• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.04a
• /
• pp.11-15
• /
• 1995

Polysulfone (PS) membranes were prepared by the phase inversion process using water or isopropanol as nonsolvent. The Flory-Huggins theory for a ternary system nonsolvent/solvent/polymer is applied to describe the thermodynamic equilibria of the components. The calculated ternary phase equilibria show that demixing of a PS binary solution with n-methylpyrrolidone (NMP) will be fast in a water coagulation bath and will be delayed in an isopropanol bath. The prepared membranes were characterized by SEM, gas adsorption-desorption measurement, and permeability test. The membrane, which is precipitated by fast demixing in a water bath, has nodular structures in the skin region and includes finger-like cavities in the sublayer. The membrane coagulated by isopropanol has a very dense and thick skin structure, which is formed by delayed demixing. The membrane coagulated by isopropanol showed considerably lower pore volume and surface area compared to that observed with water coagulation method. With dimethylformamide (DMF) as solvent and 2-3 wt% of water, the solution can show the liquid-liquid phase separation due to agglomation of the polymer-lean phase from the homogeneous solution. The membranes, which were coagulated near an equilibrium state, show the large (micron size) round pores in the whole membranes. The pores do not contribute the permeation characteristics.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.3
• /
• pp.547-556
• /
• 2000

A study have been conducted for the adsorption and desorption characteristics of Cu ion using manganese nodule as adsorbent. For 100 ppm Cu ion solution, the adsorbed amount of Cu ion was more than 90 % at equilibrium state. Adsorption was equilibrated in 42 hours the adsorption reaction was shown to be first order reaction. For the desorption reaction of Cu ion in the region of solution pH 3.5~9.5, the desorption was completed in the acidic region, but it has been decreased as the pH was raised. Also, the desorption rate was higher in the acidic region compared with alkaline region. The desorbed amount was decreased as the reaction temperature increased, therefore, the desorption reaction was thought to be exothermic. Also, several thermodynamic properties were calculated based on experimental results and compared with theoretically driven values. To see the effect of complexing agent on the desorption of Cu ion, EDTA was introduced and the des orbed amount increased in the presence of EDTA.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.7
• /
• pp.1213-1223
• /
• 2000

The adsorption characteristics of phenol has been studied by using CDQ (Cokes Drying Quenching) dust as an adsorbent. The adsorption capacity of CDQ dust was shown to be 42% about removal for 300 ppm phenol solution at the equilibrium adsorption time of 60 min. Removal percentage of phenol increased as the initial phenol concentration was raised in the experimental conditions and the adsorption behavior was explained well by Freundlich adsorption isotherm. Kinetic study showed that the adsorption followed 1st, 1.5th, and 2nd-order rate equation in the sequence as the adsorption time passed. Since the adsorption amount of phenol was increased as the adsorption temperature was raised, the adsorption was thought to be endothermic, and several thermodynamic parameters have been calculated based upon experimental data. Adsorbed amount of phenol on CDQ dust changed little according to the variation in the solution pH except for the slight decrease under the strong alkaline condition.

• The Journal of Engineering Geology
• /
• v.12 no.2
• /
• pp.203-214
• /
• 2002

The statistical model was introduced to satisfy various experimental condition on the sorption of heavy metals (Pb, Cu, Cd, and Zn) by bentonite. The Box-Behnken model designed statistically was applied to determine relative impact among three variables such as pH, HCO$_3$ contents and heavy metal concentrations on the sorption. The SAS program was used to obtain the statistical solution. The statistical surface response analysis indicates that initial concentration of heavy metals and pH have an important effect on the sorption, and bicarbonate is not a serious variable. The sorption capability about heavy metals of bentonite is in the order of Pb>Cu>Zn>Cd. The precipitation as hydroxyl and carbonate complexes of heavy metals was thermodynamically analyzed as major mechanism of sorption under alkaline pHs and high bicarbonate solution. It was found that there is a little difference between the model prediction on the precipitation of heavy metals and the results of batch sorption experiment. The thermodynamic data of the programs have to revise to obtain the best fit condition between the model prediction and the experimental results.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.4
• /
• pp.239-247
• /
• 2021

BACKGROUND: Enormous amounts of the wood biomass wastes have been produced through various wood processing. This study characterizes the surface characteristics of biomass powders of Cornus controversa (CC) and Quercus mongolica (QM) and investigates their removal efficiency and mechanism for Pb (II) in aqueous solution on which to base potential recycling alternative of the wood biomass. METHODS AND RESULTS: Batch experiments were conducted under different conditions of Pb concentrations, temperatures, time and solid/solution ratios. Adsorption isotherm of Pb by CC and QM biomass was explained significantly by the Langmuir model, indicating Pb was likely adsorbed on the monolayer of the surfaces. The adsorption kinetics were fitted significantly to the double first-order model consisting of rapid and slow steps. The respective rate constants (k1) of CC and QM for the rapid adsorption kinetic steps were 0.051 and 0.177 min^-1, and most of the sorption reactions proceeded rapidly within 6-20 minutes. The maximum adsorption quantities (q_max) of Pb were 17.25 and 23.47 mg/g for CC and QM, respectively. Thermodynamic parameters revealed that adsorption of Pb on the biomass of CC and QM was a spontaneous endothermic reaction. CONCLUSION(S): Results demonstrate that biomass wastes of CC and QM can be used as Pb adsorbents judging from adsorption isotherm, kinetics, and thermodynamic parameters.

• Archives of Pharmacal Research
• /
• v.7 no.1
• /
• pp.47-52
• /
• 1984

Four polymorphic forms (I, II, III and IV) of hydrochlorothiazide have been characterized on the basis of x-ray diffractometry and differential thermal analysis. Form I was obtained by crystallization from N, N-dimethylformamide and Form II was crystallized from hot methanol. Form III was precipitated from sodium hydroxide aqueous solution by treatment with hydrochloric acid and Form IV was crystallized from 50% methanol. The metastable form I was a most stable form among four polymorphs, which was stable more than ten months at room temperature. The thermodynamic parameters such as heat of solution, enthalpy, entropy, free energy difference and transition temperature were determined by the measurement of intrinsic dissolution rate. The transition temperature and the heat of transition between the metastable Form I an Form II were determined to be $299.15^{\circ}$K and 5.03 Kcal/mole, respectively and free energy difference ($\delta$ F) was 302. 13 cal/mole. Diuretic action of these four polymorphic forms was also evaluated by monitoring the difference in urinary excretion of sodium, potassium and magnesium in rats.

• Journal of the Korean Chemical Society
• /
• v.56 no.2
• /
• pp.264-273
• /
• 2012

Five derivatives of phenylthiourea namely: 1-(4-methoxyphenyl)-3-phenylthiourea (1), 1-(4-methylphenyl)-3- phenylthiourea (2), 1-(4-bromophenyl)-3-phenylthiourea (3), 1-(4-chlorophenyl)-3-phenylthiourea (4) and 1-phenylthiourea (5) have been evaluated as new inhibitors for the corrosion of carbon steel in 2 M HCl solution using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques. Potentiodynamic polarization measurements showed that these derivatives are mixed-type inhibitors. The inhibition efficiency was found to increase with inhibitor concentration and decreases with rise in temperature. The thermodynamic parameters of adsorption and activation were determined and discussed. Nyquist plots showed depressed semicircles with their centre below real axis. The adsorption process of studied derivatives on carbon steel surface obeys Temkin adsorption isotherm. The synergistic effect of these derivatives and some anions is discussed from the viewpoint of adsorption models. The electrochemical results are in good agreement with the calculated quantum chemical HOMO and LUMO energies of the tested molecules.

• Applied Biological Chemistry
• /
• v.2
• /
• pp.9-14
• /
• 1961

The formation of sulfide from sulfate has been discussed from the thermodynamic principles. No mechanism of the reaction has been presented. From the stoichiometric and Nernst equations for the conversion of sulfate into sulfide, it was concluded that the formation of sulfide from sulfate can take place more readily if pH of a medium is low. The difficulty of this conversion increases with increasing pH. As pH of a medium increases, the degree of dissociation of H₂S into S= increases and this, in turn, renders the chance of precipitation of sulfide as FeS easier. Higher the pH of a soil or medium, greater is the S= concentration. The concentration of ferrous ion required to remove dissolved sulfide in a medium by forming insoluble FeS decreases with increasing pH. From the theory it was pointed out that an application of lime and iron rich foreign substances to a soil may be effective in causing the removal of dissolved sulfide from solution.

• Journal of Electrochemical Science and Technology
• /
• v.8 no.3
• /
• pp.244-249
• /
• 2017

This paper presents the results of an investigation into the isoamperic point of cyclic voltammograms, which is defined as the singular point where the voltammograms of various scan rates converge. The origin of the unique point is first considered from a theoretical perspective by formulating the voltammetric curves as a system of linear equations, the solution of which indicates that a trivial solution is only available at the potential at which the net current is zero during the reverse potential scan. In addition, by way of a mathematical formulation, it was also shown that the isoamperic point is dependent on the switching potential of the potential scanning. To validate these findings, theoretical and practical cyclic voltammmograms were studied using finite-element based digital simulations and 3-electrode cell experiments. The new understanding of the nature of the isoamperic point provides an opportunity to measure the charge transfer effects without the influence of the mass transfer effects when determining the thermodynamic and kinetic characteristics of a faradaic system.

• Computers and Concrete
• /
• v.4 no.2
• /
• pp.101-117
• /
• 2007

A new model predicting the nonlinear basic creep behaviour of concrete structures subjected to high multi-axial stresses is proposed. It combines a model based on the thermodynamic framework of the elasto-plastic continuum damage theory for time-independent material behaviour and a rheological model describing phenomenologically the long-term delayed deformation. Strength increase due to ageing is regarded. The general 3D solution for the creep theory is derived from a rate-type form of the uniaxial formulation by the assumption of associated creep flow and a theorem of energy equivalence. The model is able to reproduce linear primary creep as well as secondary and tertiary creep stages under high compressive stresses. For concrete in tension a simple viscoelastic formulation is applied. The material law is then incorporated into a finite element solution procedure for analysis of reinforced concrete structures. Numerical examples of uniaxial creep tests and concrete members show excellent agreement with experimental results.