• The Journal of Korean Medicine
• /
• v.29 no.5
• /
• pp.104-110
• /
• 2008

Objectives : The purpose of this study is to develop the method of selecting representative pulse wave. Methods : The pulse waves were acquired at the right and the left Guan point(關部) with 1420 people who were apparently healthy. The shape agreement of right and left pulse wave and the floating-sinking ratio were compared with three cases, which were the pulse height based method, the pulse area based method, and the pulse time based method. Results : In the point of the shape accordance, the pulse time based method was the best, and the pulse area based method was the worst. In the point of the floating-sinking ratio, the pulse height based method was the worst, and the pulse time based method was the best. Conclusions : So, the pulse time based method was recommended for selecting the representative pulse wave. This study compared the selection methods of representative pulse using the physiological characteristics of pulse wave. Further studies are required, because the representative pulse wave is the main factor of determining the shape and the floating-sinking characteristic of the pulse wave.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.3
• /
• pp.220-224
• /
• 2017

In this paper, a method of feeding for the near field beam scanning array antenna with three dimensional focal point has been studied. The conventional array antenna theory is mostly about the far field points. The basic idea is to feed the transmitted signal so that it is in phase at the desired point. In this study, a method is proposed to compensate the phase to have the maximum received power at the point where the measurement point distance is near to the array antenna size. In the proposed method, 11 point source antennas are arrayed in three ways in free space. And the contour map is plotted by calculating the radiation patterns in the three dimensional space and the received signal intensities in the plane within the near space. As a result, it was confirmed that 3 dimensional beam scanning is possible also in the near field of the array antenna.

• Journal of the Optical Society of Korea
• /
• v.18 no.5
• /
• pp.523-530
• /
• 2014

Machine material and structural strain are critical factors for appraising mechanical properties and safety. Particularly in three and four-point bending tests, which appraise the deflection and flexural strain of an object due to external force, measurements are made by the crosshead movement or deflection meter of a universal testing machine. The Digital Image Correlation (DIC) method is one of the non-contact measurement methods. It uses the image analyzing method that compares the reference image with the deformed image for measuring the displacement and strain of the objects caused by external force. Accordingly, the advantage of this method is that the object's surface roughness, shape, and temperature have little influence. However, its disadvantage is that it requires extensive time to compare the reference image with the deformed image for measuring the displacement and strain. In this study, an algorithm is developed for DIC that can improve the speed of image analysis for measuring the deflection and strain of an object caused by a three-point bending load. To implement this algorithm for improving the speed of image analysis, LabVIEW 2010 was used. Furthermore, to evaluate the accuracy of the developed fast correlation algorithm, the deflection of an aluminum specimen under a three-point bending load was measured by using the universal test machine and DIC measurement system.

• Journal of Korea Multimedia Society
• /
• v.12 no.6
• /
• pp.804-814
• /
• 2009

In this paper, a novel system for avatar motion controlling by tracking face is presented. The system is composed of three main parts: firstly, LCS (Local Cluster Searching) method based face feature detection algorithm, secondly, HMM based feature points recognition algorithm, and finally, avatar controlling and animation generation algorithm. In LCS method, face region can be divided into many small piece regions in horizontal and vertical direction. Then the method will judge each cross point that if it is an object point, edge point or the background point. The HMM method will distinguish the mouth, eyes, nose etc. from these feature points. Based on the detected facial feature points, the 3D avatar is controlled by two ways: avatar orientation and animation, the avatar orientation controlling information can be acquired by analyzing facial geometric information; avatar animation can be generated from the face feature points smoothly. And finally for evaluating performance of the developed system, we implement the system on Window XP OS, the results show that the system can have an excellent performance.

• Journal of Sensor Science and Technology
• /
• v.33 no.4
• /
• pp.187-195
• /
• 2024

Light detection and ranging (LiDAR), a widely used sensor in mobile robots and autonomous vehicles, has its most important function as measuring the range of objects in three-dimensional space and generating point clouds. These point clouds consist of the coordinates of each reflection point and can be used for various tasks, such as obstacle detection and environment recognition. However, several processing steps are required, such as three-dimensional modeling, mesh generation, and rendering. Efficient data processing is crucial because LiDAR provides a large number of real-time measurements with high sampling frequencies. Despite the rapid development of controller computational power, simplifying the computational algorithm is still necessary. This paper presents a method for estimating the presence of curbs, humps, and ground tilt using range measurements from a single horizontal or vertical scan instead of point clouds. These features can be obtained by data segmentation based on linearization. The effectiveness of the proposed algorithm was verified by experiments in various environments.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.2
• /
• pp.47-56
• /
• 1991

The specifications needed for the mobile cranes are summarized as the following : 1) there may be not occured the oscillation of the cargo at unloading point. 2)the required time from departure point to destination point may be as short as possible. 3) there may be not a collapse of cargo caused by the oscillation in the course that the crago is mobilling. In this paper, the linear fractional transformation method is adopted as a method in order to improve the above mentioned problems. A design method of servo system is developed by modifying Davison's method for the case that the homogeneous differential equations of reference input and disturbance are different types. The real time control of a mobile crane system is implemented by 16bits microcomputer with A/D and D/A converters to illustrate the application of the adopted method. The experimental results for the three types of the design methods; linear fractional transformation method, servo system design method and optimal control method are shown for the comparison.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.3
• /
• pp.169-176
• /
• 2020

This study suggested a method to increase the quality of chest compressions in patients with cardiac arrest during transport. When providing cardiopulmonary resuscitation to a cardiac arrest patient in the pre-hospital phase, the quality of chest compressions should be improved by using a three-point fixed belt to the ambulance. Because the quality of the chest compression was increased when the 119 paramedic wears a 3-point fixed belt in addition to the chest compression method. Also, paramedics are less likely to be at risk. Therefore, if a 3-point fixed belt is worn in an ambulance during transport, 119 paramedics will be able to secure safety and provide high-quality chest compressions to cardiac arrest patients.

• BMB Reports
• /
• v.29 no.5
• /
• pp.442-447
• /
• 1996

Mutations in codon 12, 13 and 61 of one of the three ras genes, H-ras, K-ras and N-ras, convert these genes into active oncogenes. The presence of H-ras gene mutations have important prognostic implications in various cancers. In this study, the H-ras gene mutations were investigated by two-step PCRRFLP in patients with bladder and stomach cancer. For the control experiments, T24 and SK2 cell lines were used. In a total of 36 bladder cancer patient cases, five (13.9%) mutations were found by this method. Of these, point 12 mutations were two (5.6%) cases and point 61 mutations were three (8.3%) cases. On the other hand, H-ras mutation was not found in 29 cases of stomach cancer. The results of the mutated H-ras gene confirmed by direct sequencing analysis were correlated well with PCR analysis. From the sensitivity test, the H-ras mutation was found to have about 0.2% of mutated DNA mingled in normal DNA. In conclusion, the H-ras mutation has a higher clinical Significance in bladder cancer than stomach cancer. Moreover the two-step PCR-RFLP method is sensitive, rapid and relatively simple for clinical work in detecting H-ras point mutations.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.2
• /
• pp.268-275
• /
• 2015

This paper proposes a method of switching to improve power loss for the single-phase three-level NPC inverter. The conventional switching methods, which are called as the bipolar and unipolar switching methods, are used for single phase inverters using three-level topology. However, these switching method have disadvantage in the power loss. Because all of the switch are operated. To reduce the power loss of the three-level NPC inverter, clamp switching method is introduced in this paper. This way, one of the lag is fixed that switching loss is reduced. This paper analyzes and compares power losses of unipolar method and clamp method. The validity of the power loss analysis is verified through the simulation and experimental results.

• The Journal of the Korea Contents Association
• /
• v.18 no.2
• /
• pp.231-239
• /
• 2018

In this paper, we propose a vanishing point detection method using multiple initial vanishing points. Vanishing points are important geometric information that is used for reconstructing 3D structures. Three vanishing points are detected for indoor scenes. In the previous work, it could be inaccurate to detect only one initial vanishing point, because initial vanishing point getting most highest sum of voting could be deferent from the best initial vanishing point. Therefore the method which sets multiple initial vanishing point and detects a best vanishing point from them gives us preparation for the prior case. Also in this paper, we propose a adjusting vanishing point method by postprocessing of detected vanishing points. We could detect more accurate vanishing point by using postprocessing. Experimental results show that the accuracy of the vanishing point detection is about 1~2% higher than that of the existing method through the proposed method and the performance is improved accordingly.