• Journal of Ecology and Environment
• /
• v.30 no.3
• /
• pp.251-255
• /
• 2007

Self-thinning was measured in Salix communities on Bam Island in Seoul at various age stages. $D^2H$ was used to estimate tree biomass, where D is stem diameter at breast height or 10 cm height for plants with height <1.5 m, and H is height. A log-log plot of density versus $D^2H$ and correlation analysis indicated a significant relationship between density and biomass with equation 'log $D^2H$ = -1.27 log N + 7.06'. This indicates that self-thinning affects biomass in the Salix community with -1.27 as the thinning coefficient. If we assume a thinning exponent -3/2, then the allometric coefficient of the equation, log w = a log $D^2H$ + b, is 1.18. This is much higher than that for any other species studied in Korea. There were statistically significant relationships between age and density and between age and basal area and these relationships suggest guidelines for transplantation of willows and for the assessment of Salix community restoration projects in riverine wetlands based on standard density, basal area, and age. The results of this study may also increase understanding of succession processes in Salix community restoration in riverine wetlands.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.2
• /
• pp.16-23
• /
• 2003

The study was performed to obtain basic data for high quality timber production and efficient utilization of woods by investigating the effects of thinning on timber quality of domestic Korean pine(Pinus koraiensis Sieb. et Zucc.) planted. The results of this study were summarized as follows ; Comparing the appearance of knot per one meter on log surface, the heavy thinned trees contained less knots than non-thinned ones. And the ratio of dead knots was decreased in heavy thinned trees compared with the non-thinned ones, but the knot size was increased. The inclination angle of dead knot is larger than that of live knot. The crooked logs in heavy thinning plot appeared less than those in non-thinning plot. In heavy thinning plot, the log circle percentage of cross section and the ratio of clear lumber were increased, compared with in non-thinning one. The grade of log was the highest in heavy thinning plot.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.1
• /
• pp.22-26
• /
• 2003

Particleboards (PBs) were made from Pinus densiflora thinning particle with urea-formaldehyde (UF) resin added casein and soybean as extender. The performance test results of the PB made showed that Pinus densiflora thinning log was suitable raw material for PB. As the extender addition in the UF resin was increased, the mechanical performance of the PB, bonded with the extended UF resin, were significantly decreased. However, casein and soybean can be used up to 15% and 20% of the UF resin solids respectively.

• The KIPS Transactions:PartB
• /
• v.8B no.6
• /
• pp.651-656
• /
• 2001

In this paper, we propose Improved Self-Organized Graph(Improved SOG：$SOG^*$)thinning method, which maintains the excellent thinning results of Self-organized graph(SOG) built from Self-Organizing features map and improves the performance of modified SOG using a new incremental learning method of Kohonen features map. In the experiments, this method shows the thinning results equal to those of SOG and the time complexity O((logM)3) superior to it. Therefore, the proposed method is useful for the feature extraction from digits and characters in the preprocessing step.

• The Korean Journal of Ecology
• /
• v.27 no.1
• /
• pp.27-33
• /
• 2004

Cryptomeria japonica plantation was monitored every year during 15 years from 1983 to 1997 for stem diameter and volume. The reciprocal equation, 1/Y = A + B/N, was applied to the relationship between cumulative volume Y and cumulative number N from the largest tree in the stand each year. The parameters A and B, which means respectively the reciprocal of an asymptotic value of total stand stem volume and the reciprocal of the maximum stem volume, are related by a power function. The power functional relationship between A and B derived a linear relationship of B-points ( $N_{B}$, $V_{B}$; $N_{B}$ = B/A, $Y_{B}$ = 1/2A) of each Y-N curve on log-log coordinates. The gradient of B-point line was so steep that the Y-N curve moved parallel upward year by year. The time trajectory of mean stem volume (W) and density ($\rho$) provided evidence in favor of the 3/2 power law of self-thinning, because the gradient of W - $\rho$ trajectory on log-log coordinates approximated to -3/2 at the final stage of stand development. On the basis of the results of Y-N curves and W - $\rho$ trajectory, the time trajectory of maximum stem volume $W_{max obs}$ and $\rho$ was derived theoretically. The gradient of $W_{max obs}$ - $\rho$ trajectory on log-log coordinates is calculated to be -0.6105 at the final stage. The gradient of $W_{max obs}$ - $\rho$ trajectory was steeper than that of W - $\rho$ trajectory at the early stage, while the former is gentler than the latter at the later stage.stage.e.age.e.

• Journal of Korean Society of Forest Science
• /
• v.98 no.4
• /
• pp.451-457
• /
• 2009

This study was conducted to evaluate the felling productivity by chain saw in thinning operation of Korean pine (Pinus koraiensis) stands. Time study data were collected from 4 thinning site in Korean pine stands. This study derived a regression model to estimate the average felling cycle time for evaluating the productivity in felling, which was used to analyze the felling productivity by thinning period. In the study sites, the average felling cycle time per a tree was 463 sec/cycle and the productivity was $2.26m^3/hr$. Thinning period in Korean pine is divided into three groups by producing purposes; small-diameter log, medium-diameter log, and large-diameter log. And analyzed working time and productivity from thinning period fixed by producing purposes. For the small-diameter log producing purpose estimated to be thinning period operated once when the mean DBH was 16 cm and its productivity was $8.94m^3/man{\cdot}day$. For the medium-diameter and large-diameter log producing purposes, thinning period was twice and three times when the mean DBH of the 1st and 2nd thinning period was 16 cm and 21 cm, and its productivity was $9.06m^3/man{\cdot}day$ and $10.86m^3/man{\cdot}day$. The 30 cm in DBH and $15.12m^3/man{\cdot}day$ in productivity was operated 3rd thinning for the large-diameter log producing purposes.

• Journal of the Korean Ceramic Society
• /
• v.42 no.1
• /
• pp.1-6
• /
• 2005

In aqueous alumina tape casting, the effects of altering the composition of the suspensions, the binders and the casting thickness were studied. The rheological behavior of the suspensions and the defects of the dried tapes were examined and the relationships between them are discussed. The changes in the defect regions reported in the previous paper were related with the rheological properties with variations of the binder, the composition and the casting thickness. The shear thinning factor increased with the organic content and the solid content (the decrease of water content). The apparent viscosity increased with the shear thinning factor. The relation between the shear thinning factor and the log apparent viscosity was similar for all binder types. In the relation between the defect free region and the rheological properties, the defect free region became narrower with increasing casting thickness. The defect free region is independent of binder type. Therefore, the thicker tape is more difficult to produce in aqueous alumina tape casting. Knowledge of the rheological properties of the suspensions could help Predict the defect type and the possibility of defect free dried tapes.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.4
• /
• pp.55-59
• /
• 1993

한국의 중서부 지역에서 주로 벌채한 잣나무 간벌 제재목을 경기도 광주 소재 제재소에서 무작위로 추출하여 구입하였다. 본 연구는 휨강도 시험을 표준 시험 방법에 의하여 실시하였다. 각 무결점 시편으로부터 측정한 영 계수와 휨 강도에 대하여 이론적 통계 분포인 정상 분포, Log-normal 분포, Weibull 분포를 계산하여 비교하였다. Weibull 분포가 휨영계수 및 휨강도 모두에 적합하였으며, Log-normal 분포는 영계수 분포에 대한 이용에 적합하였다. 휨강도 분포에서는 Normal 분포가 Log-normal 분포보다 적합하다.

• Journal of Korean Society of Forest Science
• /
• v.104 no.2
• /
• pp.221-229
• /
• 2015

The purpose of study was to broaden our knowledge on the productivity and cost of thinning operations which has become increasingly practiced in Korea. The thinning operations were conducted in a 40-year old larch (Larix leptolepis) stand, including chainsaw felling and processing at the stump, followed by yarding tree-length logs using a Koller K301-4 tower yarder. The logs were further processed and sorted into 1.8 m and 3.6 m log piles at the landing. We used a standard time study method to evaluate key variables that affect the productivity of thinning operations. The total stump-to-pile operational cost was $41,707won/m^3$. The highest cost activity was the yarding phase which cost $20,083won/m^3$ (48.2% of the total cost), followed by the costs of processing treelength materials into marketable log lengths ($12,143won/m^3$; 29.1%), and then by the costs of sorting/piling the processed logs ($5,039won/m^3$; 12.1%). It was interesting to see that felling and processing trees at the stump had low costs at $1,315won/m^3$ (3.2%) and $3,127won/m^3$ (7.5%), respectively. We used the detailed time study data to develop regression equations which were to predict yarding productivity. Our analysis showed that harvesting system cost was highly sensitive to the number of logs, yarding distance and lateral distance per turn, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.3
• /
• pp.41-48
• /
• 1985

In near future about 500,000 hectares of Japanese larch and pitch pine need thinning to improve crop-tree spacing and reasonable species composition in Korea. Although thinned trees show very little high quality wood, in fact, all the sawed products are suitable for construction and farming materials. Studies on the utilization of thinned small-diameter trees have been implemented in order to increase lumber yield and display the skeleton of farm buildings. The results obtained in this study were summarized as follows: 1. According to Korean Conifers Log Grading System, log grade 3 was 87.4 percent in Japanese larch bolts and 95.8 percent in pitch pine bolts from thinned trees. The ability to identify defects was essential for grading logs. 2. Cutting diagrams of sawing were developed for 1-sided sawing, 2-sided sawing and 3-sided sawing by small end diameter class of bolt and cutting sizes also were found to use effectively lumber with wane. 3. Lumber recovery of Pitch pine was a little higher than that of Japanese larch. The maximum lumber yields of pitch pine by sawing patterns were 87.2 percent for 1-sided sawing, 80.8 percent for 2-sided sawing an 64.1 percent for 3-sided sawing, up yield compared with 58.1 percent for 4-sided sawing. The lumber yield of 1, 2 and 3-sided sawing significantly was higher value than that of 4-sided sawing. 4. Lumber was inspected and graded. Lumber quality of diameter class 12cm was a little better than that of diameter class 8cm, but 90 percent of lumber in diameter c1ass 16cm fell into grade 3. The lumber grade was classified by Korean standard grades of confiers lumber. 5. Lumber from 1, 2 and 3-sided sawing was used to build the skeleton of a farm house ($53m^2$) and greenhouse ($60m^2$) in order to display more efficient use of small diameter trees from thinning 6. Total volume of timber for building a farm house was $8.1m^3$ of imported timber. Timber of $7m^3$, 70 percent of total volume would be substituted imported timber for domestic timber.