• 한국소음진동공학회논문집
• /
• 제18권2호
• /
• pp.263-271
• /
• 2008

Compressor radiated noise is one of the dominant noise for the outdoor unit of the air conditioner. Therefore, air conditioner makers are trying to reduce it continuously. Even though noise absorption and isolation technology are one of the important parts for reducing the noise from the compressor, it is usually treated to the substitute technology when the noise from the compressor is very difficult to reduce by the compressor noise control only. In this paper, we focus on the property of the sound insulation for the cabinet and measure it applying the theory of the sound transmission loss and insertion loss of the simple enclosure. The insertion loss is evaluated by the experiments according to the thickness and the aperture of the partition in the cabinet.

• 한국화재소방학회논문지
• /
• 제21권3호
• /
• pp.91-96
• /
• 2007

수계소화시스템 버터플라이 밸브의 성능해석에 대한 연구를 수행하였다. 버터플라이 밸브의 성능해석으로는 토크특성, 압력손실과 캐비테이션을 고찰하였다. 밸브의 토크특성은 토크 이론식에 밸브 디스크의 개도각이 보정되었고, 보정식이 추가되었다. 밸브의 열림각에 대한 압력손실계수는 Carnot 방정식을 응용하여 수식화하였다. 버터플라이 밸브의 토크특성, 압력손실과 캐비테이션은 디스크의 두께와 직경 비에 대해 해석하였다. 캐비테이션은 밸브의 압력손실계수로부터 해석하였다. 압력손실과 캐비테이션 해석은 밸브의 열림각에 대한 두께 비의 변화에 따라 수행하였다. 이들 해석 데이터는 버터플라이 밸브를 개발하는데 필요한 엔지니어링 데이터로 활용하고자 한다.

• Journal of Magnetics
• /
• 제13권3호
• /
• pp.92-96
• /
• 2008

There are few reports of high frequency loss behavior in the near-field for magnetic films with semiconducting properties, even though semiconducting magnetic materials, such as soft magnetic amorphous alloys and nanocrystalline thin films, have been demonstrated. The electromagnetic loss behavior of multilayer magnetic films with semiconducting properties on the microstrip line in quasi-microwave frequency band was analyzed numerically using a commercial finite-element based electromagnetic solver. The large increase in the absorption performance and broadband characteristics of the semiconducting/insulating layer magnetic films examined in this study were attributed to an increase in the loss factor of resistive loss. The electromagnetic reflection increased significantly with increasing conductivity, and the loss power deteriorated significantly. The numerical results of the magnetic field distribution showed that a strong radiated signal on the microstrip line was emitted with increasing conductivity and decreasing film thickness due to re-reflection of the radiated wave from the surface of the magnetic film, even though the emitted levels varied with film thickness.

• 대한기계학회논문집B
• /
• 제32권5호
• /
• pp.351-358
• /
• 2008

Extinction characteristics of hydrogen-air diffusion flames at various pressures are investigated numerically by adopting counterflow flame configuration as a model flamelet. Especially, effect of radiative heat loss on flame extinction is emphasized. Only gas-phase radiation is considered here and it is assumed that $H_2O$ is the only radiating species. Radiation term depends on flame thickness, temperature, $H_2O$ concentration, and pressure. From the calculated flame structures at various pressures, flame thickness decreases with pressure, but its gradient decreases at high pressure. Flame temperature and mole fraction of $H_2O$ increase slightly with pressure. Accordingly, as pressure increases, radiative heat loss becomes dominant. When radiative heat loss is considered, radiation-induced extinction is observed at low strain rate in addition to transport-induced extinction. As pressure increases, flammable region, where flame is sustained, shifts to the high-temperature region and then, shrunk to the point on the coordinate plane of flame temperature and strain rate. The present numerical results show that radiative heat loss can reduce the operating range of a combustor significantly.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.241-246
• /
• 2001

This study considered the transmission loss and frequency characteristecs of window, and examined the transmission loss for each type of windows to design an optimized window for blocking external noise. Moreover this has detect the transmission loss which depending on the thickness and the types(single and fair glass) of window as several major factors of transmission loss design. With this result, this study suggests a window design guide for much silent condition which is below the level of noise standard recommended.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권2호
• /
• pp.171-177
• /
• 2013

The aim of the present study was to determine the evidence of post-parturient disorders and backfat loss during lactation in sows raised in tropical areas in relation to their backfat thickness before farrowing and postpartum intravenous supportive treatment. Backfat thickness was measured using A-mode ultrasonography at farrowing and weaning ($25.5{\pm}1.4$ d) in 70 sows. The sows were divided into three groups according to backfat thickness before farrowing, i.e., 15.0 to 20.0 mm (n = 21), 20.5 to 25.0 mm (n = 35), >25.0 mm (n = 14) and were categorized into two groups according to the postpartum supportive treatment, i.e., control (n = 31) and treatment (n = 39). After farrowing, the sows in treatment group received the same medications as in control sows. Furthermore an intravenous supportive treatment with amino acids and vitamins was administered in treatment groups. Rectal temperature and clinical signs of the sows including vaginal discharge, udder problems and appetite were determined at d 0, 1, 2 and 3 of parturition. It was found that, on average, the backfat thickness was $22.4{\pm}3.9$ mm at farrowing and $19.9{\pm}2.9$ mm at weaning. The backfat loss and the relative backfat loss during the lactation period were 2.6 mm and 10.6%, respectively. The sows with a backfat of 15.0 to 20.0 mm before farrowing lost less backfat than those with a backfat of 20.5 to 25.0 mm and >25.0 mm (p<0.05). Sows with a backfat of 15.0 to 20.0 mm had a better appetite on d 1 postpartum than sows with a backfat of 20.5 to 25.0 mm (p = 0.020). The percentage of sows losing backfat >10% during lactation were higher in sows with a backfat of >25.0 mm before farrowing (85.7%) than sows with a backfat of 15.0 to 20.0 mm before farrowing (35.0%) (p = 0.008). The percentage of sows with a reduced appetite on d 1 (90.3% vs 71.8%, p = 0.018) and d 2 (61.3% versus 33.3%, p = 0.005) postpartum in the treatment group was lower than the control group. In conclusion, the backfat thickness of sows at farrowing influenced backfat loss during lactation under hot and humid climates. The intravenous supportive treatment of sows with amino acid and vitamins significantly improved the appetite of postpartum sows.

• Journal of the Korean Wood Science and Technology
• /
• 제37권4호
• /
• pp.293-299
• /
• 2009

섬유판을 이용한 탄화보드의 제조에 있어 무할렬 탄화법 및 탄화온도에 따른 수축률, 중량감소율 및 밀도변화에 대해 검토하였다. 섬유판을 두께별(3, 4.5, 6, 18 mm)로 준비한 후, 실험실용 탄화로를 사용하여 $400^{\circ}C{\sim}1,000^{\circ}C$의 온도조건에서 탄화보드를 제조하였다. 무할렬 탄화법은 시험편에 상하 눌림판을 설치하여 압체 탄화하는 방법을 적용하였다. 압체 탄화법에 의해 섬유판의 갈라짐과 뒤틀림 현상이 발생하지 않는 무할렬 탄화보드의 제조가 가능하였다. 탄화보드의 수축률은 길이방향 10~25%, 폭방향 12~25%, 두께방향 28~48%로 두께방향이 가장 크고 탄화온도가 상승함에 따라 커지는 경향이 나타났다. 탄화보드의 중량감소율은 섬유판의 두께에 따른 큰 차이는 나타나지 않았고 탄화온도가 상승함에 따라 커지는 경향이 나타났다. 탄화보드의 밀도는 두께 3 mm의 경질 섬유판에서 가장 컸고 탄화온도가 상승함에 따라 커지는 경향이 나타났다.

• 한국소음진동공학회논문집
• /
• 제16권7호
• /
• pp.690-696
• /
• 2006

Thickness of damping layer in sandwich plate needs to be optimized in order to make modal loss factor of the sandwich plate maximum. Since previous studies were interested in noise reductions over high frequency range, the modal properties were derived based on simply supported boundaries. This conventional formula is approximately applicable to other boundary conditions over high frequency range only. The purpose of this study is to propose a method to determine optimum damping layer thickness of sandwich plate for maximum modal damping in low frequency range when the boundary condition is not a simple support. The conventional RKU equation based on simply supported boundary is modified to reflect other boundary conditions and the modified RKU equation is subsequently applied to determine the optimum damping layer thickness for arbitrary conditions. In order to reflect frequency-dependent characteristics of elastic modulus of the damping layer, an iteration method is proposed in determining the modal properties. Test results on sandwich plates for optimum damping layer thickness are compared with predictions by the proposed method and conventional method.

• 한국식품영양과학회지
• /
• 제30권2호
• /
• pp.273-276
• /
• 2001

서로 다른 온도($3^{\circ}C와\;25^{\circ}C$)에서 저장한 감귤류에서의 과피 두께와 품질변화간의 상관관계를 살펴보았다. $3^{\circ}C보다\;25^{\circ}C$에서 저장한 감귤의 중량손실은 컸으나 당도(%Brix)는 저장온도에 상관없이 일정하게 증가함을 보였다. 픽셀로 표현되어지는 과육의 두께도 높은 저장온도에서 급격하게 변화됨을 보였다. 위와 같은 성분들은 시간에 따른 0차 반응속도로 분석한 결과 각 온도에서의 반응상수들이 구하여졌다. 과육의 두께를 회기선형모델에 적용한 결과, 저장기간을 예측할 수 있었고 그때의 중량감소나 당도변호가 과육 두께의 함수로 표현되어질 수 있었다.

• Journal of electromagnetic engineering and science
• /
• 제16권3호
• /
• pp.150-158
• /
• 2016

This paper reports on a study of LiNiZn-ferrite composite as a radiation absorbent material (RAM). The electromagnetic (EM) wave absorbers are composed of an EM wave absorbing material and a polymeric binder. The surface morphology, chemical composition, weight percent of the ferrite composite of the toroid sample, magnetic properties, and return loss are investigated using field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and network analyzer. For preparing the absorbing sheet, chlorinated polyethylene (CPE) is used as a polymeric binder. The EM wave absorption properties of the prepared samples were studied at 4 - 8 GHz. We can confirm the effects of the thickness of the samples for absorption properties. An absorption bandwidth of more than a 10-dB return loss shifts toward a lower frequency range along with an increase in the thickness of the absorber.