• Title/Summary/Keyword: threshold phenomena

Search Result 107, Processing Time 0.026 seconds

USING SATELLITE SYNTHETIC APERTURE RADAR IMAGERY TO MAP OIL SPILLS IN THE EAST CHINA SEA

  • Shi, Lijian;Ivanov, Andrei Yu.;He, Mingxia;Zhao, Chaofang
    • Proceedings of the KSRS Conference
    • /
    • v.2
    • /
    • pp.981-984
    • /
    • 2006
  • Oil pollution of the ocean is a major environmental problem, especially in its coastal zones. Synthetic aperture radar (SAR) flown on satellites, such as ERS-2 and Envisat, has been proved to be a useful tool in oil spill monitoring due to its wide coverage, day and night, and all-weather capability. The total 120 SAR images containing oil spill over the East China Sea were collected and analyzed, ranging in date from July 23, 2002 to November 11, 2005. After preprocessed, SAR images were segmented by adaptive threshold method. The oil spill images were incorporated into GIS after distinguished from look-like phenomena, finally we presented the oil spills distribution map for the East China Sea. The wide-swath and quick-looks SAR imagery for mapping of oil spill distribution over large marine areas were proved to be useful when full resolution data are not available. After the temporal and spatial distribution of the oil spills were analyzed, we found that most of oil spills were distributed along the main ship routes, which means the illegal discharge by ships, and the occurrence of oil spill detected on SAR images acquired during morning and summer is much higher than during evening and winter.

  • PDF

Lock-on Characteristics of Wake Behind a Rotationally Oscillating Circular Cylinder (주기적으로 회전진동하는 원주 후류의 공진특성에 관한 연구)

  • Lee, Jung-Yeop;Lee, Sang-Joon
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.29 no.8 s.239
    • /
    • pp.895-902
    • /
    • 2005
  • Lock-on characteristics of flow around a circular cylinder oscillating rotationally with a relatively high forcing frequency have been investigated experimentally. Dominant governing parameters are Reynolds number (Re), angular amplitude of oscillation (${\theta}_A$), and frequency ratio $F_R=f_f/f_n,\;where\;f_f$ is a forcing frequency and $f_n$ is a natural frequency of vortex shedding. Experiments were carried out under the conditions of $Re=4.14{\times}10^3,\;{\pi}/90{\leq}{\theta_A}{\leq}{\pi}/3,\;and\;F_R=1.0$. The effect of this active flow control technique on the lock-on flow characteristics of the cylinder wake was evaluated with wake velocity measurements and spectral analysis of hot-wire signals. The rotational oscillation modifies the flow structure of near wake significantly. The lock-on phenomenon always occurs at $F_R=1.0$, regardless of the angular amplitude ${\theta}_A$. In addition, when the angular amplitude is less than a certain value, the lock-on characteristics appear only at $F_R=1.0$,. The range of lock-on phenomena expands and vortex formation length is decreased, as the angular amplitude increases. The rotational oscillation create a small-scale vortex structure in the region just near the cylinder surface. At ${\theta}_A=60^{\circ}$, the drag coefficient was reduced about $43.7\%$ at maximum.

Magnetic Creep in Narrow Channel (좁은 Channel에서의 자기적 Creep)

  • 박영문
    • 전기의세계
    • /
    • v.23 no.2
    • /
    • pp.55-61
    • /
    • 1974
  • Nature of magnetic creep phenomena in low coercive force films(Ni 80%-Fe 20%) in form of narrow channels imbedded in high coercive force films is studied in this work. Aluminium is evaporated on the hot glass substrate and eched free in the shape of narrow channels by photoetoetching method. then, Permalloy(Ni 80%, Fe 20%) is deposited on these Aluminium substrate under the uniform field of 30(Oe) to introduce anisotropy. Permalloy film on Al has a high coercive force and one on the substrate devoid of Al has how coercive force. Magnetic revers domain which is introduced at the end of channel grows under the a.c field in hard axis direction, in spite of very weak d.c field in easy axis direction. This creeping is investigated as a function of external fields and channel widths. Permalloy film thickness is 500.angs.-900.angs. and channel widths are 40, 51, 65, 81, 115.mu. respectively. Creeping increases as external field increases while it decreases with channel width decrease. Creep velocity in channels depends on the a.c field along hard axis, d.c field along easy axis and channel widths and its range is 1-10cm/sec in this experiment. From study of dependence of creep velocity on channel width, it can be concluded that creep velocity is expressed in form of v=v$_{0}$ exp .alpha.(H-H$_{0}$) where .alpha. is a function of a.c field along hard axis and H is driving d.c field along easy axis, H$_{0}$ is not a coercive force of film as usuall expected but the d.c threshold field along easy axis which is a function of channel width. This characteristic is also confirmed by the study of dependence of creep velocity upon easy axis field strength. Value of .alpha. obtained is 1.3-2.3cm/sec We depending upon film charactor, hard axis field strength and frequency.uency.

  • PDF

Effective Nonlinear Filters with Visual Perception Characteristics for Extracting Sketch Features (인간시각 인식특성을 지닌 효율적 비선형 스케치 특징추출 필터)

  • Cho, Sung-Mok;Cho, Ok-Lae
    • Journal of the Korea Society of Computer and Information
    • /
    • v.11 no.1 s.39
    • /
    • pp.139-145
    • /
    • 2006
  • Feature extraction technique in digital images has many applications such as robot vision, medical diagnostic system, and motion video transmission, etc. There are several methods for extracting features in digital images for example nonlinear gradient, nonlinear laplacian, and entropy convolutional filter. However, conventional convolutional filters are usually not efficient to extract features in an image because image feature formation in eyes is more sensitive to dark regions than to bright regions. A few nonlinear filters using difference between arithmetic mean and harmonic mean in a window for extracting sketch features are described in this paper They have some advantages, for example simple computation, dependence on local intensities and less sensitive to small intensity changes in very dark regions. Experimental results demonstrate more successful features extraction than other conventional filters over a wide variety of intensity variations.

  • PDF

Limitation of Light Energy Utilization in the Fallen Stems of Opunttia bigelovii without CO2 and Water Absorption (지상에 떨어진 Opunttia bigelovii 선인장의 줄기에 있어서 광에너지의 이용한계)

  • Chang, Nam-Kee
    • The Korean Journal of Ecology
    • /
    • v.3 no.1_2
    • /
    • pp.31-39
    • /
    • 1980
  • Light energy utilization was investigated in the fallen stems of Opuntia bigelovii. Threshold time for the decreasing steady state of acid accumulation in the palisade tissue of Opuntia stems was 4 hours under 1,000 $\mu Em^{-2}sec^{-1}$ of PAR at $75^{\circ}C$, while stomatal closing throughout the stem stage was illustrated by 256.0-310.4 sec $\textrm{cm}^{-1}$ of stem diffusive resistance and 0.20g $day^{-1}$ of the water loss rate as cuticular resistance. The acid loss rate in the stems per 4 hours was related to tissue water contents and a few acid loss rate could be recognized at the water content rage of 56.4%~46.8%. Endogenous oscillation of tissue acidity due to the diurnal rhythmic phenomena depended on the tissue water content was found in the Opuntia stems with stomatal closing during the normal day/night cycle. The survival rate of 1 segment to survive 2 years old cactus was 22.7% in desert environments. Such a compensation photosynthesis which utilizes light energy and maintains the reassimilation of endogenous gases was interpreted as conceptual model.

  • PDF

Pilot Study on the Statistical Characteristics of a Railroad Weather-Related Accidents and Incidents in Korea (철도기상사고의 통계적 특성)

  • Park, Jong-Kil;Jung, Woo-Sik;Lee, Man-Ki;Kim, Hi-Man;Lee, Jae-Su
    • Journal of Environmental Science International
    • /
    • v.19 no.7
    • /
    • pp.917-929
    • /
    • 2010
  • This paper aims to find out the statistical characteristics of the weather related railroad accidents and incidents. Data from Korea Railroad Operation Information System(KROIS) and Korea Railroad Accidents reports during 1996-2008 were used to investigate the occurrence frequency of railroad accidents and operation obstacles and their association with weather phenomena. The results are as follows; The occurrence frequency of railroad accidents and operation obstacles decrease gradually, and most of railroad accidents is a railroad traffic accidents. The amount of damages by a railroad weather-related accidents is higher than those of the railroad accidents and operation obstacles. It was also found that weather events influencing the railroad weather-related accidents and incidents are rainfall, snowfall, lightning, winds. And they caused a railroad weather-related accidents and incidents, such as railway obstruction, signal failure, and power supply failure. Therefore we need research about threshold review and a quantitative and qualitative analysis of a railroad weather-related accidents and incidents according to climate change.

Negative Resistance Characteristics of $Fe_{1+x}V_{2-x}O_4$ Spinels ($Fe_{1+x}V_{2-x}O_4$ Spinel의 부성저항특성)

  • Lee, Gil-Sik;Son, Byeong-Gi;Lee, Jong-Deok
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.14 no.3
    • /
    • pp.25-31
    • /
    • 1977
  • Fe V spinels were prepared by sintering the well-ground stoichiometric mixtures of Fe O and V O at 1,10$0^{\circ}C$ under H -CO atmosphere. The activation energy for electrical conduction decreases with increasing amount of iron. The tendency of activation energy depending on the amount of iron contained clarifies that the electrical condction of the spinel is mainly due to electron hopping between Fe and Fe ions at B sites. In the experiment for negative resistance characteristics, the threshold voltage (Vth) for the samples is related to ambient temperature, thickness and raising rate of applied voltage. Vth decreases as temperature increases while Vth increases linearly with thickness and Vth increases linearly with the raising rate of applied voltage in semi-logarithmic scale. These results lead to a conclusion that current paths mainly formed by thermal breakdown are ascribed to the negative resistance phenomena. Applying this property, these vanadium iron spinels may be used for switching elements.

  • PDF

Optical emission analysis of hybrid air-water discharges

  • Pavel, Kostyuk;Park, J.Y.;Han, S.B.;Koh, H.S.;Gou, B.K.;Lee, H.W.
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2006.06a
    • /
    • pp.521-522
    • /
    • 2006
  • In this paper, hybrid air-water discharges were used to develop an optimal condition for providing a high level of water decomposition for hydrogen yield. Electrical and optical phenomena accompanying the discharges were investigated along with feeding gases, flow rates, and point-to-plane electrode gap distance. The primary focus of this experiment was put on the optical emission of the near UV range, with the energy threshold sufficient for water dissociation and excitation. The $OH(A^{2+},'=0\;X^2,"=0$) band's optical emission intensity indicated the presence of plasma chemical reactions involving hydrogen formation. In the gaseous atmosphere saturated with water vapor the OH(A-X) band intensity was relatively high compared to the liquid and transient phases although the optical emission strongly depended on the flow rate and type of feeding gas. In the gaseous phase discharge phenomenon for Ar carrier gas transformed into a gliding arc via the flow rate growth. OH(A-X) band's intensity increased according to the flow rate or residence time of He feeding gas. Reciprocal tendency was acquired for $N_2$ and Ar carrier gases. The peak value of OH(A-X) intensity was observed in the proximity of the water surface, however in the cases of Ar and $N_2$ with 0.5 SLM flow rate peaks shifted to the region below the water surface. Rotational temperature ($T_{rot}$) was estimated to be in the range of 900-3600 K, according to the carrier gas and flow rate, which corresponds to the arc-like-streamer discharge.

  • PDF

Development of Cloud Detection Method Considering Radiometric Characteristics of Satellite Imagery (위성영상의 방사적 특성을 고려한 구름 탐지 방법 개발)

  • Won-Woo Seo;Hongki Kang;Wansang Yoon;Pyung-Chae Lim;Sooahm Rhee;Taejung Kim
    • Korean Journal of Remote Sensing
    • /
    • v.39 no.6_1
    • /
    • pp.1211-1224
    • /
    • 2023
  • Clouds cause many difficult problems in observing land surface phenomena using optical satellites, such as national land observation, disaster response, and change detection. In addition, the presence of clouds affects not only the image processing stage but also the final data quality, so it is necessary to identify and remove them. Therefore, in this study, we developed a new cloud detection technique that automatically performs a series of processes to search and extract the pixels closest to the spectral pattern of clouds in satellite images, select the optimal threshold, and produce a cloud mask based on the threshold. The cloud detection technique largely consists of three steps. In the first step, the process of converting the Digital Number (DN) unit image into top-of-atmosphere reflectance units was performed. In the second step, preprocessing such as Hue-Value-Saturation (HSV) transformation, triangle thresholding, and maximum likelihood classification was applied using the top of the atmosphere reflectance image, and the threshold for generating the initial cloud mask was determined for each image. In the third post-processing step, the noise included in the initial cloud mask created was removed and the cloud boundaries and interior were improved. As experimental data for cloud detection, CAS500-1 L2G images acquired in the Korean Peninsula from April to November, which show the diversity of spatial and seasonal distribution of clouds, were used. To verify the performance of the proposed method, the results generated by a simple thresholding method were compared. As a result of the experiment, compared to the existing method, the proposed method was able to detect clouds more accurately by considering the radiometric characteristics of each image through the preprocessing process. In addition, the results showed that the influence of bright objects (panel roofs, concrete roads, sand, etc.) other than cloud objects was minimized. The proposed method showed more than 30% improved results(F1-score) compared to the existing method but showed limitations in certain images containing snow.

Fabrication and Characterization of Hybrid NTC Thermistor Films with Conducting Oxide Particles by an Aerosol-Deposition Process (상온 분사 공정에 의한 산화물전도 입자 복합 하이브리드 NTC 서미스터 필름의 제작 및 특성)

  • Kang, Ju-Eun;Ryu, Jungho;Choi, Jong-Jin;Yoon, Woon-Ha;Kim, Jong-Woo;Ahn, Cheol-Woo;Choi, Joon Hwan;Park, Dong-Soo;Kim, Yang-Do
    • Journal of the Korean Ceramic Society
    • /
    • v.50 no.1
    • /
    • pp.63-69
    • /
    • 2013
  • Negative-temperature coefficient (NTC) thermistors based on nickel manganite spinel ($NiMn_2O_4$) are widely used for many applications, such as sensors and temperature compensators, due to their good thermistor characteristics and stabilities. However, to achieve thermistors with a high NTC B constant, which is an important figure of merit pertaining to the degree of temperature sensitivity, the activation energy should be high such that high resistivity at ambient temperatures results. To obtain a high B constant and low resistivity, Al and Si modified spinel structured $Ni_{0.6}Si_{0.2}Al_{0.6}Mn_{1.6}O_4$ hybrid thick films with the conducting metal oxide of $LaNiO_3$ were fabricated on a glass substrate by aerosol deposition at room temperature (RT). The NTC-$LaNiO_3$ hybrid thick films showed resistivity as low as < $100k{\Omega}\;cm$ at $90^{\circ}C$, which is one or two orders of magnitude lower than that of the monolithic NTC films, while retaining a high B constant of $NiMn_2O_4$ of over 5500 K when 20 wt% $LaNiO_3$ was added without a post-thermal treatment. These phenomena are explained by the percolation threshold mechanism.