• Journal of the Korea Society for Simulation
• /
• v.24 no.3
• /
• pp.77-87
• /
• 2015

Defense M&S (Modeling & Simulation) is utilized as a realistic method to analyze MOE (Measure of Effectiveness) of weapon systems by modeling weapons and their operational environment on the computer, and simulating them under various war scenarios. As weapon systems become complex in their structure and dynamics, model engineering are experiencing difficulties to construct simulation models on a computer. A model repository helps model developers to save model development time and cost by systematically storing predefined and already validated models. However, most repositories for Defense M&Shave not been successful partly due to limited accessability, vulnerability to security threats, and low level of dependability. In this paper, we propose W-Cloud (Weapon Cloud), a cloud model repository for reusing predefined weapon models. Clients can access W-Cloud on any platforms and various devices, yet security and confidentiality concerns are guaranteed by employing multi-tier information protection mechanism.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.4
• /
• pp.258-266
• /
• 2023

This study analyzed methodologies for estimating carbon stocks of perennial woody crops and the research cases in overseas countries. As a result, we found that Australia, Bulgaria, Canada, and Japan are using the stock-difference method, while Austria, Denmark, and Germany are estimating the change in the carbon stock based on the gain-loss method. In some overseas countries, the researches were conducted on estimating the carbon stock change using image data as tier 3 phase beyond the research developing country-specific factors as tier 2 phase. In South Korea, convergence studies as the third stage were conducted in forestry field, but advanced research in the agricultural field is at the beginning stage. Based on these results, we suggest directions for the following four future researches: 1) securing national-specific factors related to emissions and removals in the agricultural field through the development of allometric equation and carbon conversion factors for perennial woody crops to improve the completeness of emission and removals statistics, 2) implementing policy studies on the cultivation area calculation refinement with fruit tree-biomass-based maturity, 3) developing a more advanced estimation technique for perennial woody crops in the agricultural sector using allometric equation and remote sensing techniques based on the agricultural and forestry satellite scheduled to be launched in 2025, and to establish a matrix and monitoring system for perennial woody crop cultivation areas in the agricultural sector, Lastly, 4) estimating soil carbon stocks change, which is currently estimated by treating all agricultural areas as one, by sub-land classification to implement a dynamic carbon cycle model. This study suggests a detailed guideline and advanced methods of carbon stock change calculation for perennial woody crops, which supports 2050 Carbon Neutral Strategy of Ministry of Agriculture, Food, and Rural Affairs and activate related research in agricultural sector.

• Journal of the Korean Society of Costume
• /
• v.64 no.7
• /
• pp.29-44
• /
• 2014

This thesis aims to compare the representative costume patterns of the Chinese Qing dynasty and contemporary $18^{th}$ century French costumes. As a research method, qualitative research was performed to compare and analyze the patterns of the flowers, the birds and pagoda shown in Qing dynasty and France. The results are as follows: The Chinese flower patterns used the embroidery technique for 3-step gradation colors to decorate flowers with less than 10 petals. Also, the forms of the flowers were large and simple in China. The flower patterns of the 18th century France is more similar to those of Qing dynasty than to the traditional French flower patterns. They used the drawing technique for the gradation colors and completed the work by embroidery. In the case of bird patterns, the crane on menswear, and the phoenix on women's wear were applied to signify the symbolic feature of the Chinese symbolism. On the other hand, those in France were used solely for the division of the gender. As a result the clear form of the birds in China contrasted with the unclear forms of birds in France. During the influx of mandarine square to France from China, the application of crane and phoenix according to gender seems to be stressed emphatically without considering their symbolic meaning. In light of the pagoda pattern, Qing dynasty showed interest only in the form of pagoda, denoting the simple two-tier structure without detailed description. Whereas in France, the pagodas were three or four tiers, with gorgeous colors and much more detail than those of Qing dynasty. In conclusion, the main determinants of influences on the patterns of France from China would be forms, colors, constructions and technique of embroidery, along with the disregard for symbolic significance.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1209-1215
• /
• 2022

The selective catalytic reduction (SCR) is known as a very efficient method to reduce nitrogen oxides (NOx) and the catalyst performs reduction from nitrogen oxides (NOx) to nitrogen (N₂) and water vapor (H2O). The catalyst, which is one of the factors determining the performance of the nitrogen oxide (NOx) ruduction method, is known to increase catalyst efficiency as cell density increases. In this study, the reduction characteristics of nitrogen oxides (NOx) under various engine loads investigated. A 100CPSI(60Cell) catalysts was studied through a laboratory-sized simulating device that can simulate the exhaust gas conditions from the power generation engine installed in the training ship SEGERO. The effect of 100CPSI(60Cell) cell density was compared with that of 25.8CPSI(30Cell) cell density that already had NOx reduction data from the SCR manufacturing. The experimental catalysts were honeycomb type and its compositions and materials of V₂O₅-WO₃-TiO₂ were retained, with only change on cell density. As a result, the NOx concentration reduction rate from 100CPSI(60Cell) catalyst was 88.5%, and IMO specific NOx emission was 0.99g/kwh satisfying the IMO Tier III NOx emission requirement. The NOx concentration reduction rate from 25.8CPSI(30Cell) was 78%, and IMO specific NOx emission was 2.00g/kwh. Comparing the NOx concentration reduction rate and emission of 100CPSI(60Cell) and 25.8CPSI(30Cell) catalysts, notably, the NOx concentration reduction rate of 100CPSI(60Cell) catalyst was 10.5% higher and its IMO specific NOx emission was about twice less than that of the 25.8CPSI(30Cell) catalysts. Therefore, an efficient NOx reduction effect can be expected by increasing the cell density of catalysts. In other words, effects to production cost reduction, efficient arrangement of engine room and cargo space can be estimated from the reduced catalyst volume.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.3
• /
• pp.344-356
• /
• 2009

To identify subjective health status of senior citizens' oral health following senior citizens' general characteristics and knowledge and behavior for the oral hygiene, this research conducted individual interview with 237 senior citizens in some parts of Seoul. The results are as follows. 1. Degree of senior citizens' knowledge on the oral hygiene is about Middle. Among the categories on the senior citizens' knowledge on the oral hygiene, teeth's brushing was the highest while knowledge on fluorine was the lowest. 2. Senior citizens who feel that their oral health is healthy when it comes to the subjective health state of senior citizens' oral health following behavior for the oral hygiene, brush their teeth, three times in a day, for more than three minutes (p<.01). Moreover, senior citizens who feel that their oral health is healthy brush different corners of the tongue when brushing (p<.01). 3. In case of knowledge on the oral hygiene following general characteristics, knowledge on the oral hygiene was higher when economic status was higher (p<.01). In case of living expenses, knowledge on the oral hygiene was higher for the senior citizens with pay or income (p<.01). 4. In case of behavior for the oral hygiene, women tended to act for the oral hygiene more than men. As for the method for raising living expenses, senior citizens who receive basic social security check or those at the highest tier tended to act less for the oral hygiene (p<.01). 5. Senior citizens who answered that their oral health is healthy when it comes to the subjective health state of senior citizens' oral cavity tended to have high knowledge on the oral hygiene (p<.01). In conclusion, subjective health status of senior citizens' oral health is higher when the knowledge on the oral hygiene and behavior for the oral hygiene are higher. Accordingly, it is necessary to develop and execute oral hygiene training program to change senior citizens' behavior incrementally and the dental hygienists who can conduct this training should be actively attracted into the senior citizens' oral hygiene training.

• Design Convergence Study
• /
• v.14 no.6
• /
• pp.29-55
• /
• 2015

This study aimed to examine and compare housing conditions and satisfaction degree of working college students in Seoul metropolitan area, depending on their stress level from economic burden and living housing type. The interview using the questionnaire was conducted. The subjects were 199 working college students aged between 19 and 35. The two-tier cluster sampling method were used, the region and representative university within the region. The comparison of satisfaction degree per type of housing of working college students has been conducted to find 3 characteristic patterns of satisfaction degree per housing condition from the stress of preparing the fund for rent, and students with high degree of stress from arranging rent showed relatively low degree of satisfaction in most items. 6 patterns have been identified in terms of housing types, and most of the students living in the Gosiwon, the poorest condition and housing type, showed the lowest degree of satisfaction, while those residing in the officetel turned out to the most satisfied. This study gives implications of housing welfare for working college students.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.1
• /
• pp.50-63
• /
• 2007

The development of domestic plant specific emission factors is very important to estimate reliable national emissions management. This study, for the reason, was carried out to obtain advances emission factor for Carbon Dioxide ($CO_2$) by source-specific emission tests from the iron and steel industry sector which is well known as one of the major sources of greenhouse gases ($CO_2$). Emission factors estimated in this study were compared with those of IPCC for evaluation and they were found to be of similar level in the case of $CO_2$. There was no good information available on $CO_2$ plant specific emission factors from the iron and steel industry in Korea so far. The major emission sources of $CO_2$ examined from the iron and steel manufacturing precesses were a hot blast stove, coke oven, sintering furnace, electric arc furnace, heating furnace, and so on. In this study, the concentration of $CO_2$ from the hot blast stove process was the highest among all processes. The $CO_2$ emission factors for a ton of Steel and Iron products (using B-C oil) were estimated to be 0.315 $CO_2$ tonne (by Tier 3 method) and 4.89 $CO_2$ tonne. In addition, emission factor of $CO_2$ for heating furnace process was the highest among all process. Emission factors estimated in this study were compared with those of IPCC for evaluation and they were found to be of similar level in the case of $CO_2$.

• Journal of architectural history
• /
• v.19 no.3
• /
• pp.7-29
• /
• 2010

The form of the Wangheungsa Temple's wooden pagoda site is that of the traditional form of the wooden pagodas constructed during the Baekjae Period. Likewise, it is an important ruin for conducting research on the form and type of the wooden pagodas constructed during the Baekjae Period. In particular, the method used for the installation of the central pillar's cornerstone is a new technique. The purpose of this research is to restore the ruin of the Wangheungsa Temple's wooden pagoda of the Baekjae Period that remains at the Wangheungsa Temple's wooden pagoda site. Until now, research conducted on the wooden pagoda took place mostly centered on the Hwangryongsa Temple's wooden pagoda. Meanwhile, the reality concerning Baekjae's wooden pagoda is one in which there were not many parallel cases pertain to the design for restoration. This research paper wants to conduct academic examination of the Wangheungsa Temple's wooden pagoda to organize the intention of design and design process in a simple manner. This research included review of the Baekjae Period's wooden pagoda related ruins and the review of the existing wooden pagoda ruin to analyze the wooden pagoda construction technique of the era. Then, current status of the Wangheungsa Temple's wooden pagoda site is identified to define the characteristics of the wooden pagoda, and to set up the layout format and the measure to estimate the size of the wooden pagoda in order to design each part. Ultimately, techniques and formats used for the restoration of the wooden pagoda were aligned with the wooden pagoda of the Baekjae Period. Basically, conditions that can be traced from the current status of the Wangheungsa Temple site excavation using the primary standards as the standard. Wangheungsa Temple's wooden pagoda was designed into the wooden pagoda of the Baekjae's prosperity phase. The plane was formed into $3{\times}3$ compartments to design into three tier pagoda. The height was decided by factoring in the distance between the East-West corridors, size of the compartment in the middle, and the view that is visible from above the terrace when entering into the waterway. Basically, the origin of the wooden structure format is based on the Goguryeo style, but also the linkage with China's southern regional styles and Japan's ancient wooden pagoda methods was factored in. As for the format of the central pillar, it looks as if the column that was erected after digging the ground was used when setting up the columns in the beginning. During the actual construction work of the wooden pagoda, central pillar looks as if it was erected by setting up the cornerstone on the ground. The reason that the reclaimed part of pillar that use the underground central cornerstone as the support was not utilized, was because the Eccentric Load of the central pillar's cornerstone was factored in the state of the layers of soil piled up one layer at a time that is repeated with the yellow clay and sandy clay and the yellow clay that were formed separately with the $80cm{\times}80cm$ angle at the upper part of the central pillar's cornerstone was factored in as well. Thus, it was presumed that the central pillar was erected in the actual design using the ground style format. It is possible to presume the cases in which the reclaimed part of pillar were used when constructed for the first time, but in which central pillar was installed later on, after the supplementary materials of the underground column is corroded. In this case, however, technique in which soil is piled up one layer at a time to lay down the foundation of a building structure cannot be the method used in that period, and the reclamation cannot fill up using the $80cm{\times}80cm$ angle. Thus, it was presumed that the layers of soil for building structure's foundation was solidified properly on top of the central pillar's cornerstone when the first wooden pagoda construction work was taking place, and that the ground style central pillar was erected on its upper part by placing the cornerstone once again. Wangheungsa Temple's wooden pagoda is significant from the structure development aspect of the Korean wooden pagodas along with the Hwangryongsa Temple's wooden pagoda. Wangheungsa Temple's wooden pagoda construction technique which was developed during the prosperity phase of the Baekjae Period is presumed to have served as a role model for the construction of the Iksan Mireuksa Temple's wooden pagoda and Hwangryongsa Temple's wooden pagoda. With the plan to complement the work further by excavating more, the basic wooden pagoda model was set up for this research. Wangheungsa Temple's wooden pagoda was constructed as at the Baekjae Kingdom wide initiative, and it was the starting point for the construction of superb pagoda using state of the art construction techniques of the era during the Baekjae's prosperous years, amidst the utmost interest of all the Baekjae populace. Starting out from its inherent nature of enshrining Sakyamuni's ashes, it served as the model that represented the unity of all the Baekjae populace and the spirit of the Baekjae people. It interpreted these in the most mature manner on the Korean peninsula at the time.

• Korean Journal of Materials Research
• /
• v.8 no.12
• /
• pp.1165-1169
• /
• 1998

A single crystal cast blade was manufactured by CMSX 6, one of the first generarion nickel based single crystal superalloys by the selector method in a vacuum furnace. The single crystal has been grown with cooling rate of 2.5 mm/min, after pouring the molten alloy of 163$0^{\circ}C$ to the mold heated to 150$0^{\circ}C$. The cast structure could be classified into matrix (dendrite) and eutectic regions in ${\gamma}$'shape and size. The eutectic region showed higher Ti content. As the additional results of ${\gamma}$'precipitates by EPMA and CBED analysis the ${\gamma}$'size was less than 0.5~0.7$\mu\textrm{m}$, showing the chemical composition close to Ni$_3$Al of Ll$_2$ lattice structure. But ${\gamma}$'size has increased to bigger than 1.0$\mu\textrm{m}$, being near to eutectic region, changing its shape to bar or huge block types. These showed the chemical structure near to Ni$_3$Ti of D $O_{24}$ lattice structure. Therefore, ${\gamma}$'morphology of dendrite and eutectic regions depends absolutely on its chemical composition and lattice structure.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.236-256
• /
• 2011

Forest carbon stocks change due to land use change is an important data required by UNFCCC(United Nations framework convention on climate change). Spatially explicit estimation of forest carbon stocks based on IPCC GPG(intergovernmental panel on climate change good practice guidance) tier 3 gives high reliability. But a current estimation which was aggregated from NFI data doesn't have detail forest carbon stocks by polygon or cell. In order to improve an estimation remote sensing and GIS have been used especially in Europe and North America. We divided research trends in main countries into 4 categories such as remote sensing, GIS, geostatistics and environmental modeling considering spatial heterogeneity. The easiest way to apply is combination NFI data with forest type map based on GIS. Considering especially complicated forest structure of Korea, geostatistics is useful to estimate local variation of forest carbon. In addition, fine scale image is good for verification of forest carbon stocks and determination of CDM site. Related domestic researches are still on initial status and forest carbon stocks are mainly estimated using k-nearest neighbor(k-NN). In order to select suitable method for forest in Korea, an applicability of diverse spatial data and algorithm must be considered. Also the comparison between methods is required.