• Journal of Dental Anesthesia and Pain Medicine
• /
• v.20 no.4
• /
• pp.241-250
• /
• 2020

Background: Placement of full-coverage restorations such as stainless steel crowns (SSCs) for pulpectomy treated primary molars is essential for successful outcomes. The tooth preparation process for SSCs can cause discomfort to gingival tissues since the crown should be seated 1 mm subgingivally. The purpose of this prospective trial was to compare the effectiveness of subgingival and transmucosal application of topical anesthetics on dental pain during SSC tooth preparation among 6- to 8-year-old children. Methods: A consecutive sample of 27 children, aged 6-8 years, who required an SSC after pulp therapy in primary molars were randomly divided into three groups. Group A received infiltration anesthesia before tooth preparation for SSC placement, whereas in Group B and C, only topical anesthesia was applied subgingivally and transmucosally. Wong-Bakers Faces pain rating scale (WBFPS) scores were recorded after tooth preparation. Faces, Legs, Activity, Cry and Consolability (FLACC) scores were evaluated by two blinded and calibrated investigators through video recordings of the patient during tooth preparation. Data were tabulated, and inter-group comparisons were performed using the Kruskal-Wallis and analysis of variance tests. Results: Out of the 27 participants, 48% were boys and 52% were girls, with an overall mean age of 6.83 years. Group A showed the least pain scores according to both the scales, followed by Group B and Group C. The pain intensity was statistically significant on both the pain scales with P = 0.003 for FLACC and P < 0.001 for WBFPS. Conclusion: Subgingival application of topical anesthesia reduced pain to a certain extent but not as effectively as infiltration anesthesia during SSC tooth preparation in primary molars. Transmucosal application of topical anesthesia did not reduce discomfort when compared to the other two interventions.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.2
• /
• pp.106-110
• /
• 2017

This paper compared current limiting characteristics of superconducting fault current limiter (SFCL) using E-I core due to the location of windings. Since E-I core has three legs and two magnetic paths, the current limiting characteristics of SFCL were expected to be affected by the installation location of windings, either center leg or right/left leg. To analyze its characteristics, the electrical equivalent circuit of the SFCL were derived and the electromagnetic analysis for the SFCL with the designed structure were performed. From the short-circuit tests, the hysteresis curve and the voltage-current trajectory of the SFCL due to the installation location of windings were extracted and compared each other. The SFCL with windings in the center leg of E-I core was shown to be larger magnetizing inductance compared to the one with windings in the right or left leg of E-I, which was analyzed from the hysteresis curve. In addition, larger decreased fault current right after the fault occurrence in the SFCL with windings in the center leg of E-I core was confirmed than the SFCL with windings in the right or left leg of E-I.

• Korean journal of applied entomology
• /
• v.42 no.1
• /
• pp.9-13
• /
• 2003

Cuticular hydrocarbons of antenna, legs and wings from two species of honeybee worker of Apis mellifera L. and Apis cerana F. can be analyzed directly with gas chromatograph and GC/MS without solvent extraction. The saturated hydrocarbons identified in selected part of both species were nC22, nC23, nC25-nC3O, nC32 and nC34 except nC24. Two saturated hydrocarbons, nC26 (23.0-42.6%) and nC28 (16.8-54.8%), were major compounds in both species and others were minor compounds. A. mellifera can be distinguished from A. cerana F. by having higher proportion of nC30, nC32 and nC34 by having lower proportion of nC25 from three selected part of both species.

• Ocean and Polar Research
• /
• v.35 no.4
• /
• pp.323-349
• /
• 2013

The mud shrimp Upogebia major (Upogebiidae: Decapoda: Crustacea) is a common species on muddy and sandy mud tidal flats in the west coast of Korea. They reside in Y-shaped burrows that can extend up to more than 2 meters below the sediment surface. They feed on suspended detritus carried into their burrow by the beating of their pleopods and captured by their hairy first two pairs of thoracic legs. Mud shrimp burrows provide a habitat for a variety of small organisms such as crabs, shrimps, polychaetes, and mollusks. Ovigerous females are observed from December to May. Females deposit eggs only once per breeding season. They start hatching in March and the pelagic larvae of first zoea appear in March and April, followed by benthic settlement in May. Growth over the first year is rapid, and females deposit their first eggs in the third breeding season, 31 months after their settlement. Adult shrimps live for 4~5 years. Depth of the burrow increases with body length. The deep burrows provide refuge from predators and physical stress, allowing the shrimps to survive for a long time. The mud shrimps supply oxygen-rich water to their deep burrows, and exert a great influence on the structure and metabolism of the tidal flat benthic community. However, recently this type of mud shrimp has posed a serious threat to the Korean clam industry along the west coast of Korea. The extensive burrowing shrimp populations suddenly invaded the tidal flats from 2010 where the clams (Ruditapes philippinarum) are raised. As a consequence, clam production has decreased by about 10% over the past three years in some Korean clam beds. Therefore, the objective of this study is to review the biology of this mud shrimp in order to seek solutions to control the burrowing of these shrimps.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.5
• /
• pp.393-400
• /
• 2015

This paper describes the development of a chest-wearable robot that can efficiently perform self walking rehabilitation without a helper. The features of the developed robot are divided into three parts. First, as a mechanical characteristic, the conventional elbow crutch is attached at the forearm. However, the proposed robot is attached to the patient's chest, enabling them to feel free to use their hands and eliminate the burden of the arms. Second, as a characteristic of the driving algorithm, pressure sensors attached to the chest automatically perceive the patient's walking intention and move the robot-leg thereafter. Also, for safety, it stops operating when an obstacle is found in front of the patient by using ultrasonic sensors and generates a beeping sound. Finally, by using the scotch yoke mechanism, supporting legs are moved up and down using a rotary servo motor without excessive torque that is generated by large ground reaction forces. We showed that the developed robot can effectively perform self walking rehabilitation through walking experiments, and its performance was verified using Electromyograph (EMG) sensors.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.3
• /
• pp.339-347
• /
• 1994

In this study the physiological significance of the upper and lower body on thermoregulation and sensation are examined. Experiments were carried out on 4 females in a climatic chamber conditioned at $25\pm1^{circ}C, 50\pm5%$ R.H.. Before the measurements, subjects were exposed to 3 types of enviromental temperature: 1) $25\pm1^{\circ}C$ for 60 min.(ST), 2) $25^{\circ}C$\rightarrow35^{circ}C\rightarrow25^{\circ}C$ for about 40 min.(HT), 3) $25^{\circ}C$\rightarrow15^{circ}C\rightarrow25^{\circ}C$ for about 40 min.(LT) covering the upper body (U) or lower body (L) with garments. 1) $T_{re}$ was significantly higher in L than in U only in 57 condition. $T_{sk}$ and Temp. under the clothing were higher in U than in L in all three conditions. Thermal sensation was warmer in U than in L, and comport sensation was most comfortable in HT condition. 2) When the upper or lower body was covered or exposed, the mean skin temperature of the upper body was higher than that of the lower body. Following covering and uncovering the same area, the changes in skin temperature were greater in the upper body than in lower body, and covering the upper body produced a greater difference of skin temperature between body and lower body than covering the lower body. 3) In all environmental conditions, when the upper body was uncovered, the skin temperatures of the chest, upper arms and forearms dropped to a considerable degree, and when the lower body was uncovered, skin temperatures of the legs showed the same pattern. On the other hand, skin temperature of the thinghs showed only little change in all cases except forehead and back uncovered or covered in two clothing types.

• Journal of Korean Public Health Nursing
• /
• v.17 no.1
• /
• pp.96-112
• /
• 2003

The purpose of this study was to determine how often toddlers and preschoolers in kindergartens have accidents and what factors affect the accident rate. The study population consisted of 150 children who were attending at nursery schools and 150 children who were attending at kindergartens. The data was collected from ten nursery schools and five kindergartens from five districts in Daegu. The questionnaires were distributed to teachers of participating nursery schools and kindergartens to be completed using nursing care records in the institutions and by interviewing children's parents about all of the accidents happened in a previous year. Data were collected during the period of August 1 through 31, 2002. The results of the study are as follow: 1. Among 300 children, 282 had 506 accidental injuries during the study period. 2. The month, the day and the time with the highest accident rate were April. Monday, and between 2 and 4 o'clock in the afternoon, respectively. 3. Locations where the injury took place most included nursery schools or kindergartens, around the homes of the children, and inside the home. 4. Most accidents were occurred due to lack of carefulness of the children, and the most prevalent forms of injury was abrasions. 5. Most frequently injured part of the body was legs of the children. 6. Most injuries were healed within three days and required first aid measures to disinfect the wound. Mostly, these were performed by family members at home. Some children go to the hospital to suture the open wound. Most frequent type of complication was scar formation and the cost of the treatment ranged from 9,000 to 30,000 won. 7. Children's age. sex, birth order. personality. type of family composition. type of residency. father's occupation, father's age, and mother's age were significantly related to the frequency of injury among children. Children who were in nursery schools and kindergartens need their assessment for accident involving condition according to seasons, time. place. This study provided a very useful and important data to prepare accident prevention education program and accident prevention strategies, and to develop Injury Surveillance System.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.4
• /
• pp.263-271
• /
• 2020

In this study, we performed a three-dimensional (3D) topology optimization of a fixed offshore structure to enhance its structural stiffness. The proposed topology optimization is based on the solid isotropic material with penalization (SIMP) method, where a volume constraint is applied to utilize an equivalent amount of material as that used for the rule-based scantling design. To investigate the effects of the main legs of the fixed offshore structure on its structural stiffness, the leg region is selectively considered in the design domain of the topology optimization problem. The obtained optimal designs and the rule-based scantling design of the structure are manufactured by 3D metal printing technology to experimentally validate the topology optimization. The behaviors under compressive loading of the obtained optimal designs are compared with those of the rule-based scantling design using a universal testing machine (UTM). Based on the structural experiments, we concluded that by employing the topology optimization method, the structural stiffness of the structure was enhanced compared to that of the rule-based scantling design for an equal amount of the fabrication material. Furthermore, by effectively combining the topology optimization and rule-based scantling methods, we succeeded in enhancing the structural stiffness and improving the breaking load of the fixed offshore structure.

• Fashion & Textile Research Journal
• /
• v.19 no.4
• /
• pp.479-485
• /
• 2017

This study provides basic indices for the development of a pet dog's dummy. Surveys were conducted with 71 owners of small dogs weighing under 10kg as preliminary research for information on pet dogs, uses and complaints about their clothes and demographic information to investigate wearing conditions. We collected pictures of 30 products sold in 12 brands at home and abroad to analyze size, materials, and patterns and investigate the actual production conditions. The survey results on wearing conditions indicated that 'Maltese' was the breed most often raised in households. Dogs weighing 'between 3kg and 4kg' were most common. Dogs under five years of age took up 53.5%. Most of the clothes were 'S' size, followed by 'M' and 'L' Most responded, 'The overall size does not fit' as an inconvenience when worn for long. Second, most brands developed products in three sizes. The displayed details included neck and chest circumference, back length and dummy height. Cotton and artificial leather were used most often for the outer fabric, cotton for the internal filling along with wire and aluminum for some products to maintain shape and motions. Most dummies consisted of back+outer leg, belly, inner leg and sole. Sometimes, a composition line was added by the chest shape, and an incision was placed between the body and leg for breeds with thick legs. Most patterns had a composition line in the leg connected from the belly.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.6
• /
• pp.886-890
• /
• 1999

From previous studies, there is a strong possibility in buffaloes that the marked increase in blood volume (BV) under hot conditions contributes to heat transportation from the rectum to the skin. The present study was done to clarify changes with environmental temperature on water-shift between blood and extracellular fluid (ECF), heat distribution between the rectum and the skin, and blood flow rates (BFR) at the hind legs (reflecting the skin surface). Four buffaloes and four Friesian cows were successively exposed to three different temperatures of $20^{\circ}C$, $30^{\circ}C$ and $35^{\circ}C$. BV and ECF volume were measured with Evans' blue and sodium-thiocyanate dilution methods, respectively. Rectal and subcutaneous (as the skin) temperatures were measured by copper-constantan thermocouples. BFR were measured by a supersonic blood flow meter. With an increase in environmental temperature, skin temperature in buffaloes increased significantly than cows, but rectal temperature was not significantly different between two species. BV, especially plasma compartment, increased significantly in only buffaloes, while ECF volume did not change in both species. BFR increased significantly in buffaloes, but not in cows. From these results, the increased of BV may be caused by water flowing from ECF compartment. The water-shift may induce the increase of BFR and skin temperature. It is suggested in the present study that internal changes of blood compartment in buffaloes contribute to transfer of heat to the skin surface.