• Journal of the Korean housing association
• /
• v.14 no.4
• /
• pp.11-19
• /
• 2003

This study intends to predict prospective defects and establish the plan of Preventive Maintenance through research and analysis of defect occurrences and their repair costs in the public equipment of ‘H’ apartment house from 1998 to 2001. According to results of the analysis, more than 90% of defects and their repair costs for 4 years of the building have occurred in heating, hot water and water supply equipments. In case of specific classification in each equipment, more than 60% of defects were found at hot water pipes and heating pipes, and their repair costs covered more than 60% of the total defect costs. After two repairs by ‘Preventive Maintenance’ had been performed in the year 1998, total defects and defects of each equipment each yew have increased in number from 1999 to 2001. But total repair costs and repair costs of each equipment have not increased as time has gone by, because repair costs have relationship with the price of materials and labor, the part of defect and the scale of repair.

• Journal of the Korean Ceramic Society
• /
• v.54 no.2
• /
• pp.75-85
• /
• 2017

Thermoelectric is a key technology for energy harvesting and solid-state cooling by direct thermal-to-electric energy conversion (or vice versa); however, the relatively low efficiency has limited thermoelectric systems to niche applications such as space power generation and small-scale or high-density cooling. To expand into larger scale power generation and cooling applications such as ATEG (automotive thermoelectric generators) and HVAC (heating, ventilation, and air conditioning), high-performance bulk thermoelectric materials and their low-cost processing are essential prerequisites. Recently, the performance of commercial thermoelectric materials including $Bi_2Te_3$-, PbTe-, skutterudite-, and half-Heusler-based compounds has been significantly improved through non-equilibrium processing technologies for defect engineering. This review summarizes material design approaches for the formation of multi-dimensional and multi-scale defect structures that can be used to manipulate both the electronic and thermal transport properties, and our recent progress in the synthesis of conventional thermoelectric materials with defect structures is described.

• Journal of Chest Surgery
• /
• v.33 no.5
• /
• pp.419-421
• /
• 2000

Noonan syndrome is characterized by typical facies, congenital heart defect, and some clinical features similar to Turner syndrome, but with normal chromosomes. The most commonly associated cardiac defects are pulmonary valvular stenosis and strial septal defect. We experienced a case of Nonan syndrome associated with pulmonay valve stenosis with double-chambered right ventricle and atrial septal defect and cryptorchidism. Pulmonary valvotomy was done through transannular incision. Hypertrophied muscle bundles were excised. Atrial septal defect was closed directly. RVOT was reconstructed with pericardial transannular patch. Orchiopexy was performed simultaneously without any problem.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.2
• /
• pp.170-176
• /
• 2012

In the nuclear industry, wall thinning defect of straight pipe occur the enormous loss in life evaluation and safety evaluation. To use non-destructive technique, we measure deformation, vibration, defect evaluation. But, this techniques are a weak that is the measurement of the wide area is difficult and the time is caught long. In the secondary side of nuclear power plants mostly used steel pipe, artificiality wall thinning defect make in the side and different thickness make to the each other, wall thinning defect part of deformation measure by using shearography. In addition, optical measurement through deformation, vibration, defect evaluation evaluate pipe and thickness defects of pressure vessel is to evaluate quantitatively. By shearography interferometry to measure the pipe's internal wall thinning defect and the variation of pressure use the proposed technique, the quantitative defect is to evaluate the thickness of the surplus. The amount of deformation use thickness of surplus prediction of the actual thickness defect and approximately 7 percent error by ensure reliability. According to pressure the amount of deformation and the thickness of the surplus through DB construction, nuclear power plant pipe use wall thinning part soundness evaluation. In this study, pressure vessel of thickness defect measure proposed nuclear pipe of wall thinning defect prediction and integrity assessment technology development. As a basic research defected theory and experiment, pressure vessel of advanced stability and soundness and maintainability is expected to contribute foundation establishment.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.9
• /
• pp.339-348
• /
• 2021

In recent software defect prediction research, defect prediction between cross projects and cross-version projects are actively studied. Cross-version defect prediction studies assume WP(Within-Project) so far. However, in the CV(Cross-Version) environment, the previous work does not consider the distribution difference between project versions is important. In this study, we propose an automated Bayesian optimization framework that considers distribution differences between different versions. Through this, it automatically selects whether to perform transfer learning according to the difference in distribution. This framework is a technique that optimizes the distribution difference between versions, transfer learning, and hyper-parameters of the classifier. We confirmed that the method of automatically selecting whether to perform transfer learning based on the distribution difference is effective through experiments. Moreover, we can see that using our optimization framework is effective in improving performance and, as a result, can reduce software inspection effort. This is expected to support practical quality assurance activities for new version projects in a cross-version project environment.

• Journal of Chest Surgery
• /
• v.20 no.2
• /
• pp.411-415
• /
• 1987

We have experienced a rare case of traumatic ventricular septal defect caused by fall down injury. The patient suffered from congestive heart failure after trauma and represented new developing typical murmur. Cardiac catheterization revealed a large left-to-right shunt at the ventricular level and a 4.4:1 ratio of pulmonary to systemic flow. Left ventricular angiogram also showed ventricular septal defect low in the muscular septum. At operation, the right ventricle and pulmonary artery were found to be moderately dilated. A marked systolic thrill was palpable over the right ventricle near the apex. Through a small left ventriculotomy an oval defect, 2x.3 cm with a firm scarred margin, was found in the lower muscular ventricular septum. This defect was repaired using Dacron patch and ventriculotomy was closed with long strip of Teflon felt. Postoperative course was uneventful and discharged in good condition.

• Journal of the Korean Data and Information Science Society
• /
• v.19 no.2
• /
• pp.609-620
• /
• 2008

There may be several parallel equipments having the same function in a multi-stage manufacturing process, which affect the product quality differently and have significant differences in defect rate. The product quality may depend on what equipments it has been processed as well as what process variable values it has. Applying one model ignoring the presence of different equipments may distort the prediction of defect rate and the identification of important quality variables affecting the defect rate. We propose a procedure for data segmentation when constructing models for predicting the defect rate or for identifying major process variables influencing product quality. The proposed procedure is based on the principal component analysis and the analysis of variance, which demonstrates a better performance in predicting defect rate through a case study with a PDP manufacturing process.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.6
• /
• pp.487-493
• /
• 2004

In this Paper, we propose a lighting system for the stable detection of check defects of the CRT panel through the analysis of the lighting interaction between the lighting unit and the CRT panel. The check defect is very difficult to detect reliably because of its high sensitivity according to the direction of incident light. At first, we model the physical shape of check defects using SEM image. And then we apply physics based illumination model to investigate the optical characteristics of the check defect. Finally, we propose a lighting system for the stable detection of check defect. Experimental results show the feasibility of the proposed lighting system for check inspection.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.7
• /
• pp.1047-1054
• /
• 2004

Internal defects in the glass, like-as micro-voids, micro-cracks, or inclusions, easily cause the failure when the glass is exposed to the shock or the thermal variation. In order to produce the highly reliable glass product, the precision inspection of the defect in the glass is required. For this purpose, this paper proposes a machine vision technique based on the auto-focusing method, which searches the defect and measures the location under the fact that the edge image of defect must be the most clear when the focal plane of CCD camera is coincided with the defect. As for the search index, the gradient indicator is presented. The basic principles are verified through the simulations for the computer-generated defect images, where the affects of defect shape, gray level of background, and the brightness of the defect image are also analyzed. Finally, experimental results for actual glass specimens are shown to confirm the applicability of this method to the actual field.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.6 no.2
• /
• pp.105-111
• /
• 2010

Objective : To report eruption of maxillary canine through Bio-$Oss^{(R)}$ graft in patients with secondary bone-grafted alveolar clefts. Methods : Secondary alveolar bone grafts placed in the cleft alveolar defect have been shown to support dental eruption through the graft and may further affect the prevalence of impacted teeth. As the case may be, it could be difficult to do secondary alveolar bone graft with autologous bone. In particular, few reports have been shown the secondary bone graft with heterogenous bone(Bio-$Oss^{(R)}$). In this report, the eruption of canine into bone-grafted alveolar clefts was recorded as panoramic, occlusal radiographs, in 3 patients grafted with Bio-$Oss^{(R)}$ Results : Like autologous bone graft, the canine was erupted and developed into the cleft alveolar defect through Bio-$Oss^{(R)}$ graft. Conclusion : In some cases that autologous bone graft is not available, we can consider heterogenous bone graft into the cleft alveolar defect for dental development and eruption of impacted teeth.