• 대한족부족관절학회지
• /
• 제12권2호
• /
• pp.122-127
• /
• 2008

Purpose: To evaluate the clinical outcome of proximal plantar fasciitis after nonoperative treatment, and also to find the correlation of the heel pain with the plantar fascia thickness measured by ultrasonography. Materials and Methods: The study is based on 41 patients, 46 feet of the proximal plantar fasciitis that were treated conservatively with at least 12 months follow-up. All were treated with heel pad, Achilles and plantar fascia stretching and pain medications for at least 3 months. Heel ultrasonography was performed at the beginning of the treatment to measure the plantar fascia (PF) thickness and the echogenicity. PF thickness over 4 mm and less were grouped in to group A and B respectively to compare the clinical outcome. Results: Average thickness of the PF at the calcaneal attach was 5.2 mm. Symptom duration before the treatment was average 13.2 month; group A being 14.6 months and group B being 9.0 months with no significant difference (p=0.09). As functional evaluation, Roles-Maudsley score improved from 3.4 initially to 2.3 at final follow-up, while morning heel pain also improved from average VAS pain score of 7.2 to 4.0. However Maudsley and VAS score both didn't show statistical difference between the 2 groups (p>0.05). Conclusion: Plantar fasciitis improved substantially with the nonoperative treatments. However, the 2 groups, divided according to 4 mm thickness by ultrasonography, didn't show significant difference in either symptom duration or in the clinical outcomes.

• 한국도로학회논문집
• /
• 제19권5호
• /
• pp.43-48
• /
• 2017

PURPOSES : The purpose of this study is to verify the effects of fiber grid reinforcement on the thickness reduction of asphalt pavement. Test sections were constructed on the national highway to evaluate the structural capacity of asphalt pavement with the reinforced fiber grid and normal asphalt pavement. METHODS : Falling Weight Deflectometer (FWD) tests were performed to measure the structural capacity of test sections. The loads of the FWD test are 4.1 ton, 8.0 ton, 10.0 ton, and loaded twice, respectively. The test sections consist of a reference asphalt pavement section, an asphalt pavement section reduced with a 5-cm base layer thickness, and a fiber grid reinforced asphalt pavement section reduced with a 5-cm base layer thickness. In addition, strain data was collected using strain gauges installed in the test sections. RESULTS : The results of the FWD tests showed that the deflections of the pavement section reinforced with the fiber grid was reduced by about 14% compared with that of the reference asphalt pavement section. The strain at the bottom of the asphalt surface layer of the pavement section reduced to a 5-cm base thickness and reinforced with a fiber grid was similar to that at the bottom of the asphalt layer of the reference asphalt pavement. CONCLUSIONS : The results of the FWD and strain tests showed the possibility of the pavement thickness reduction by reinforcement with a fiber grid.

• Clinics in Shoulder and Elbow
• /
• 제9권1호
• /
• pp.73-82
• /
• 2006

Purpose: The purpose of the present study was to evaluate the diagnostic efficacy of CT arthrography (CTA) in the assessment of various shoulder pathologies, compared with MR arthrography (MRA) and MRI with arthroscopic correlation. Materials and Methods: CTA in 84 patients, MRA in 70 patients, and MRI in 27 patients were obtained. A radiologist interpreted each image for 5 pathologies: Bankart, SLAP, Hill-Sachs lesion, full-thickness, and partial-thickness rotator cuff tear. Detailed arthroscopic reports were compared with CTA, MRA, and MRI. The sensitivity, specificity, predictive values, and accuracy were calculated. The agreement between each diagnostic modality and arthroscopy was calculated. Diagnostic efficacy was assessed by the areas under the receiver operating characteristic (ROC) curves. Results: The diagnostic values of all three imaging groups were comparable to each other for Bankart, SLAP, Hills-Sachs, and full-thickness cuff tear lesions, but those of CTA were lower than MRI and MRA for partial-thickness cuff tears. The areas under the ROC curves for CTA, MRA, and MRI were not significantly different for all pathologies, except for partial-thickness cuff tears. Conclusion: CTA was equally competent to MRA or MRI in demonstrating Bankart, Hill-Sachs lesions, SLAP, and full thickness rotator cuff tears but not as efficient in diagnosing partial thickness rotator cuff tears.

• 한국산학기술학회논문지
• /
• 제10권8호
• /
• pp.2157-2163
• /
• 2009

소프트 콘택트렌즈의 산소투과성은 눈의 생리적 반응을 고려할 때 각막의 건강 상태를 결정하는 주요 파라미터이다. 이 연구의 목적은 폴라로그래피 방법을 이용하여 두께 기준에 따른 소프트 콘택트렌즈의 산소투과성을 평가하는데 있다. 렌즈의 두께는 접촉식과 비접촉식 방법으로 측정하였고, 정확도와 신뢰도를 평가하기 위하여 Bland-Altman 분석을 하였다. 정확도는 비접촉식 방법으로 측정한 중심 두께 기준의 산소투과성에서 높은 반면, 신뢰도는 접촉식 방법으로 측정한 중심 두께 기준의 산소투과성에서 높았다. 이 결과는 소프트 콘택트렌즈의 두께 측정방법과 기준에 따라 산소투과성이 다르며, 소프트 콘택트렌즈의 두께 측정은 비접촉식 방법이 보다 더 합리적임을 보여준다. 따라서 콘택트렌즈 임상 실무자들은 산소 공급 능력에 대한 데이터를 해석하거나 인용할 경우, 방법론 사이의 기본적 차이를 고려하여야 한다.

• 상하수도학회지
• /
• 제26권5호
• /
• pp.669-683
• /
• 2012

The water supply pipes are buried across wide range of areas, so it is hard to spot them using excavation and takes a large amount of expense. Thus, there is a high risk for direct research and application, accompanying many difficulties in implementation of them. Therefore, it is more economical and convenient to use indirect evaluation variables than direct evaluation of the buried pipes in assessing the degree of pipe deterioration. To assess the degree of pipe deterioration using the indirect evaluation variables, it should be done first to identify how and to what extent they affect the degree of deterioration. This study measured the evaluation variables for pipe deterioration using the pipe endoscope and analyzed the measurement results and the degree of impact on the pipes. In addition, this study attempted to evaluate the adequateness of the pipe deterioration evaluation using the indirect variables based on the analysis results. The evaluation variables measured through the pipe endoscope were the thickness of sediments, size of scale, degree of desquamation and condition of connections. For the indirect evaluation variables, the data such as the property data from GIS pipe network map as well as the material, diameter, age and pipe lining material of the pipe, road type, leakage frequency, average water velocity and water pressure using the leakage repair records was collected. Using the collected data, this study comparatively analyzed the indirect evaluation variables for the degree of pipe deterioration and the results from the pipe endoscope to choose appropriate variables for pipe deterioration evaluation and calculated the weights of the indirect variables on the degree of deterioration. The results showed that the order of the impact of indirect variables on deterioration was pipe age > pipe lining material > road type > leakage frequency > average water velocity with their weights of 0.45, 0.20, 0.15, 0.10, and 0.10, respectively. Conclusively, the results suggest that the measures of sediment thickness, scale size, degree of desquamation and condition of connections are appropriate for the evaluation of pipe deterioration and sufficient for the analysis of the impact of the indirect variables on deterioration.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.363-367
• /
• 2009

Recently, the manufacturing of micro-cavity by means of laser surface texturing (LST) technique and low friction study by the LST have been in great progress. Most of current works have been dealing with the effect of cavity on friction and wear. The main objective of the present study was to investigate numerically two-dimensional lubrication characteristics of micro-dimple shapes fabricated on solid surfaces, and this study utilized the commercial CFD code (Fluent V.6.3). For the evaluation, preliminary simulation was conducted and numerical predictions were compared with the analytic solution obtained from the Reynolds's equation. Mainly, the present study investigated the influence of dimple depth, pattern shapes, and film thickness on lubrication characteristics related to the reduction of friction. It is found that the existence of micro-dimpled surface makes it possible to substantially reduce the friction forces exerted on the surfaces. In particular, substantial decrease in shear stresses was observed as the lubricant film thickness decreases. For instance, in the case of the film thickness of 0.01 mm, the estimated shear stress decreases up to about 40%. It indicates that the film thickness would be important factor in designing the micro-dimpled surfaces. Furthermore, it was observed that such a optimum dimple depth would be present because the dimple depth larger than the optimum value did no longer affect the reduction in shear stresses.

• 한국표면공학회지
• /
• 제25권6호
• /
• pp.309-317
• /
• 1992

Evaluation of electroplated gold has been carried out to obtain the data base for electrical, mechanical and environmental properties for telecommunication component applications. Gold plating was performed to a various thickness of $0.1\mu\textrm{m}$ to 1.$25\mu\textrm{m}$ after Ni plating of $3\mu\textrm{m}$ on C52100 bronze. Electrical properties were evaluated by measuring contact resistance using 4-wire method under static contact and dynamic contact during wear. Reciprocating wear test was performed to study the wear behavior as well as failure of gold contacts. Environmental characteristics were evaluated by using salt spray testing and SO2 test. Hardness of soft gold film was measured to be 53KHN under 5g load. Friction coefficient was initially obtained to be 0.15 and 0.25 under 100g and 200g loads respectively, and then raised up to 0.8 with increasing reciprocating wear cycles. Static contact resistance was 2 to 3m$\Omega$ regardless of gold film thickness while drastic changes of contact resistance were occured upon stripping of the gold film during wear. The lifetime of contact wear showing stable contact resistance increased up to 6 times for $1\mu\textrm{m}$ thickness compared to that of$ 0.1\mu\textrm{m}$ thickness under 100g load. All gold plating appeared to be stable under salt atmosphere while only the gold plating over 1$\mu\textrm{m}$ was stable under SO2 atmosphere.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권5호
• /
• pp.827-836
• /
• 2004

The design parameter of the heat loss for the pressurized water reactor has been studied. The heat loss from the reactor vessel through the air gap. insulation are analysed by using the computational fluid dynamics code, FLUENT. Parametric study has been performed on the air gap width between the reactor vessel wall and the inner surface of the insulation, and on the insulation thickness. Also evaluated is the performance degradation due to the chimney effect due to gaps left between the panels during the installation of the insulation system. From the analysis results, the optimal with of air gap and insulation thickness and the value of heat loss are obtained The results show how the heat loss varies with the air gap width and insulation thickness. The temperature and the velocity distributions are also presented. From the results of the evaluation. the optimal air gap width and the optimal insulation thickness are obtained. As the difference between the predicted heat loss and measured heat loss from the reactor vessel is construed Primarily as losses due to chimney effect. the contribution of the chimney effect to the total heat loss is quantitatively indicated.

• 한국생산제조학회지
• /
• 제20권6호
• /
• pp.773-777
• /
• 2011

Conventional ultrasonic thickness measurement is to be considered as the assumption that the ultrasonic velocity is known. In actual applications the velocity is often not well known and access is often limited to one side. This paper aims at determining the ultrasonic velocity and thickness of plates with parallel or wedged surfaces using contact measurements made on one surface only. For wedged plates the thickness at one point and the wedge angle are determined. Equations are used for determining the ultrasonic velocity, thickness and wedge angle of the plate based on the times-of-flight measured by two contact transducers coupled to one surface. The time-of-flight of the obliquely reflected longitudinal wave echo was measured as a function of the separation between the two transducers. In addition, a simulation was made for comparing the experimental data and a FEM image. Experiments and simulations were performed on flat and wedged plates of aluminium materials; the calculated results for the unknown quantities are generally agreed with them to some degree.

• Structural Engineering and Mechanics
• /
• 제65권2호
• /
• pp.191-201
• /
• 2018

The corrosion environments in a steel structure are significantly different depending on the individual parts of the members. To ensure the safety of weathering steel structures, it is important to evaluate the time-dependent corrosion behavior. Thus, the progress and effect of corrosion damage on weathering steel members should be evaluated; however, the predicted corrosion depth, which is affected by the corrosion environment, has not been sufficiently considered until now. In this study, the time-dependent thicknesses of the corrosion product layer were examined to quantifiably investigate and determine the corrosion depth of the corroded surface according to the exposure periods and corrosion environments. Thus, their atmospheric exposure tests were carried out for 4 years under different corrosion environments. The relationship between the thickness of the corrosion product layers and mean corrosion depth was examined based on the corrosion environment. Thus, the micro corrosion environments on the skyward and groundward surfaces of the specimens were monitored using atmospheric corrosion monitor sensors. In addition, the evaluated mean corrosion depth was calculated based on the thickness of the corrosion product layer in an atmospheric corrosion environment, and was verified through a comparison with the measured mean corrosion depth.