Coix lachryma-jobi L. var. mayuen Stapf. The average culm length and number of rachillas of $60{\times}25\;cm$ planting density were 20 cm shorter and 4.7 higher, respectively, whereas seed setting position of $60{\times}25\;cm$ planting density was 1.7 nodes lower compared with $60{\times}15\;cm$ planting density. Culm length and culm diameter of each tiller became shorter and thinner as the tiller emerged later. Length of rachillas was longer, number of grains was higher and ripening rate was also higher in $60{\times}25\;cm$ planting density than those of $60{\times}15\;cm$ planting density, whereas 100 grain weight in $60{\times}25\;cm$ planting density was lower by 0.5 g compared with $60{\times}15\;cm$ planting density. Length of rachillas and number of grains according to the emergent sequence of tiller were shown shorter and lower as the tiller emerged later. The highest number of bract was obtained from the main culm in both planting densities. 100 grain weight according to the emergent sequence of tiller became lower as the tiller emerged later in $60{\times}15\;cm$ planting density, but there was no clear tendency in $60{\times}25\;cm$ planting density. Among 8 tillers, 5th tiller and 4th tiller of main culm contributed 84.4% to the yield in $60{\times}15\;cm$ planting density, while it was 84.1% in $60{\times}25\;cm$ planting density. Analysis of path coefficient to grain yield showed that direct effect was the highest in the number of grain per tiller followed by in the 100 grain weight and in ripening rate.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.10 no.1
• /
• pp.1-9
• /
• 1990

Tillering of orchardgrass during establishment year was considered as an important factor for ground cover and forage yield. Field experiment was conducted to examine seasonal fluctuation of tiller number in three cultivars of orchardgrass; Potomac, Hall-mark, and Sumas, after transplanting with five planting density. Also, effects of plant density and nitrogen application in cultivar, Potomac were studied on tillering, forage yield and various growth characteristics in pot experiment Tillers per plant decreased with increased density and showed seasonal variations. It increased up to July, decreased during summer months, and increased again from October. Sumas had less tillers than other cultivars, especially at high density. Tillers per unit area kept high during spring. After then, there was stady decrease through summer and remained constant without affecting by planting density. Nitrogen application increased tillers per unit area in Potomac up to 20kg/10a, but decreased its tiller production at 40kg/lOa. Maximum number of tiller was obtained in the combinations of 20kg application of nitrogen with higher density than 324 plant per square meter. Forage yield increased as nitrogen application increased, while it did not respond to plant density. Forage yield had high linear correlation between LAI, leaf number with a peak at 2800 culrns. For high forage yielding, it was suggested to obtain optimum number of tillers per unit area in early season as possible, applying of adequate amount of nitrogen with relative high density depend on cultural condition.

• Asian Journal of Turfgrass Science
• /
• v.3 no.1
• /
• pp.5-12
• /
• 1989

Tiller numbers per Unit area were increased as plant density heightened followed by little difference in tiller number in 110 days after transplanting(ll0DAT), this being caused by the immediate increment of tiller since' 90DAT During the growth period, the greatest number of green leaves per unit area was attained in 90DAT of both 160-density and 200-density plots, and in l00DAT of 40-, 80-, and I 20-density plots. Thus, the period to reach the maximum green leaf number with the high plant density was earlier than with the' low plant density. The increment of plant density increased the DM weight of ahoveground part and, with 40-densitytreatment. DNI weight was increased 6.1 times as much up to 110DAT as up to 7ODAT but 2 to 2.9 times with other ehe'nsity treatments. The' rate of increase in stolon length was greatest at the period between 80 and 90DAT when DM weight of stolon showed a large increment. Meanwhile, the average number of stolon was 1.7 at 70DAT but was increased up to 10 at 110DAT probably due to accelerative appeance of Ist stolon branch since 8.0DAT. DM weight of stolon was found to exceeded that of root after 90DAT Thus it was concluded that, when turfs is estahlished from sprig. it may be desirable for first mowing practice to be made at least within l00 days after planting.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.2
• /
• pp.192-197
• /
• 1989

Two sweet corn hybrids, 'Tanok l' and 'Golden Cross Bantam 70 (GCB 70)' were grown at five plant densities, of 4, 167. 5,556, 6,667. 8, 333, and 11, 111 plants per 10 ares, with or without tiller removal, to determine effects of tiller removal on growth and yield of sweet corn hybrids at various plant densities. Tillers were pulled when less than 15 cm tall. The number of tillers per plant linearly decreased as plant density increased. The two hybrids had similar plant height, ear length and diameter, ear weight and the number of ears per plant and 10 ares. Tanok 1 lodged approximately 20％ at above 8,333 plants per 10 ares, while GCB 70 did not lodge at all, at any plant density. Tanok 1 had higher leaf area index (LAI), ear and stover yields than GCB 70. Except for root lodging and LAI, hybrid x plant density interaction was not significant at 5％ probability level. Plant density did not affect silking data. Increasing plant density linearly increased plant height, LAI, and stover yield, but linearly decreased ear length, ear weight, and the number of ears per plant. Increase in LAI was greater in Tanok 1 than in GCB 70, with increasing plant density. The relationships between the number of ears and ear yield per 10 ares and plant density were Quadratic. The optimum plant density was estimated to be approximately 6500 plants per 10 ares, using the equation based on ear yield. Except for ear height and LA I, hybrid x tiller removal and plant density x tiller removal interactions were not significant. Hybrid x plant density x tiller removal interaction was not significant for any characters. When averaged over hybrids and plant densities, tiller removal reduced plant height and ear and stover yields by about 3, 10, and 16％, respectively, but did not significantly affect silking date, root lodging, ear length and diameter and the number of ears per plant and per 10 ares. The results indicate that the optimum plant density is approximately 6500 plants per 10 ares, regardless of tiller removal and tillers are not to be removed at any plant density.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.348-348
• /
• 2017

This experiment was conducted to investigate the aspect of tiller occurrence, growth and yield of sorghum according to planting density and sowing date. The subject of this experiment is to supply basic data to inhibit non-productive tillers uneconomical and cumbersome for mechanical harvesting. Also another subject was to evaluate optimum planting density and sowing date in central district area. Total number of tillers was more in 80cm ridge than 60cm ridge and it was increased as the planting distance was wider from 15cm to 30cm on the each ridge. Ratio of effective tillers was higher in 60cm ridge than 80cm ridge and it was decreased as planting distance was wider from 15cm to 30cm. The lower the planting density, the more increased total number of tillers, whereas effective tillers were decreased as planting density was high. Average of total number of tillers of three varieties was higher in sowing date of 2 May (1st sowing date), whereas ratio of effective tillers was the highest in sowing date of 23 May (2nd sowing date). Hwanggeumchal showed the highest total number of tillers (1.2 tillers), while Moktaksusu had the lowest total number of tillers (0.8 tillers) among three varieties. There were no significant difference between planting density and days to heading and ripening date from seeding. Culm length increased as planting density was high, but ear length, grains per ear and 1000 grain weight were decreased on the other hand. The highest yield of sorghum per 10a was obtained from $60{\times}20cm$ planting density among 6 planting densities.

• Weed & Turfgrass Science
• /
• v.3 no.4
• /
• pp.347-353
• /
• 2014

This study was conducted to investigate the effects of composted liquid manure (CLM) on soil properties and turf quality of zoysiagrass. The CLMs were produced at 5 facilities for livestock excretions treatments located in Cheongwon, Gunwi, Iksan, Nonsan, and Yeoju in Korea, respectively. Field experiments were conducted at 5 golf courses and a sod farm located near each facility for livestock excretion treatments. Chemical fertilizer (CF) with N at $12g\;m^{-2}year^{-1}$ and CLMs were applied four times, respectively. The constituents of the different CLMs were variable based on when and where the fertilizer was produced. Soil K content significantly increased when the soil was treated with CLMs. The soil treated with CF showed a higher content of total P than that treated with CLM. CF and CLMs treatments significantly increased the turf color index compared with control. Tiller density and shoot dry weight of fertilized plots were also higher than those of non-fertilized plots. However, there was no significant difference in turf color index and tiller density among plots treated by CLMs or CF. The results of this study demonstrated that CLMs could be a substitute for CF.

• Plant Resources
• /
• v.4 no.1
• /
• pp.31-35
• /
• 2001

Major characteristics of new Waesungri maize inbred line has multi-tiller and ears: five to six tillers and seven to eight ears per plant and flowering date of Waesungri was delayed about 18 and 24 days compared to Mo17 U.S line and IK$_4$ Korean local lines, respectively. Number of ears, fresh and dry weight per plant were significantly different among all tested hybrids including Waesungri/Sinkihong hybrid under different planting times and densities. Especially, both fresh and dry weight of IK$_1$/FR140//Waesungri F$_1$hybrid were significantly higher at high planting density. In kernel weight per unit area, Wnesungri/Sinkihong hybrid was high at high density and IK$_1$/FR140//Waesungri hybrid was high at low planting density. As results of analysis of variance, flowering date was shown a significantly different both planting times and varieties, while other characters including stem height were shown very variable in interactions with enviromental factors.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.2
• /
• pp.106-111
• /
• 1999

To investigate the effects of planting density and nitrogen level on growth and yield potential of newly bred heavy panicle japonica rice with large grain (Iksan 435 and Iksan 438) or many spikelets per panicle(HR14022-21-8-4 and HR14022-21-8-6), four heavy panicle type rices and two many panicle type rices(Dongjinbyeo and Donganbyeo) as the checks were planted under standard planting density (30$\times$15 cm) and dense planting density (15$\times$15 cm) with two nitrogen levels of standard nitrogen level(110 kg h $a^{-1}$) and heavy nitrogen level(165 kg h $a^{-1}$). Effective tiller rate decreased in dense planting or heavy nitrogen, when compared to standard nitrogen and planting, while leaf area index and to dry weight increased in dense planting or heavy nitrogen. Tiller numbers and panicle numbers were more increased by dense planting than heavy nitrogen, whereas spikelet numbers were more increased by heavy nitrogen than dense planting. Ripened grain ratio was slightly lower only in dense planting. 1,000 grain weight in brown rice was not significantly different in dense planting or heavy nitrogen. Milled rice yield was highest in heavy nitrogen with standard planting for heavy panicle type rice, while yield for many panicle type rice was highest in heavy nitrogen with dense planting, suggesting that many panicle type rice possesses higher adapt-ability for dense planting than heavy panicle type rice. Path coefficient analysis revealed that top dry weight, spikelet number and grain weight were the greatest positive contributors to yield, whereas tiller number was negative to yield.d.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.3
• /
• pp.294-301
• /
• 1987

This experiment was carried out to investigate the occurrence of tiller and its proportion to grain yield under 5 different plant densities. Plant density 5 x 5cm was more favorable for increasing the number of spikes per unit area, where leads to improve grain yield. Effective tillers showed only main stem, M$_1$-axil and M$_2$-axil, indication more effective tillers in M$_1$ rather than main stem. Every tillers held at least 6 leaves to bear spikes, indicating that main stem has 12 -13 leaves. Leaves attached on main stem M$\sub$0/ and M$_1$ were very important as main source of photosynthesis, especially under more compart plant densities while leaves of M$_1$ occupied 66.8% in a plant. The proportion of grain yield of each tiller to total grain yield per plant was high in main stem under conpact plant density, in M$_1$ stems under less compact plant density, and in M$_2$ -stems under wide plant density, indicating same result on multiple regression analysis.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.2
• /
• pp.78-85
• /
• 1993

This experiment was carried out to select for the varieties with high environmental adaptability in mountainous pastures of Taekwalyong area, and the evaluation was based on the data of varietal differences of dry matter production and yield components in Tall fescue cutting at various developmental stages in growth period of autumn. The results were summarized as follows; 1. The varieties with high number of tillers per plant(NT) showed a high dry weight of plant(DW) in all autumn cuttings. These varieties(Barce1 and Fuego) may be more adaptable to mountainous pastures of Taekwalyon area than other varieties. 2. The number of tillers per plant(NT) was significantly positive correlated with dry weight of plant (DW), but dry weight of tiller(WT) was not significantly correlated with dry weight of plant(DW) in all autumn cuttings. 3. The multiple regression equations of autumn cutting stages with mean dry weight of plant(DW) and number of tillers per plant(NT) can be used to estimate the cutting time to obtain maximum mean dry weight of plant(DW) and the highest number of tillers per plant(NT). The maximum mean dry weight of plant(DW) and the highest number of tillers per plant(NT) was estimated at the time of 21 Oct. and 26 Oct, respectively. 4. Dead leaves tended to increase greatly after the 2nd cutting(l4 Oct.) in growth period of autumn. 5. The number of tillers per plant(NT) was an important yield component before tiller density achieved equilibrium, but dry weight of tiller(WT, including dead leaves) was of most significant as a yield determinant after maximum tiller density reached in growth period of autumn.