• Korean Journal of Acupuncture
• /
• 제20권4호
• /
• pp.1-16
• /
• 2003

Objectives : This study was examined for effects of acupuncture of Hyeong points' Acupuncture of Three Foot-eum Collaterals on the abdominal thermography of health subject. Methods : The volunteers who participating in this study had taken rest for 20 - 30 minutes in room temperature $(23-25^{\circ}C)$ before the examination and informed them what to prohibit smoking, drinking and administration of drug for the previous day. The thermography of abdomen including a below part of the chest was taken using Infra-Red Imaging System (IR 2000, MEDI-CORE Co., Korea) by time interval of 15 minutes at 15 minutes before, just before and 15 minutes after, 30 minutes after and 45 minutes after acupuncture stimulation. Acupuncture was applied to the left Hyeong points' Acupuncture of Three Foot-eum Collaterals for 30 minutes. Results : The results showed that acupuncture of Hyeong points had more potencies of changes on all the ROIs of abdominal thermography than those of control group. Also, it was observed that the quantities of thermal changes following acupuncture of Hyeong points been increased comparing that of control group at all the ROIs (region of interest). Observed the thermography classified by ROI, however, it was failed that acupuncture of Hyeong points could modulate the specific areas concerning to the abdominal pathway of Three Foot-eum Collaterals. Conclusions : These results suggest that acupuncture of Hyeong points may modulate thermal distributions and changes of abdominal areas including the below of chest.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.192-196
• /
• 2005

Key part of main equipment in a gas turbine may be likely to be damaged due to operation under high temperature, high pressure, high-speed rotation, etc. Accordingly, the cost for maintenance increases and the damaged parts may cause generation to stop. The number of parts for maintenance also increases, but diagnostics technology fur the maintenance actually does not catch up with the demand. Blades are made of precipitation hardening Ni superalloy IN738 and the like for keeping hot strength. The surface of a blade is thermal-sprayed, using powder with main compositions such as Ni, Cr, Al, etc. in order to inhibit hot oxidation. Conventional regular maintenance of the coating layer of a blade is made by FPI (Fluorescent Penetrant Inspection) and MTP (Magnetic Particle Testing). Such methods, however, are complicated and take long time and also require much cost. In this study, defect diagnostics were tested for the coating layer of an industrial gas turbine blade, using an infraredthermography camera. Since the infrared thermography method can check a temperature distribution on a wide range of area by means of non-contact, it can advantageously save expenses and time as compared to conventional test methods. For the infrared thermography method, however, thermo-load must be applied onto a tested specimen and it is difficult to quantify the measured data. To solve the problems, this essay includes description about producing a specimen of a gas turbine blade (bucket), applying thermo-load onto the produced specimen, photographing thermography images by an infrared thermography camera, analyzing the thermography images, and pre-testing for analyzing defects on the coating layer of the gas turbine blade.

• 비파괴검사학회지
• /
• 제30권2호
• /
• pp.121-125
• /
• 2010

회전기기의 결함진단에 있어서 기존의 방법과 달리 적외선열화상기술은 회전기기의 결함진단에 대해 비접촉, 비파괴 및 상태감시 모니터링을 할 수 있다. 본 논문에서는 적외선열화상 상태진단을 기반으로 하는 회전기기의 결함진단에 대한 새로운 접근법을 제안한다. 따라서 회전기에서 가장 많이 사용되어지는 볼베어링을 이용하여 실험을 수행하였고, 진동 스펙트럼 분석과 적외선열화상을 이용하여 실시간 모니터링을 수행하였다. 적외선열화상기법을 이용하여 볼베어링의 윤활 불균형에 따른 온도 특성을 확인할 수 있었다. 이러한 실험을 통한 결과를 분석 검토하여 향후 산업전반의 회전기기의 상태감시연구에 있어서 다양한 분야에 사용되어 질 것으로 예상된다.

• Archives of Plastic Surgery
• /
• 제48권5호
• /
• pp.553-558
• /
• 2021

The diagnosis of the main complications resulting from lipoabdominoplasty has not yet been standardized. Infrared thermal imaging has been used to assess possible complications, such as necrosis and changes in micro- and macro-circulation, based on perforator mapping techniques, among others. The objective of this study was to present two clinical cases involving thermal imaging monitoring of the healing process of lipoabdominoplasty in the immediate postoperative evaluation and its preliminary results. Infrared thermography was performed 24 hours after the operation and on postoperative days 5, 25, and 27. In clinical case 1, it was found that the delta-R (∆T_R)-defined as the difference in minimum temperature between the highest and lowest points in the SA3 region (caution suction area) following the classification established by Matarasso-was 0.4℃ at 24 hours after surgery and decreased to 0.1℃ on a postoperative day 5. There were no complications in this case. In contrast, in clinical case 2, the ∆T_R was 1.7℃ at 24 hours after surgery (upon hospital discharge) and remained high, at 2.2℃, on postoperative day 5. A higher ∆T_R was found in the second patient, who developed necrosis of the surgical wound. The ∆T_R thermal index may be a new tool for predicting possible complications, complementing the clinical evaluation and therapeutic decision-making.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.377-378
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.273-274
• /
• 2007

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.823-824
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.835-836
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.615-616
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.525-526
• /
• 2009