• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.4
• /
• pp.428-433
• /
• 1989

The objective of this experiment was to determine if there were feasible to transplant infant rice seedling for machine transplanting. Cultivars tested were Sobaegbyeo and Daecheongbyeo, ]aponica type cultivars. Infant seedling, young seedling and semi-adult seedling were raised with sailor rock wool in seedling tray from 1986 to 1988. Infant rice seedling raised more than 4 days after sowing with rock wool was uniform, and low in ratio of missing hill at machine transplanting. Tiller number per m$^2$ was more in infant rice seedling, young seedling and semi-adult seedling, in that order. Heading dates were not significantly different among seedlings applied, however rice plant sown directly was later 4 or 5 days than any other seedlings. Panicle number per m$^2$ was more in infant seedling than in semi-adult seedling, but ripened ratio was lower in infant seedling due to lodging. Thus there were not greatly different in yield among seedlings tested. Therefore infant rice seedling (more than 5cm in plumule length) raised for 7 days was most optimum, and rock wool would be used as a nursery soil instead of nursery soil for raising infant rice seedling in machine transplanting.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.1
• /
• pp.41-51
• /
• 1991

This study was conducted to determine the effect of 20 years long term fertilizations on the physical and chemical properties of paddy soil and the growth, yield, yield components and grain development of rice. Non-fertilized, PK, NK, NP, NPK, NPK + compost, NPK+straw and NPK+lime have been applied since 1968 after surface paddy soil was removed. NPK+compost and NPK+straw applications increased the content of organic matter, available P and CEC, and lime increased soil acidity and SiO$_2$ content. While chemical contents in non-fertilized treatment were low as compared with other treatments. Soil porosity was higher in NPK+straw (51.4%) and NPK+lime(53.1%) than in NPK application (49.8%). Soil hardness was highest in the NPK application and was lowest in the NPK + lime. Continuous application of straw with NPK markedly increased the content of aggregate with over 1mm(19.6%) as compared with NPK application (7.1%). Plant height, tiller number, root number, leaf area index and total dry weight were higher in the applications of compost, straw and lime with NPK than in any other treatments. Brown rice yield in non-fertilized, PK and NP applications was decreased 45, 55, 15 and 5% of that in NPK application, respectively, while application of compost, straw and lime with NPK increased the yield by 11, 14 and 4%, respectively, during 20 years. The number of differentiated rachis branchs in the application of compost, straw and lime was 17 to 21 and that in the other application was 13 to 15, whereas the degenerated rachis branchs was low in the application of compost, straw and lime with NPK. The applications having higher level of perfect rice grain such as non-fertilized, NPK+compost, NPK+straw and NPK+lime had high grain weight and had low level of white core rice, white belly rice. The white core and belly rice was highest in the NP application and notched belly rice kernel was markedly increased in NK and NP applications. The period of grain filling was 30 DAH at NP and NPK applications, 35 DAH at NK and NPK+lime, 40DAH at NPK+compost and NPK+ straw, and 45DAH at non-fertilized, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.1
• /
• pp.1-8
• /
• 1992

This study was conducted to obtain the basic information on salt-tolerance of rice cultivars in relations with growth retardation and cation content. As the salt-level increased, less retardation in plant height and dry weight were shown in salt-tolerant than salt-susceptible rice cultivars. Salt tolerant cultivars showed lower N $a^{+}$ and higher $K^{+}$ content and lower N $a^{+}$ / $K^{+}$ ratio at each salt-levels than salt-susceptible ones, while there were no significant differences in $Ca^{++}$ and $Mg^{++}$ content. At the tillering stage, the plant height and dry weight of the salt-treated plots were significantly correlated with N $a^{+}$ and $K^{+}$ content and N $a^{+}$ / $K^{+}$ ratio, implying that N $a^{+}$ and $K^{+}$ content could be an indicator of salt-tolerance of a rice cultivar. There were no tiller-depending differences in cation content in all cultivars. N $a^{+}$ content and N $a^{+}$ / $K^{+}$ ratio in leaves were lower at the top and higher at the bottom. In three $F_1$ hybrids between salt tolerant parent Pokkali and three salt susceptible parents, plant height, dry weight, $K^{+}$ content and N $a^{+}$ / $K^{+}$ ratio were similar to those of Pokkali parent, while N $a^{+}$ content was intermediate of the parents. So, it seemed that salt tolerance is dominant over salt susceptibility. In $F_2$ of Pokkali/wx817 cross, genetic segregation of plant height, dry weight, $K^{+}$ content and N $a^{+}$ / $K^{+}$ ratio varied continuously and was biased onto Pokkali side, while that of N $a^{+}$ content showed normal distribution with intermediate mode. Broad-sense heritability of the characters ranged from 0. 604 to 0. 811. Genotypic and phenotypic correlation coefficients among them were relatively high.fficients among them were relatively high.h.h.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.21 no.1
• /
• pp.49-59
• /
• 2019

The field trial was performed to evaluate the rice growth and yield in different direct seeding methods after Italian Ryegrass Harvest The required time for seed emergence was for 7 ~ 8days in the tested direct seeding methods and there was high in seedling establishment in order of wet hill-seeding with iron-coated seeds > water seeding with iron-coated seeds > wet hill-seeding with soil coverage with pregerminated seeds. The rice plant height was shorter in the tested direct seeding methods than that of machine transplanting until 45day after seeding but there was not significant difference in terms of statistical analysis at 63day after seeding. The growth of tiller number in the rice plant was high in water seeding with iron-coated seeds and wet hill-seeding with soil coverage and low in wet hill-seeding with iron-coated seeds compared to machine transplanting. The yield component in the tested direct seeding methods was not significant difference in terms of statistical analysis. The milled rice yield in the tested direct seeding methods was higher 2 ~ 8% being with 4.94 ~ 5.24t/ha than that of machine transplanting but there was not significant difference in terms of statistical analysis. The percentage of head rice was low in the tested direct seeding methods compared to machine transplanting. The weedy rice was not occurred in the tested rice cultivation methods. In conclusion the direct seeding method would be recommended to be a suitable to in following by Italian ryegrass harvesting in southern area of Korea in terms of reduction in production cost and high income basis for rice growing farmers.

• Korean Journal of Agricultural Science
• /
• v.13 no.1
• /
• pp.1-16
• /
• 1986

This experiment was carried out to obtain genetic information for future corn breeding. The materials used for the study were obtained from the nationwide collection of Korean local corn lines. A total of 262 lines were used for the study of morphological characters and for the classification of lines. Results obtained are summarized as follows; 1. The days to flowering of lines ranged from 57 days to 87 days. Most lines had an average of 67 days of flowering days. 2. The number of tillers of lines showed a lot of variation among lines with 49.2% of coefficient of variation. 3. The coefficients of variation computed based on the phenotypic observation or measurement of each line were 36.1%, 27.2%, 20.0%, 16.4% and 16.3% for kernel weight per ear, 100 kernel weight, ear height, plant height and ear length, respectively. 4. Ear height, ear length, ear diameter, tiller number and days to flowering were highly and positively correlation with the plant height. Kernel size, ear size, and plant height were highly correlated with 100 kernel weight and kernel weight per ear. 5. The 262 corn lines were possibly classified into four major groups by the Euclidean distance. Group I comprised 110 lines, group II 74 lines, group III 66 lines and group IV 12 lines, respectively. Group I was characterized as having early maturity, medium plant height large kernel size and large ear size. Group II had medium maturity, short plant height, medium kernel size and small ear size. Group III had medium maturity, medium plant height, large kernel size and medium ear size. Group IV had late maturity, long plant height, small kernel size, small ear size and many tillering. 6. The plant height showed significant difference between group I and II, II and III, and II and IV group. No statistical differences were observed between group III and IV. The ear size of group I was significantly different from those of group II, III and IV. Also difference of ear size between group II and III was significant. The kernel size, 100 kernel weight and kernel weight per ear were all significantly different among all groups classified. The row number was different between group I and II. The row number of lines in group IV was significantly different with group I, II, III respectively. The number of tillers and flowering days of lines in group IV were greatly different from those of group I, II and III. 7. The corn lines collected from northwest plain regions and middle hilly regions in Korea had medium maturity, medium plant height, large ear and large kernels. The corn lines from middle eastern hilly regions had medium size of ear kernels. The corn lines from middle southern hilly regions had late maturity, small kernel size and many tillers. The corn lines from southwest plain areas had late maturity, long plant height and many tillers.

• Korean Journal of Weed Science
• /
• v.17 no.3
• /
• pp.288-294
• /
• 1997

Field and pot expeiments were carried out to evaluate the interaction between quinclorac and bensulfuron-methyl on growth of the rice plants(Oryza sativa L. cv. Choocheongbyeo) at 20, 45, 65 days-old stages. Quinclorac and bensulfuron-methyl showed antagonistic interaction at both stages, which were detected by the Chisaka's method at isobles of 10% growth inhibition. The antagonism indices were -0.63 and -1.67 at 20 and 65 days-old seedling stages, respectively. Leaf-rolling of rice occurred when quinclorac was applied at 600g ai/ha or more at 20 days-old seedling stage, while it occured at the dose of 900g ai/ha at 65 days-old stage. Bensulfuron-methyl reduced plant height and dry weight as well as tiller production at both stages. Leaf-rolling of rice was reduced when mixture of quinclorac and bensulfuron-methyl was applied due to antagonism of the two herbicides. High temperatures increased the phytotoxicity of bensulfuron-methyl, while the phytotoxicity caused by quinclorac alone was not responsive to temperature. The antagonistic effect between quinclorac and bensulfuron-methyl increased at low temperature as tested by the Colby's method.

• Korean Journal of Agricultural Science
• /
• v.20 no.2
• /
• pp.167-180
• /
• 1993

Most of small size diesel engines are widely used with the same size and weight flywheel in the levels of 6.0kW and 7.5kW. This study was conducted to obtain basic data which affect the engine performance of the power tiller. The flywheel weight was considered as a major factor in this research. Basically, fuel consumption ratio, motoring loss, torque, vibration and mechanical efficiency of the engine were measured and analyzed on four levels of flywheel weight, 32.2, 29.4, 26.2 and $24.2kg_f$, respectively. Results were obtained as follows: 1. The weights of flywheel were $23.7kg_f$ from design program of JSME and $24.5kg_f$ from ASME and SAE design criteria. Therefore, the flywheel weight of $32.2kg_f$ might be reduced about $8kg_f$ in 7.5kW engine. 2. The rated outputs of 6.0kW and 7.5kW engine were actually 7.43kW and 7.85kW, respectively. When flywheel weight was reduced from $32.2kg_f$ to $24.2kg_f$, outputs were increased from 7.43kW to 7.70kW in 6.0kW engine and from 7.85kW to 8.25kW in 7.5kW engine. 3. When the flywheel weight was reduced from $32.2kg_f$ to $24.2kg_f$, fuel consumption ratio was decreased from 300.8 to 296.8g/kW-hr in 6.0kW engine and also from 313.6 to 312.8g/kW-hr in 7.5 kW engine, respectively. 4. When the flywheel weight was reduced from $32.2kg_f$ to $24.2kg_f$, mechanical efficiency of engine was increased from 76.1% to 76.8% in 6.0kW engine and also from 76.7% to 77.0% in 7.5kW engine, respectively. 5. When the flywheel weight was reduced from $32.2kg_f$ to $24.2kg_f$, vibration was decreased at X-axis and Z-axis in 6.0kW engine, however, slightly increased at Y-axis in 6.0kW engine and at all axes in 7.5kW engine. 6. When the flywheel weight was reduced from $32.2kg_f$ to $24.4kg_f$ motoring loss was decreased from 2.33kW to 1.75kW in 6.0kW engine and also from 2.46kW to 1.84kW in 7.5kW engine.

• Korean Journal of Agricultural Science
• /
• v.15 no.2
• /
• pp.143-152
• /
• 1988

This study was conducted to obtain basic data which affected engine performance of the power tiller being widely used in the rural area. Among the various factors affected engine performance, only flywheel weight was considered as the major factor in this study. Fuel consumption ratio, motoring loss, torque, vibration and mechanical efficiency of the engine tested were measured and analyzed on the four levels of flywheel weight (32.2, 29.7, 26.4, 24.2 kg). The results obtained were as follows: 1. The maximum output of 6 and 7.5 kW engine was 7.43 kW and 7.85 kW respectively. When flywheel weight was reduced from 32.2 kg to 24.2 kg, output power of the engine was increased 0.27 kW in 6 kW engine and increased 0.39 kW in 7.5 kW engine. 2. The fuel consumption ratio was decreased from 300.8 to 296.8 g/kW-hr in 6 kW engine and decreased from 313.6 to 312.8 g/kW-hr in 7.5 kW engine when the flywheel weight was reduced from 32.2 kg to 24.2 kg. 3. The mechanical efficiencies of the engine was increased from 76.1 to 76.8% in 6 kW engine and increased from 76.7 to 77.0% in 7.5 kW engine when the flywheel weight was reduced from 32.2 kg to 24.2 kg. 4. When the flywheel weight was reduced from 32.2 kg to 24.2 kg, a tendency of a little decrease of vibration at X- and Z-axis in 6 kW engine and of a little increase of vibration at Y-axis in 6 kW engine and all directions in 7.5 kW engine was observed. 5. Motoring losses was decreased from 2.33 to l.76 kW in 6 kW engine and decreased from 2.46 to 1.84 kW in 7.5 kW engine when the flywheel weight was reduced from 32.2 kg to 24.2 kg. From the above results and the flywheel weight calculated theoretically, it was recommendable that the flywheel weight should be reduced about 7 kg in 6 kW engine and about 10 kg in 7.5 kW engine, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.s02
• /
• pp.45-65
• /
• 1989

The Korean peninsular having the complexity of the photography and variability of climate is located within passing area of a lots of typhoon occurring from the southern islands of Philippines. So, there are various patterns of wind and flooding damages in paddy field occuring by the strong wind and the heavy rain concentrated during the summer season of rice growing period in Korea. The wind damages to rice plants in Korea were mainly caused by saline wind, dry wind and strong wind when typhoon occurred. The saline wind damage having symptom of white head or dried leaves occurred by 1.1 to 17.2 mg of salt per dry weight stuck on the plant which was located at 2. 5km away from seashore of southern coastal area during the period(from 27th to 29th, August, 1986) of typhoon &Vera& accompanying 62-96％ of relative humidity, more than 6 m per second of wind velocity and 22.5 to 26.4$^{\circ}C$ of air temperature without rain. Most of the typhoons accompanying 4.0 to 8. 5m per second of wind and low humidity (lesp an 60％) with high temperature in the east coastal area and southen area of Korea. were changed to dry and hot wind by the foehn phenomenon. The dry wind damages with the symptom of the white head or the discolored brownish grain occurred at the rice heading stage. The strong wind caused the severe damages such as the broken leaves, cut-leaves and dried leaves before heading stage, lodging and shattering of grain at ripening stage mechanically during typhoon. To reduce the wind damages to rice plant, cultivation of resistant varieties to wind damages such as Sangpoongbyeo and Cheongcheongbyeo and the escape of heading stage during period of typhoon by accelerating of heading within 15th, August are effective. Though the flood disasters to rice plant such as earring away of field, burying of field, submerging and lodging damage are getting low by the construction of dam for multiple purpose and river bank, they are occasionally occurred by the regional heavy rain and water filled out in bank around the river. Paddy field were submerged for 2 to 4 days when typhoon and heavy rain occurred about the end of August. At this time, the rice plants that was in younger growing stage in the late transplanting field of southern area of Korea had the severe damages. Although panicles of rice plant which was in the meiotic growing stage and heading stage were died when flooded, they had 66％ of yield compensating ability by the upper tilling panicle produced from tiller with dead panicle in ordinary transplanting paddy field. It is effective for reduction of flooding damages to cultivate the resistant variety to flooding having the resistance to bacterial leaf blight, lodging and small brown planthopper simultaneously. Especially, Tongil type rice varieties are relatively resistant to flooding, compared to Japonica rice varieties. Tongil type rice varieties had high survivals, low elongation ability of leaf sheath and blade, high recovering ability by the high root activity and photosynthesis and high yield compensating ability by the upper tillering panicle when flooded. To minimize the flooding and wind damage to rice plants in future, following research have to be carried out; 1. Data analysis by telemetering and computerization of climate, actual conditions and growing diagnosis of crops damaged by disasters. 2. Development of tolerant varieties to poor natural conditions related to flooding and wind damages. 3. Improvement of the reasonable cropping system by introduction of other crops compensating the loss of the damaged rice. 4. Increament of utilization of rice plant which was damaged.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.21 no.1
• /
• pp.136-179
• /
• 1976

Effects of seeding pattern and rate on the yield and some agronomic characters of barley under different cultural conditions were observed at Suweon, Daejeon and Jinju during the barley growing season from 1972 to 1974. Plant height and culm length were increased by dense seeding, shading, heavy fertilization, moving location down to the lower latitude. The tiller number per plant, dry matter weight, leaf number on main stem, percentage of valid tillers, RGR, NAR, and $R_{A}$ were increased by heavy fertilization, sparse seeding, reduced furrow width and drilling likewise the length, width and angle of leaf. The newer cultivar had higher RGR and NAR. The higher yielding cultivars had higher potential for carbohydrate assimilating ability. Straw weight and grain yield were increased by dense seeding, reduced furrow width, drilling, heavier fertilization and moving the location to the south, and then decreased by shading and late seeding. High yield increase by drilling was found in late seeding. The optimum seeding rate for the yield increase were 15l/10a for furrow and 25l/10a for drilling. The spike number type cultivars were favourable for the sparse seeding and the spike weight type cultivars seemed to be suitable to the dense seeding, The repeatability of days to heading due to location and fertilizer level was higher than that of seeding time and seeding method. Repeatability of culm length was extremly high in seeding method and comparatively high in fertilizer level while low in location. The repeatability of yield due to location and seeding methods was comparatively high, but the tendency was different along with different cultivars. Also the repeatability of yield due to the fertilizer level was generally high except cultivar Haganemngi.