• Journal of Korea Multimedia Society
• /
• v.24 no.10
• /
• pp.1336-1345
• /
• 2021

Attention Deficit Hyperactivity Disorder (ADHD) is one of the most common neurological disorders in children. The diagnosis of ADHD in children is based on the interviews and observation reports of parents or teachers who have stayed with them. Since this approach cannot avoid long observation time and the bias of observers, another approach based on Electroencephalography(EEG) is emerging. The goal of this study is to develop an assistive tool for diagnosing ADHD by EEG classification. This study explores the frequency bands of EEG and extracts the implied features in them by using the proposed CNN. The CNN architecture has three Convolution-MaxPooling blocks and two fully connected layers. As a result of the experiment, the 30-60 Hz gamma band showed dominant characteristics in identifying EEG, and when other frequency bands were added to the gamma band, the EEG classification performance was improved. They also show that the proposed CNN is effective in detecting ADHD in children.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.673-678
• /
• 2015

Terahertz dual-band frequency selective surface filters made by perforating two different rectangular holes in molybdenum have been designed, fabricated and measured. Physical mechanisms of the dual-band resonant responses are clarified by three differently configured filters and the electric field distribution diagrams. The design process is straightforward and simple according to the physical concept and some formulas. Due to the weak coupling between the two neighboring rectangle holes with different sizes in the unit cell, good dual-band frequency selectivity performance can be easily achieved both in the lower and higher bands by tuning dimensions of the two rectangular holes. Three samples are fabricated, and their dual-band characteristics have been demonstrated by a THz time-domain spectroscopy system. Different from most commonly used metal-dielectric structure or metal-dielectric-metal sandwiched filters, the designed dual-band filters have advantages of easy fabrication and low cost, the encouraging results afforded by these filters could find their applications in dual-band sensors, THz communication systems and other emerging THz technologies.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.3
• /
• pp.137-143
• /
• 1988

We have investigated the infrared spectra for carbon monoxide chemisorbed on silica supported ruthenium with and without potassium coating within the frequency range of 1800-2200 $cm^{-1}$ at various ruthenium concentrations and CO pressures. For the system without potassium coating, three bands were observed in the infrared spectra when CO was adsorbed on both the reduced and oxidized form of supported ruthenium. However, the relative intensities of these three bands were found to have no interdependence. Therefore, we have assigned each of these bands as arising from the CO stretching vibration for carbon monoxide molecules adsorbed on the Ru sites of different nature. On coating with potassium, the 2030 $cm^{-1}$ band observed for the system without potassium coating was found to suffer red shift by 10-30 $cm^{-1}$ and we conclude that this bathochromic shift is caused by enhancement in the capability of back donation of electrons from the metal atom to the antibonding ${\pi}{\ast}$ orbitals of CO due to the presence of potassium.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2000.11a
• /
• pp.231-234
• /
• 2000

The corona in oil, the surface discharge in oil, the void discharge which could be in a transformer were imitated by using three electrodes with different shapes and the frequency bands of each ultrasonic signal were measured. After emitting artificial noises toward the transformer, only ultrasonic signals were extracted by frequency filtering, from the ultrasonic signals with noises at partial discharge. As a result, it was confirmed that the ultrasonic signals due to the corona in oil, the surface discharge in oil, the void discharge could be distinguished from the noises.

• Journal of electromagnetic engineering and science
• /
• v.18 no.2
• /
• pp.78-87
• /
• 2018

This paper describes specular reflectance measurements of dielectric plates in three waveguide frequency bands: D-band (110-170 GHz), G-band (140-220 GHz), and J-band (220-325 GHz). The transmit (Tx) part of the proposed specular reflectance measurement system is stationary, while the receive (Rx) part and the material under test (MUT) holder are concentric-rotating with a 2:1 speed ratio for specular reflectance measurements. In specular reflectance measurements, the first step measures the specular reflection coefficients of an MUT and a metal plate on the MUT holder located at the center of the Tx and Rx parts, and the second step calculates the specular reflectance defined by the specular reflection power (i.e., intensity) of the MUT normalized to that of the metal plate. Multiple reflection effects between the Tx and Rx antennas and the MUT on the measured specular reflectance are minimized by averaging out the multiple specular reflectances measured with changing the separation distance between the two antennas by ${\lambda}/8$ intervals. Measurement results of the perpendicular-polarized specular reflectance of commonly used dielectric plates are verified by comparing those with the analytic results and show that the results measured over the overlapped frequency range of the D-/G-bands and at the boundary frequency of the G-/J-bands agree well with the results for the other band, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11A
• /
• pp.891-897
• /
• 2009

In the satellite communications, the frequency sharing with other services is important because the service coverage is generally very wide and overlaps with those of other wireless services. This paper introduces a new technique to mitigate interference into the terrestrial stations from the Earth station in the same frequency band by means of band segmentations which are portions of the overall operation frequency band divided by frequency reuse factor. We consider a multi-beam satellite system, where frequency bands are reused in each satellite cell. The terrestrial stations use band segmentations of adjacent satellite cells, and this may decrease the interferences. By this way, the terrestrial and satellite systems can share the same frequency bands efficiently. The simulation is performed at frequency reuse factors, seven and three. The simulation results show that the proposed method can highly reduce the interference level to -168 dBW or -163 dBW depending on the considered frequency reuse factor from -117 dBW at the 90% link availability.

• Journal of Internet Computing and Services
• /
• v.18 no.3
• /
• pp.11-17
• /
• 2017

To the elderly, sudden falls are one of the most frightening accidents. If an accident occurs, a prompt action has to be taken to deal with the situation. Recently, there have been a number of attempts to detect sudden falls using acceleration sensors embedded in the mobile devices, such as smart phones and wrist-bands. However, using the sensor readings only, the detection rate of the falls is around 65%. Ordinary daily activities such as running or jumping could not be well distinguished from the falls. In this paper, we describe our attempts on improving the fall-detection rate. We implemented a wrist-band fall detection module, using a three-axis acceleration sensor. With the pattern matching on the fall signal-strength frequency spectrum, in addition to the conventional signal strength measurement, we could improve the detection rate by 9% point. Furthermore, by applying two wrist-bands in the experiment, we could further improve the detection rate to 82%.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1611-1618
• /
• 2017

This paper presents a compact reconfigurable printed monopole antenna, operating in three different frequency bands (2.45 GHz, 3 GHz and 5.2 GHz), depending upon the state of the lumped element switch. The proposed multiband reconfigurable antenna is designed and fabricated on a 1.6 mm thicker FR-4 substrate having a relative permittivity of 4.4. When the switch is turned ON, the antenna operates in a dual band frequency mode, i.e. WiFi at 2.45 GHz (2.06-3.14 GHz) and WLAN at 5.4 GHz (5.11-5.66 GHz). When the switch is turned OFF, it operates only at 3 GHz (2.44-3.66 GHz). The antenna radiates omni-directionally in these bands with an adequate, bandwidth (>10 %), efficiency (>90 %), gain (>1.2 dB), directivity (>1.7 dBi) and VSWR (<2). The fabricated antenna is tested in the laboratory to validate the simulated results. The antenna, due to its reasonably compact size ($39{\times}37mm^2$), can be used in portable devices such as laptops and iPads.

• ETRI Journal
• /
• v.31 no.3
• /
• pp.271-281
• /
• 2009

This paper presents a novel multiband microstrip-fed right angle slot antenna design technique for multiple independent frequency bands. The new technique uses various slot sizes at various appropriate positions. We first propose a tri-band slot antenna consisting of three right angle slots. Then, a quad-band slot antenna is developed with four right angle slots which achieves slant ${\pm}45^{\circ}$ linear polarization, omnidirectional pattern coverage, good antenna gain, and acceptable impedance bandwidths over all the operating frequency range. Moreover, an open-circuited tuning stub is introduced to achieve good impedance matching. Both proposed antennas are designed on a ground plane of RT/duroid 5880 substrate with a thickness of 1.575 mm. The real measurable results show that the desired frequencies used in wireless communication systems, namely, WLAN and WiMax, are efficiently achieved.

• Macromolecular Research
• /
• v.15 no.5
• /
• pp.396-402
• /
• 2007

The dielectric properties and various pattern-forming states of dual-frequency material in a nematic phase, as well as its mixture containing low concentrations of reactive monomers, are reported. The dielectric relaxation behaviors of nematic MLC 2048 are presented and compared to its mixture containing both mesogenic and nonmesogenic reactive monomers. The sign-inversion frequency of the dielectric anisotropy was significantly shifted on the addition of small amounts of the reactive monomers. However, all three mixtures used in this study essentially exhibited the same field-induced instabilities at different frequencies and voltage domains of the applied electric field. A broad band of modulated states were found to exist above a critical voltage and within a voltage dependent frequency band in the vicinity of the sign-inversion frequency, $f_I$, of the dielectric anisotropy. As the $f_I$ of the mixtures shifted, so did the bands of the modulated state of the different mixtures and the temperatures, which were well matched with the measured $f_I$ value.