• 한국도로학회논문집
• /
• 제10권2호
• /
• pp.145-157
• /
• 2008

하중전달효율은 다웰이 설치되었거나 설치되지 않은 콘크리트포장 줄눈의 구조적 성능을 나타내기 위해 사용된다. ABAQUS 소프트웨어를 사용한 줄눈 콘크리트장의 3차원 모형이 본 연구를 통하여 구축되었다. 기층과 노상이 접착되어 구성된 하부층 위에 3개의 슬래브가 놓였으며, 스프링 요소를 사용하여 인접한 슬래브를 줄눈에서 연결하였다. 콘크리트포장의 다양한 줄눈강성을 모사하기 위하여 다양한 값의 스프링 상수를 입력값으로 사용하여 그 관계를 조사하였으며, 스프링 상수가 커질수록 줄눈의 하중전달효율이 증가하는 것으로 나타났다. 슬래브와 기증의 다양한 탄성계수와 두께를 사용하여 슬래브의 거동과 하중전달효율에 미치는 재료물성과 기하학적 형상의 영향을 분석하였다. 그 결과 노상의 탄성계수는 기층의 탄성계수와 슬래브 및 기층의 두께보다 더 큰 영향을 미치는 것으로 나타났다. 또한 양 또는 영의 온도구배에서보다는 음의 온도구배에서 슬래브의 거동과 하중 전단효율이 더 민감 하게 변화하였으며, 낮은 강성의 줄눈은 슬래브의 온도구배에 더 민감한 것으로 나타났다.

• 전자공학회논문지D
• /
• 제36D권3호
• /
• pp.48-58
• /
• 1999

본 연구에서는 3차원 반도체 공정 시뮬레이션의 효율성과 성능을 향상시키기 위하여, 병렬 유한요소법 수치해석에 사용이 적합한 디라우니 병렬 메쉬 생성기 및 표면 전진 메쉬 생성기를 개발하였고, 이를 위하여 개선된 성능을 보이는 수정된 하부구조법 병렬 유한요소법 수치해석기를 개발하였다. 또한, 행렬 계산 알고리즘의 병렬화를 확산 및 산화 시뮬레이터에 적용하여, 직렬 계산 시 3시간이 소요되는 확산 시뮬레이션과 비평탄 구조를 지니는 R-LOCOS 등의 연산을 8개의 프로세서를 병렬로 사용하여 15분만에 계산하였다. 과다한 계산 시간을 요하는 몬테카를로 수치해석 방법의 효율성을 높이고자, 병렬 연산 알고리즘을 몬테카를로 연산에 적용하였다. 또한, 스퍼터링 증착장치 시스템의 타켓 입자 분포 특성을 병렬 연산 몬테카를로 방식으로 계산하였다. 3000개의 이온을 주입하였을 겨우 단일 프로세서에서 13,000초의 계산시간이 소요되었으나, 30개의 프로세서를 병렬로 사용하였을 때 520초의 시간을 소비하여,25 이상의 스피드업 특성을 얻었다. 또한, 몬테카를로 계산의 최적화 연구를 통해서 3차원 스퍼터링 증착장치에서 연쇄 충돌 계산 수행시의 최적이온의 개수는 30,000임을 확인하였다.

• 대한치과보철학회지
• /
• 제36권1호
• /
• pp.150-165
• /
• 1998

For the purpose of evaluating the effect of both direct retainer design and bony absorption degree around abutment of indirect retainer on the supporting tissue of abutment of indirect retainer, dislodging force was transmitted to unilateral distal extension RPD bases. Analysis of stress distributed within the supporting tissue around abutment of indirect retainer was carried out. Using three-dimensional photoelastic stress analysis method and the conclusion is a follows. 1. According to the extent of force which the direct retainer of the most distal abutment tooth, the amount of force transmitted to the abutment tooth of indirect retainer was small. 2. Of all the cases, Mandibular first premolar which was used abutment tooth of indirect retainer, buccal, mesial and distal sides represented compression stress and lingual side represented tensile stress. 3. The more bone resorption of abutment tooth of indirect retainer, the more distortion of buccal and distal side of abutment tooth was existed and the extent of compression stress which was existed and distal side to abutment tooth was large. 4. When the alveolar bone around the abutment with indircet retainer is normal. The amount of force transmitted on abutment with indirect retainer was small in the order of Akers clasp, RPA clasp, RPI clasp. 5. When the alveolar bone around the abutment with indirect retainer has been absorbed 20% and 30%, the amount of force transmitted on abutment with indirect retainer was small in the order of RPA calsp, RPI clasp, Akers clasp. 6. When denture is displaced, shape of the direct retainer reciprocating abutment affect much the function of indirect retainer.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제20권2호
• /
• pp.83-87
• /
• 2020

Foreign body (FB) ingestion is commonly seen in the ear nose and throat (ENT) field, with different presentations and sequelae. FBs can arrest in the upper aerodigestive tract or continue further down into either the airway tract to the bronchus or the digestive tract to the intestines. The pathway of an FB depends on the size and shape of the FB and how sharp its edges are. Since the 20th century, the use of disposable stainless-steel needles in the oral cavity has proven to be an effective and safe method for performing various intraoral procedures like dental infiltration or a root canal wash. Complications from their use are rare. Generally, dental needle breakages are caused by patients biting the needle, incorrect injection techniques, or inadequate preventative measures. The sudden movement of a patient during a procedure is one of the most common causes of breakage. Occasionally, needles are swallowed during dental procedures such as a root canal. Here, we report a case of a patient that swallowed a broken needle during a dental procedure. A few days later, the patient presented with neck pain, swelling, and a FB sensation. When the patient presented, she claimed that her symptoms had onset after consuming a meal containing duck meat. Initially, the patient was diagnosed as having ingested a duck bone. However, intraoperatively, the FB was discovered to be an injection needle that had migrated from the throat to the neck.

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2305-2311
• /
• 2002

The pressure tube is a major component of the CANDU reactor, which supports nuclear fuel bundle and heavy water coolant. Pressure tubes are installed horizontally inside the reactor and only selected samples are periodically examined during in-service inspection. In this respect, a probabilistic safety assessment method is more appropriate fur the assessment of overall pressure tube safety. The failure behavior of CANDU pressure tubes, however, is governed by delayed hydride cracking which is the major difference from pipings and reactor pressure vessels. Since the delayed hydride cracking has more widely distributed governing parameters, it is impossible to apply a general PFM methodology directly. In this paper, a PFM methodology for the safety assessment of CANDU pressure tubes is introduced by applying Monte Carlo simulation in determining failure probability Initial hydrogen concentration, flaw shape and depth, axial and radial crack growth rate and fracture toughness were considered as probabilistic variables. Parametric study has been done under the base of pressure tube dimension and hydride precipitation temperature in calculating failure probability. Unstable fracture and plastic collapse are used for the failure assessment. The estimated failure probability showed about three-order difference with changing dimensions of pressure tube.

• 대한기계학회논문집A
• /
• 제27권5호
• /
• pp.742-749
• /
• 2003

Failure of a pipeline due to local wall thinning is getting more attention in the nuclear power plant industry. Although guidelines such as ANSI/ASME B31G and ASME Code Case N597 are still useful fer assessing the integrity of a wall thinned pipeline, there are some limitations in these guidelines. For instance, these guidelines consider only pressure loading and thus neglect bending loading. However, most Pipelines in nuclear power plants are subjected to internal pressure and bending moment due to dead-weight loads and seismic loads. Therefore, an assessment procedure for locally wall thinned pipeline subjected to combined loading is needed. In this paper, three-dimensional finite element(FE) analyses were performed to simulate full-scale pipe tests conducted for various shapes of wall thinned area under internal pressure and bending moment. Maximum moments based on true ultimate stress(${\alpha}$$\sub$u,t/) were obtained from FE results to predict the failure of the pipe. These results were compared with test results, which showed good agreement. Additional finite element analyses were performed to investigate the effect of key parameters, such as wall thinned depth, wall thinned angle and wall thinned length, on maximum moment. Also, the effect of internal pressure on maximum moment was investigated. Change of internal pressure did not show significant effect on the maximum moment.

• 한국항공우주학회지
• /
• 제42권2호
• /
• pp.134-143
• /
• 2014

추운 기후에서 운영되는 풍력터빈 시스템의 표면에 발생한 결빙으로 인하여 공기역학적 성능이 크게 저하될 수 있다. 이러한 결빙은 양력감소 및 항력증가를 야기하고, 발전효율에 부정적인 영향을 미치게 된다. 이로 인하여 풍력발전기의 성능저하 또는 과부하, 무게중심의 변화에 따른 과도진동, 결빙파편이 지상으로 떨어질 경우의 안전성 문제, 계기의 결빙으로 인한 계기 측정오차, 최악의 경우 풍력 시스템 정지 등의 문제가 발생한다. 본 연구에서는 결빙증식이 풍력 발전기의 공력특성에 미치는 영향을 CFD 기법을 이용해 분석하였다. 또한 결빙증식 결과를 바탕으로 BEM 기법을 적용시켜 삼차원 블레이드에 대한 공력성능을 계산하였다. 결빙의 두께는 상대적인 속도차이에 의해 블레이드 중심에서 끝단으로 갈수록 증가함을 알 수 있었고, 공기의 속도가 결빙증식에 미치는 주요 인자임을 확인하였다.

• 패션비즈니스
• /
• 제20권3호
• /
• pp.17-29
• /
• 2016

To develop baseball catcher leg guards, 3-dimensional (3D) methodologies, which are 3D human body data, reverse engineering, modeling, and printing, optimized guard design for representative positions. Optimization was based on analysis of 3D body surface data and subjective evaluation using 3D printing products. Reverse engineering was used for analysis and modeling based on data in three postures: standing, $90^{\circ}$ knee flexion, and $120^{\circ}$ knee flexion. During knee flexion, vertical skin length increased, with the thigh and knee larger in anterior area compared to the horizontal dimension. Moreover, $120^{\circ}$ knee flexion posture had a high radius of curvature in knee movement. Therefore, guard designs were based on increasing rates of skin deformation and numerical values of radius of curvature. Guards were designed with 3-part zoning at the thigh, knee, and shin. Guards 1 and 2 had thigh and knee boundaries allowing vertical skin length deformation because the shape of thigh and knee significantly affects to its performance. Guard 2 was designed with a narrower thigh and wider knee area than guard 1. The guards were manufactured as full-scale products on a 3D printer. Both guards fit better in sitting than standing position, and guard 2 received better evaluations than guard 1. Additional modifications were made and an optimized version (guard 3) was tested. Guard 3 showed the best fit. A design approach based on 3D data effectively determines best fitting leg guards, and 3D printing technology can customize guard design through immediate feedback from a customer.

• 수산해양기술연구
• /
• 제36권3호
• /
• pp.222-233
• /
• 2000

지금까지의 한국 연근해산 참조기의 연령사정은 전부가 비늘에 의한 것이었다. 본 연구에서는 최초로 참조기의 이석을 연령형질로 사용하여 가장 적절한 연령사정 방법을 모색해 보았다. 참조기의 이석은 외관상으로는 윤문이 보이지 않으므로 얇게 절단하여 판독하는 방법(thin section method)이 적절하며, 성장 초점을 기준으로 가로, 세로, 대각선 세 방향으로 얇게 절단하여 윤문이 가장 선명하게 나타나는 방향을 알아본 결과 세로 방향으로 절단했을 경우가 윤문의 판독이 가장 용이하였다. 체장-체중 관계식과 성장식의 추정에서는 지금까지의 성장에 관한 연구에서는 고려되지 않았던 오차구조를 밝혀 매개변수의 추정에 정확성을 기하였다. 체장-체중 관계에서는 체장이 증가함에 따라 오차도 증가하는 곱의 오차구조를 가지며 관계식은 W=$0.0049L^{3.2153}$으로 나타났다. 성장식에서는 오차가 연령이 증가함에 따라 일정한 합의 오차구조를 가지며 비선형 회귀분석에 의한 von Bertalanffy 성장식은 $L_{t}$=37.11(1-e$\^$-0.20+1.88/)로 나타났다.

• 대한수의학회지
• /
• 제40권3호
• /
• pp.451-461
• /
• 2000

The locus coeruleus(LG) is known to be observed a sexual dimorphism in rat CNS. LC is the largest collections of norepinephrine(NE)-containing neurons in the mammalian brain. Especially in rat, all LC neurons contained NE unlike other mammalians, so that specific reactions were found in the tyrosine-hydroxylase(TH) immunoreactive neurons. Sexual dimorphism of rat LC has affected by genes before sex hormone appeared, thereafter affected by sex hormones. In these day, many scientists founded morphological differences between male and female LC morphology, but differences of entire structure was not founded. Thus we investigated sex differences of the LC neuron's morphology in rat by three-dimensional(3-D) reconstruction using Confocal laser scanning microscopy(CLSM). We reported that neuron's shape was relatively-large multipolar neurons and neuron's processes in dorsal LC proceeded to ventral direction in the male and female rat. Male had a longer anterior-posterior length than female had in dorsal LC. In addition to middle-LC, male rat's LC had a more thicker posterior region but had not viewed in a previous study. In reverse, female rat's LC had a thicker anterior region like a previous study. This results using 3-D reconstruction by CLSM showed that the male's LC was more wide-ranging than female's relatively.