• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.46-53
• /
• 1994

본 연구(硏究)는 목섬유(木纖維)와 열가소성(熱可塑性) 플라스틱의 복합재료(複合材料)를 제조하고 그 기계적(機械的) 성질(性質)을 평가하기 위하여 실행되었다. 강도가 높고 밀도가 낮아 플라스틱의 보강재료로써 잠재성을 갖는 목섬유를 2종의 열가소송 플라스틱(폴리프로필렌과 폴리에틸렌)과 혼합(混合)하여 복합재료(複合材料)를 만들었다. 흡습성(吸濕性)인 목섬유와 비흡습성(非吸濕性)인 플라스틱과 친화성을 위해 계면활성제(界面活性劑)를 사용하였다. 또한 낮은 밀도의 목섬유를 플라스틱내에서 혼합하기 위해 고속 플라스틱믹서를 사용하였다. 사출성형(射出成形)한 샘플을 사용하여 기계적(機械的) 성질(性質)을 시험(試驗)한 결과 인장및 휨강도는 목섬유 혼합량에 따라 크게 향상되었다. 휨 강도(强度)는 인장강도(引張强度)보다 훨씬 크게 나타났으며 인장(引張)및 휨탄성(彈性) 계수(係數)는 플라스틱내 목섬유 혼합량과 비례적으로 증가하였다. 목섬유는 복합재료의 강도(强度)와 탄성계수(彈性係數)를 향상시킴으로서 플라스틱을 보강할 수 있었다. 이와는 반대로 인장시험에서 시편 파괴점까지의 신장율과 파괴에너지는 목섬유 혼합량이 증가함에 따라 감소하였다. 충격강도(衝擊强度) 역시 유사한 경향을 보였다.

• 한국기계연구소 소보
• /
• 통권18호
• /
• pp.163-168
• /
• 1988

Impregnation of molten thermoplastic resin into continuous unidirectional fiber bundles was investigated. The degree of impregnation is defined as the ratio between the number of impregnated fibers and the total number of fibers of a bundle. The degree of impregnation was modeled as a function of time, impregnation pressure, temperature and tow size assuming the radial inward flow through the fiber bundle is governed by the Darcy's law. The permeability was assumed to be constant. Experiments were performed to evaluate the validity of the medel. Today's T300 graphite fiber bundles and Polyetheretherketone(PEEK) resin was used. A fiber bundle and resin powder were put into a mold and pressure and temperature were applied. After a predetermined time, the sample was taken out and microphotographs of the cross-section were taken. From the microphotographs, the number of impregnated fibers was counted and then the degree of impregnation was determined. Experiments were also performed for different tow sizes. Good agreements were found between the model and the experiments rendering a confidence in the model.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.67-70
• /
• 2000

This study was performed to investigate the material behavior of hybrid thermoplastic composites contained glass fiber and calcium carbonate. The composite was prepared with each combination ratio of calcium carbonate, and the content of glass fiber was fixed with 10% by weight. In order to investigate the material behavior for various combination ratio, tension test, flexural test, and impact test were performed. Microscopic observation were conducted to examine the fractured surface of specimen for tension test. And the material behavior of the hybrid thermoplastic composite immersed in salt water with definite time was investigated.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1997년도 추계총회 및 학술발표회 논문집
• /
• pp.126-130
• /
• 1997

A series of Thermoplastic polyurethane elastomers was prepared via a two-step polymerization process. The NCO/OH feed ratio of polyurethane synthesized in this study was varied from 1 to 1.3. Studies have been made on the effects of chemical and physical cross-linkina, and the properties of thermoplastic polyurethane elastomers based on isophorone diisocyanate (IPDI)/1,4-butanediol (BD)/poly(propylene glycol) (PPG, MW:2000), isophorone diisocyanate (IPDI)/BD /poly(oxytetramethylene) glycol (PTMG, MW:2000) was compared. These materials were characterized using FTIR spectrometer, dynamic mechanical thermal analyzer, and tensile retraction tester. PTMG based polyurethane elastomers showed higher elasomeric behavior than PPG based polyurethane elastomers at the same NCO/OH ratio. This feature has been connected with the specific nature of the polyols. The permanent set(%) was decreased with increasing maximum elongation from 50% to 300%.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.326-330
• /
• 2004

Thermosetting matrix composites have disadvantages in terms of moulding time, repairability and manufacturing cost. Thus the high-performance thermoplastic composites to eliminate such disadvantages have been developed so far. As a result of environmental and economical concerns, there is a growing interest in the use of thermoplastic composites. However, since their mechanical properties are very sensitive to the environment such as moisture, temperature etc., those behaviors need to be studied. Particularly the temperature is a very important factor influencing the mechanical behavior of thermoplastic composites. The effect of temperature have not yet been fully quantified. Since engineering applications of reinforced composites necessitate their fracture mechanics characterization, work is in progress to investigate the fracture and related failure behavior. An approach which predicts the tensile strength was perpormed in the tensile test. The main goal of this work is to study the effect of temperature on the result of tensile test with respect to GF/PE composite. The tensile strength and failure mechanisms of GF/PE composites were investigated in the temperature range $60^{\circ}C\;to\;-50^{\circ}C$. The tensile strength increased as the fiber volume fraction ratio increased. The tensile strength showed the maximum at $-50^{\circ}C$, and it tended to decrease as the temperature increased from $-50^{\circ}C$. The major failure mechanisms was classified into the fiber matrix debonding, the fiber pull-out, the delamination and the matrix deformation.

• Composites Research
• /
• 제32권5호
• /
• pp.229-236
• /
• 2019

본 연구에서는 자동 섬유 적층(AFP) 장비로 제작한 열가소성 복합재에 대하여 추가 공정을 수행한 후 기계적 물성에 미치는 영향을 평가하였다. 제작을 위한 기초 연구로써 AFP의 공정 변수를 통해 열가소성 복합재를 제작하였으며 제작된 열가소성 복합재에 어닐링(Annealing) 및 진공백(Vacuum bag only) 공정을 수행하였다. 추가 공정 후 검증을 위해 결정화도 및 기공률 측정을 수행하였다. 결정화도는 시차 주사 열량 측정법(Differential scanning calorimetry)을 통해 측정하였으며 반 결정 구조인 열가소성 복합재의 공정 조건에 따른 결정화도 변화를 확인하였다. 기공률 측정을 위해 수지 용해를 수행하였으며 현미경 촬영을 통해 기공 분포를 확인하고 수지 용해법을 통해 기공률을 계산하여 공정 조건에 따른 기공률 변화를 관찰하였다. 검증 후 수행한 층간 전단 강도 시험 결과 AFP로 제작한 열가소성 복합재의 경우 결정화도 보다 기공률 값이 기계적 물성에 더 많은 영향을 미쳤다. 또한 진공백 공정을 통해 열가소성 복합재를 녹는점까지 도달시켰으며 진공상태에서 지속적으로 열가소성 복합재 내의 기공을 제거함에 따라 층간 전단 강도가 증가하는 것을 확인하였다.

• Composites Research
• /
• 제33권6호
• /
• pp.346-352
• /
• 2020

열가소성 복합재료는 수송용 기기의 구조용 소재로써 적용 분야가 확대되고 있다. 따라서 본 연구에서는 유리섬유(GF) 함량 차이에 따른 연속섬유 강화 GF/폴리프로필렌(PP)의 기계적 물성 및 함침성에 대한 평가를 진행하였다. GF 함량이 다른 GF/PP 복합원사를 제조하고 이를 이용하여 연속가압공정법으로 연속섬유 강화 GF/PP 중간재를 제조하였다. GF 함량에 따른 연속섬유 강화 GF/PP 복합재료의 인장강도, 굴곡강도 및 충격강도를 평가하였다. 전계방사형 주사전자현미경을 이용하여 인장파괴 된 GF/PP의 형태를 분석하여 GF 함량에 따른 파괴거동을 확인하였고, 동적기계분석 및 층간전단강도 측정 결과를 바탕으로 GF 함량에 따른 함침성 차이를 확인하였다. 궁극적으로 GF/PP 50 wt.% 복합재료 조건에서 기계적 강도와 함침성이 가장 안정화됨을 확인하였다.

• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1416-1422
• /
• 2001

The objective of this work was to characterize mechanical properties of thermoplastic composites with various forming conditions in compression molding. Randomly oriented long glass fiber reinforced polypropylene(PP) was used in this work. The composite materials contained 20%, 30%, and 40% glass fiber by weight. Compression molding was conducted at various mold temperatures and charge sizes. The temperatures on the mold surface and at the material in the mid-plain were monitored during the molding. Differential Scanning Calorimeter was used to measure crystallinity at both in-side and out-side of the sheet material. Crystallinity at each temperature was also measured by X-ray diffractometer. Dimensional stability was studied at various conditions with the spring forward angle. Among the processing parameters, the crystallization time at the temperature above 130$^{\circ}C$, was found to be the most effective. Spring-forward angle was reduced and the tensile modulus was increased as the mold temperature increased.

• 대한기계학회논문집A
• /
• 제26권12호
• /
• pp.2550-2555
• /
• 2002

Hybrid composites usually are defined as composites having different types of reinforcements such as fibers and particles. The major advantage of hybrid composites is able to control the material properties such as optical, electrical, and mechanical properties. For this reason, hybrid composites are widely used in automotive, marine, household, and electrical industries. The objective of this work was to investigate processing characteristics in the compression molding of hybrid thermoplastic composites. The mechanical properties of composites manufactured in various forming conditions were monitored. The composites contained randomly oriented long carbon fiber and carbon black in polypropylene(PP) matrix were used. The carbon fiber contents of composites were 5%, 10%, 15%, and 20%, and carbon black contents were 5%, 10%, 15%, 20%, and 25% by weight. Compression molding was conducted at various mold temperatures. Crstallinity was also measured by using X-RD. The tensile modulus of the composites increased with increasing the mold temperature. However, the impact strength of the composites decreased as the mold temperature increased.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1993년도 ACT 93
• /
• pp.661-666
• /
• 1993