• Korean Journal of Remote Sensing
• /
• v.25 no.3
• /
• pp.271-285
• /
• 2009

Multi-temporal satellite imagery can be changed into a transform image that emphasizes the changed area only through the application of various change detection techniques. From the transform image, an automated change detection model calculates the optimal threshold value for classifying the changed and unchanged areas. However, the model can cause undesirable results when the histogram of the transform image is unbalanced. This is because the model uses a single threshold value in which the sign is either positive or negative and its value is constant (e.g. -1, 1), regardless of the imbalance between changed pixels. This paper proposes an advanced method that can improve accuracy by applying separate threshold values according to the increased or decreased range of the changed pixels. It applies multiple threshold values based on the cumulative producer's and user's accuracies in the automated binary change detection model, and the analyst can automatically extract more accurate optimal threshold values. Multi-temporal IKONOS satellite imagery for the Daejeon area was used to test the proposed method. A total of 16 transformation results were applied to the two study sites, and optimal threshold values were determined using accuracy assessment curves. The experiment showed that the accuracy of most transform images is improved by applying multiple threshold values. The proposed method is expected to be used in various study fields, such as detection of illegal urban building, detection of the damaged area in a disaster, etc.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.65-68
• /
• 2005

In this paper, an algorithm to extract bar-space area is suggested. In a section of bar-code space area the threshold value is computed, and bar and space are extracted according to threshold value. PDF417 is used everyday life and printed in many different materials. The printed PDF417 is especially influenced by various light source. The decision of bar and space is very hard under the change of illumination. The fixed threshold value to distinguish the bar and space can not be applied. in these cases, The proposed algorithm is developed to investigate variable threshold. The variable threshold can be obtained by simple calculation.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.4
• /
• pp.51-58
• /
• 1985

A simple model for the impurity profile in an ion-implanted channel layer of an enhance-ment type IGFET is assumed and a simple expression for the threshold voltage is derived by the assumed impurity profile. In application, the concept of correction factor K is used and the value of threshold voltage is well agreed with experimental value. Also, 1-V character-istics curve is well agreed with experimental value. In addition, this program is packaged and is utilized.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1235-1238
• /
• 2004

Thresholding has been used to reduce the number of gray values in images. Typically, a single threshold value has been used, resulting in two gray level images. Image reduction of one single threshold value, however, may lose too much of the high-frequency edge information. Thus, dynamic thresholding that uses a different threshold for each pixel is preferred instead of using a single threshold value. Dynamic thresholding can preserve high frequency details as well as reduce the size of images. Since it takes long time to perform existing software dynamic thresholding in an embedded system, this paper proposes and implements a circuit by using a FPGA in order to perform a real-time dynamic thresholding,. The proposed circuit consists of two counters, and threshold look-up table, and control unit. The values of two counters determine each pixel position, the threshold look-up table converts each pixel value into other value, and the control unit generates necessary control signals. On arriving from a camera to the proposed circuit, each pixel is compared with its threshold value and is converted into other gray value. An image processing system by using the proposed circuit will be implemented and some experiments will be performed.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.159-162
• /
• 1998

Land cover and land use classification on a huge scale, e.g. national or continental scale, has become more and more important because environmental researches need land cover: And land use data on such scales. We developed a crop field extraction method, which is one of the steps in our land cover classification system for a huge area. Firstly, a crop field model is defined to characterize "crop field" in terms of NDVI value and textual information Textual information is represented by the density of straight lines which are extracted by wavelet transform. Secondly, candidates of NDVI threshold value are determined by "scale-space filtering" method. The most appropriate threshold value among the candidates is determined by evaluating the line density of the area extracted by the threshold value. Finally, the crop field is extracted by applying level slicing to Landsat TM image with the threshold value determined above. The experiment demonstrates that the extracted area by this method coincides very well with the one extracted by visual interpretation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.801-804
• /
• 2004

It should be noted that the critical chloride threshold level is not considered to be a unique value for all conditions. This value is dependent on concrete mixture proportions, cement type and constituents, presence of admixtures, environmental factors, steel reinforcement surface conditions, and other factors. In this study, the accelerated corrosion test for reinforcing steel was conducted by electrochemical and sea water-circulated method, respectively and during the test, corrosion monitoring by half cell potential method was carried out to estimate the critical chloride threshold value when corrosion for reinforcing steel in concrete was perceived. For this purpose, lollypop and beam test specimens were made for $31.4\%,\;41.5\%\;and\;49.7\%$ of w/c. respectively and then the accelerated corrosion test for reinforcing steel was executed. It was observed from the test that the time to initiation of corrosion was found to be different with water-cement ratio and the critical chloride threshold value was found to range from 0.91 to $1.27kg/m^3$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1797-1805
• /
• 1993

An algorithm for the threshold decision from the maximum mismatching correlation value in a direct-sequence spread-spectrum system is presented. This algorithm is named the TDMMC(Threshold Decision from the Maximum Mismatching Correlation value). The purpose of the algorithm is to set the decision threshold in the system which will provide large probability of signal detection. Using this algorithm, the proper setting of the threshold for various SNRs is possible. An additional block called the Threshold Block is used to improve the system performance. The result from the computer simmulation has shown that appling the TDMMC to the noncoherent DS/SS-CSK system can achieve performance improvement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4A
• /
• pp.356-363
• /
• 2002

Video scene segmentation is fundamental role for content based video analysis and many kinds of scene segmentation schemes have been proposed in previous researches. However, there is a problem, which is to find optimal threshold value according to various kinds of movies and its content because only fixed single threshold value usually used for cut detection. In this paper, we proposed the variable dynamic threshold method, which change the threshold value by a probability distribution of cut detection interval and information of frame feature differences and cut detection interval in previous cut detection is used to determine the next cut detection. For this, we present a cut detection algorithm and a parameter generation method to change the threshold value in runtime. We also show the proposed method, which can minimize fault alarm rate than the existing methods efficiently by experimental results.

• The Journal of the Korea Contents Association
• /
• v.4 no.3
• /
• pp.91-97
• /
• 2004

Difference image scheme is widely used for motion estimation in moving object tracking system. This scheme contains a binarization step which segments image into background and moving object regions, referring to threshold value. In this paper, we propose a decision algorithm of tracking the threshold value with a differential image. The key idea is analyzing the histogram of the differential image. In addition we evaluate the performance of this method in comparison with conventional scheme. As an experimental result with 60 images, it is found that threshold by the proposed algorithm is very close to optimal threshold selected manually.

• Journal of Information Processing Systems
• /
• v.16 no.6
• /
• pp.1343-1358
• /
• 2020

In the stagewise arithmetic orthogonal matching pursuit algorithm, the weak threshold used in sparsity estimation is determined via maximum iterations. Different maximum iterations correspond to different thresholds and affect the performance of the algorithm. To solve this problem, we propose an improved variable weak threshold based on the stagewise arithmetic orthogonal matching pursuit algorithm. Our proposed algorithm uses the residual error value to control the weak threshold. When the residual value decreases, the threshold value continuously increases, so that the atoms contained in the atomic set are closer to the real sparsity value, making it possible to improve the reconstruction accuracy. In addition, we improved the generalized Jaccard coefficient in order to replace the inner product method that is used in the stagewise arithmetic orthogonal matching pursuit algorithm. Our proposed algorithm uses the covariance to replace the joint expectation for two variables based on the generalized Jaccard coefficient. The improved generalized Jaccard coefficient can be used to generate a more accurate calculation of the correlation between the measurement matrixes. In addition, the residual is more accurate, which can reduce the possibility of selecting the wrong atoms. We demonstrate using simulations that the proposed algorithm produces a better reconstruction result in the reconstruction of a one-dimensional signal and two-dimensional image signal.