• Journal of Power Electronics
• /
• 제19권2호
• /
• pp.454-462
• /
• 2019

When compared to traditional bridge-type inverters, the dual-buck inverter has a higher reliability due to the fact that its bridge legs do not have a shoot-through problem. In this paper, the working principle of the dual-buck inverter is analyzed. A comparison of the working modes under full-cycle and half-cycle control is discussed. With half-cycle control, the inverter can realize a higher efficiency. However, this results in current zero-crossing distortion. The corresponding control strategy of the dual-buck inverter is proposed in order to realize both high efficiency and low current harmonic distortion. In addition, the system stability is analyzed. Dead-time is unnecessary due to the advantages of the topology. Thus, the current harmonic distortion can be further reduced. An inverter with the proposed control strategy has the advantages of high reliability, high efficiency and low current harmonic distortion. Finally, simulation and experimental results are given to verify the theoretical analysis.

• Animal Systematics, Evolution and Diversity
• /
• 제37권1호
• /
• pp.19-25
• /
• 2021

Soldanellonyx monardi Walter, 1919, a halacarid species is newly recorded from South Korea, as the second member for the freshwater halacarid mites in Korea after S. chappuisi Walter, 1917 reported from Gossi-gul Cave, a limestone cave at Yeongwol in 1968. It was collected from three wells in the southeastern part of Korean peninsula this year. Korean specimens are well accorded with S. monardi s. str. in having telofemur I less than 1.5 times longer than wide, two spiniform setae on the ventral side of tibia I, relatively longer anterior dorsal plate (slightly longer than its width and about half the length of posterior dorsal plate), and the posterior epimeral plates lacking a dorsal seta. Based on the Korean specimens, a brief table for the morphological differences between adult females and deutonymphs are provided, which shows a tendency of rather consistent increment according to growth in the number of spiniform dorsal setae on telofemora and genua of legs I and II, the number of perigenital setae, and the number of genital acetabula. In this paper, detailed redescription and a brief table for the morphological differences between adult females and deutonymphs of S. monardi are provided.

• Physical Therapy Rehabilitation Science
• /
• 제11권2호
• /
• pp.119-126
• /
• 2022

Objective: This study aimed to investigate the effect of the application of abdominal brace techniques on muscle activity of the trunk and lower extremities when walking. Design: Cross-sectional study Methods: This study was conducted on 26 healthy adults in their 20s, and the subjects performed two conditions in random order: walking with the abdominal bracing technique and walking in an abdominal relaxation state (normal gait). Muscle activity was measured on the dominant side of all subjects using surface electromyography, and the attachment sites were the erector spinae, external oblique, internal oblique, vastus lateralis, and vastus medialis oblique muscles. Each condition was measured three times to calculate and analyze the average value. Results: When walking using the abdominal brace technique, the muscle activity of the erector spinae, external oblique, internal oblique, and vastus lateralis increased significantly (p<0.05), and the muscle activity of the vastus medialis increased as well but was not significant. Conclusions: The results of this study indicate that it is possible to be used as an effective guide to increasing the muscle activity and stability of the trunk and lower extremities through the application of the abdominal bracing technique during walking.

• Physical Therapy Rehabilitation Science
• /
• 제11권4호
• /
• pp.591-597
• /
• 2022

Objective: The sitting and standing are motions that correspond to the previous stage of rehabilitation to go to walking for daily life. The purpose of this study was to measure task times, path length of the center of pressure (COP) and activity on the vastus femoris muscle using surface electromyography (EMG) when standing up and sitting down. Design: One group cross-sectional design Methods: Fifteen elderly subjects (8 male, 7 female) participated. All subjects were tested three times according to four assist levels (non-assist, lower, middle, and maximal assist) using adjusts the length of spring at sit-to-stand and stand to sit on a chair. The task duration, and COP path length were recorded for the balance function on the Nintendo Wii fit board. The activity of the rectus femoris muscle was recorded on both legs using surface EMG. Results: The results showed that the task duration of the sit-to-stand and stand-to-sit were significantly increased compared to without assist (p<.05). The activation of the rectus femoris muscle more significantly decreased compared to without assistance at standing or sitting (p<.05). Conclusions: The assistive chair showed less quadriceps muscle activation during sitting and standing compared to without assistance. We suggest that our assist-standing chair can help with activities of daily living such as standing up and sitting down movements adjusting the spring length for control assist level by safely.

• Animal Systematics, Evolution and Diversity
• /
• 제39권4호
• /
• pp.254-263
• /
• 2023

Two feather mites, Brephosceles anatina Dubinin, 1951 (Analgoidea: Alloptidae) and Freyana anatina (Koch, 1844) (Pterolichoidea: Freyanidae), have been reported for the first time from the Eastern Spot-billed Duck, Anas zonorhyncha Swinhoe, 1866 (Anseriformes: Anatidae), in Korea. The genera Brephosceles Hull, 1934 and Freyana Haller, 1877 are new records of Korean fauna. The morphology of B. anatina is distinguished from three species of the lambda species group in having legs IV extending the level of setae e2 with the distal end of the tarsus in males, and the incision on the posterior margin of the hysteronotal shield triangular-shaped and distinctly longer than its greatest width in females. Freyana anatina is distinguished from F. nyrocae and F. obliquasetae in having setae ps1 with a rectangle bend in homeomorphic males, and setae ps1 obliquely ovate and divergent, with the inner canal going obliquely across the membranous part of these setae in females. This study provides morphological redescriptions of both feather mite species supplemented with partial sequences of mitochondrial cytochrome c oxidase subunit I(COI), based on specimens collected in Korea.

• Animal Systematics, Evolution and Diversity
• /
• 제40권1호
• /
• pp.21-34
• /
• 2024

Two arenicolus halacarid species, Actacarus ornatus n. sp. and A. pacificus Bartsch, 1979, are recorded from sandy intertidal sediment along the coast of South Korea. Actacarus ornatus n. sp. closely resembles A. karoensis Abé, 1990, recorded from Japan, in having chaetotaxy of the idiosoma, legs, palps of gnathosoma, and perigenital setae in both males and females. However, it differs from A. karoensis by a slightly convex tectum, the presence of a row of foveae on the mid-ventral surfaces of the anterior epimeral plate and genitoanal plate, and the absence of areolae on both the anterior and posterior dorsal plates as well as microplatelets on the membranous cuticle alongside the anterior and posterior dorsal plates. Actacarus pacificus Bartsch, 1979, which is widely distributed in the Indo-Pacific region, is characterized by separated plates, a truncated tectum, the anterior epimeral plate with four pairs of setae, the posterior epimeral plate with one dorsal and two ventral setae, and three pairs of subgenital setae in males. A comparative analysis of the morphological characteristics of A. pacificus was conducted within regional populations, including the Korean population. Moreover, a key to Actacarus species from the northwestern Pacific, including a new species, is provided. The genus Actacarus is reported for the first time from Korea.

• 한국운동역학회지
• /
• 제21권4호
• /
• pp.437-447
• /
• 2011

In this study, the lower limbs joints were analyzed for features based on the biomechanical characteristics of landing techniques according to height and landing on the ground type (flats and downhill). In order to achieve the objectives of the study, changes were analyzed in detail contents such as the height and form of the first landing on the ground at different angles of joints, torso and legs, torso and legs of the difference in the range of angular motion of the joint, the maximum angular difference between joints, the lower limbs joints difference between the maximum moment and the difference between COM changes. The subjects in this study do not last six months did not experience joint injuries 10 males in 20 aged were tested. Experimental tools to analyze were the recording and video equipment. Samsung's SCH-650A model camera was used six units, and the 2 GRF-based AMTI were used BP400800 model. 6-unit-camera synchronized with LED (photo cell) and Line Lock system were used. the output from the camera and the ground reaction force based on the data to synchronize A/D Syc. box was used. To calculate the coordinates of three-dimensional space, $1m{\times}3m{\times}2m$ (X, Y, Z axis) to the size of the control points attached to the framework of 36 markers were used, and 29 where the body was taken by attaching a marker to the surface. Two kinds of land condition, 40cm and 60cm in height, and ground conditions in the form of two kinds of flat and downhill slopes ($10^{\circ}$) of the landing operation was performed and each subject's 3 mean two-way RM ANOVA in SPSS 18.0 was used and this time, all the significant level was set at a=.05. Consequently, analyzing the landing technique as land form and land on the ground, the changes of external environmental factors, and the lower limbs joints' function in the evaluation were significantly different from the slopes. Landing of the slop plane were more load on the joints than landing of plane. Especially, knee extensor moment compared to the two kinds of landing, slopes plane were approximately two times higher than flat plane, and it was statistical significance. Most of all not so much range of motion and angular velocity of the shock to reduce stress was important. In the further research, front landing as well as various direction of motion of kinetic, kinetic factors and EMG variables on lower limbs joints of the study in terms of injury-prevention-approach is going to be needed.

• 한국의상디자인학회지
• /
• 제16권3호
• /
• pp.201-217
• /
• 2014

There is likely to be a fit problem when women aged in their 30s-40s purchase down-age clothing from brands that target women in their 20s. To identify the part of the lower body that causes the fit problem, the sizes and types of lower body of women in their 30s-40s were compared with those of women in their 20s. The data for this study was from the 2010 Size Korea survey of body measurements of 1675 female adults in their 20s-40s. To examine differences in the average sizes of the lower body between women in their 20s and 30s-40s, descriptive statistics and t-tests were conducted. Factor and cluster analysis were used to classify body types by age groups. On the whole, compared to women in their 30s-40s, women in their 20s were found to be higher for all height items and smaller for size, thickness and width items. The result of the Glycemic index analysis showed that the body type of women in their 20s was generally larger than that of women in their 30s-40s. In addition, women in their 20s had a large drop value compared to those in their 30s-40s, whereas flatness of body cross section was bigger in the group of women in their 30s-40s. Four factors related to the lower body type of female adults in their 20s-40s were identified in the factor analysis, and three categories of body type were identified by cluster analysis. A Type 1 individual had abdominal obesity and chubby lower limbs, Type 2 had short legs and slightly chubby lower limbs, and Type 3 had long legs and a skinny lower body. A significant number of women in their 30s-40s were included in the Type 1 group, which was the least common category for women in their 20s.

• 대한통합의학회지
• /
• 제6권4호
• /
• pp.39-45
• /
• 2018

Purpose : The purpose of this study is to investigate the effect of core motion pattern on abdominal muscle thickness on unstable support surface using sling suspension system and to provide an effective exercise program for therapeutic rehabilitation in clinical practice. Methods : In this study, we used the flank exercise using a sling. It was intended for 21 healthy men and 9 healthy women. Before and after the exercise of the subjects, abdominal muscles (EO, IO, TrA the thickness of the muscle) was determined using a diagnostic ultrasonic apparatus. The period of exercise was 3 times a week for 6 weeks. The exercise for each group started with 3 sets per week and 1 set per week was added. A description of the method and attitude of each exercise is as follows. First, the push-up flank 's exercise position is to put both feet on the sling and hold the floor with both hands. Second, the side flank's exercise postures take the side flanks, while the two legs hang on the sling and one arm supports the body with an articulated bend (about $90^{\circ}$). Third, the elbow flank's exercise position is to put the two legs on the sling, and take a flank posture with the arms bent and joint bending (about $90^{\circ}$). Results : There was a significant difference in the thickness of the muscle in the three flank movements after the exercise (p<.05). The most significant difference was in the change of the muscle thickness in the abdominal muscle, the outer muscle, and the stomach in the elbow flank exercise after exercise. There was a significant difference between the mean thickness of the abdominal muscles according to the flank type after exercise (p<.05). Conclusion : In flank exercise for core stabilization using sling, it is considered effective to strengthen the abdominal muscles by considering the support surface, difficulty level, change of movement pattern.

• 한국융합학회논문지
• /
• 제10권9호
• /
• pp.63-68
• /
• 2019

무릎 과다 폄을 가진 대상자에게 비대칭적 선 자세와 같은 외부적 요소가 추가되게 되면 무릎 관절에 가해지는 체중 지지가 더 증가하게 되며, 무릎 뒤쪽 구조들의 과신장이 유발된다. 이는 무릎 과다 폄 변형을 증가시킬 뿐만 아니라, 앞 십자인대와 같은 무릎 주변 연부조직의 변형 및 손상을 유발하는 요인이 될 수 있다. 따라서, 비대칭적 선 자세가 무릎 관절의 위치와 하지 근육의 활성도에 어떠한 영향을 미치는지 알아보는 것이 이 연구의 목적이다. 33명의 자발적 참여대상자들이 연구에 참여하였으며 총 60개의 다리에 대하여 무릎 과다 폄군, 정상군으로 나누어 하지근육의 근 활성도 및 무릎 폄 각도를 측정하였다. 비대칭적 선 자세 시, 무릎 관절 폄 각도와 장딴지근의 근 활성도 값은 정상군과 무릎 과다 폄 군 사이의 통계학적 유의한 차이가 나타났다. 결과를 토대로 비대칭적인 선 자세가 무릎의 과다 폄을 증가시키는 요인이 됨을 확인하였다. 따라서, 무릎 정렬에 이상을 가진 대상자들에게는 정상적인 정렬 회복과 함께 대칭적인 선 자세를 유지할 수 있도록 하는 치료적 중재 수립에 도움을 줄 것이며, 추후 엉덩관절과 발목관절의 영향을 포함한 조사연구가 필요하겠다.