• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.962-971
• /
• 2004

This paper has dealt with thermo-physical properties of microencapsulated phase change material slurry as a latent heat storage material having a low melting point. The measured results of the thermo-physical properties of the test microencapsulated phase change material slurry, those are, density, specific heat, thermal conductivity and viscosity, were discussed for the temperature region of solid and liquid phases of the dispersion material (paraffin). The measurements of these properties of microencapsulated phase change material slurry have been carried out by using a specific-gravity meter, a water calorimeter, a differential scanning calorimeter(DSC), a transient hot wire method and rotating type viscometer, respectively. It was clarified that the additional properties law could be applied to the estimation of the density and specific heat of microencapsulated phase change material slurry and also the Euckens equation could be applied to the estimation of the thermal conductivity of this slurry.

• Advanced Composite Materials
• /
• 제18권2호
• /
• pp.153-166
• /
• 2009

A matrix method for evaluating effective electro-magneto-thermo-elastic properties of a generally anisotropic multilayered composite is presented. Physical variables are categorized into two groups: one that satisfies the continuity across the interface between layers and another that satisfies an average inter-layer compatibility (which is also exact). The coupled electro-magneto-thermo-elastic constitutive equation is accordingly reassembled into submatrices, which leads to the derivation of concise and exact matrix expressions for effective properties of a multilayered composite having the coupled physical effects. Comparing the results for a purely elastic multiplayer with those from other theoretical approaches validates the developed method. Examples are given for a PZT-graphite/epoxy composite and a $BaTiO_3-CoFe_2O_4$ multiplayer which exhibit piezo-thermoelastic and magnetoelectric properties, respectively. The result shows how a strong magnetoelectric effect can be achieved by combining piezoelectric and piezomagnetic materials in a multilayered structure. The magnetoelectric coefficient of the $BaTiO_3-CoFe_2O_4$ multiplayer is compared with those for fibrous and particulate composites fabricated with the same constituents.

• Carbon letters
• /
• 제7권2호
• /
• pp.87-96
• /
• 2006

This paper describes the physical properties of filled Nylon6 composites resin with nano-sized carbon black particle and graphite nanofibers prepared by melt extrusion method. In improving adhesions between resin and fillers, the surface of the carbon filler materials were chemically modified by thermo-oxidative treatments and followed by treatments of silane coupling agent. Crystallization temperature and rate of crystallization increased with increases in filler concentration which would act as nuclei for crystallization. The silane treatments on the filler materials showed effect of reduction in crystallization temperature, possibly from enhancement in wetting property of the surface of the filler materials. Percolation transition phenomenon at which the volume resistivity was sharply decreased was observed above 9 wt% of carbon black and above 6 wt% of graphite nanofiber. The graphite nanofibers contributed to more effectively in an increase in electrical conductivity than carbon black did, on the other hand, the silane coupling agent negatively affected to the electrical conductivity due to the insulating property of the silane. Positive temperature coefficient (PTC) phenomenon, was observed as usual in other composites, that is, temperature increase results conductivity increase. The dispersity of the fillers were excellently approached by melt extrusion of co-rotational twin screw type and it could be illustrated by X-ray diffraction and SEM.

• 한국산학기술학회논문지
• /
• 제21권1호
• /
• pp.717-724
• /
• 2020

일반적으로 아스팔트 포장체의 열전달에 영향을 미치는 인자는 크게 날씨와 포장체의 재료로 나뉘며, 그 중 포장체의 재료 요인으로는 열-물리적 인자(Thermophysical properties)과 포장체 표면의 인자(Surface property)으로 나뉜다. 본 연구에서는 포장체 전반적인 파손 모형에 기본이 되는 아스팔트의 열-물리적 인자에 대한 실험을 진행하였으며, 평가한 아스팔트의 열전달 특성 인자로는 열전도도(Thermal Conductivity), 비열용량(Specific Heat Capacity), 열확산특성(Thermal Diffusivity), 열방사률(Thermal Emissivity)를 평가하였다. 샘플로 사용한 표층용 혼합물 입도는 밀입도 포장 WC-2와 배수성 포장 PA-13으로 선회다짐기를 이용하여 제작하였다. WC-2와 PA-13의 실험결과로 열전도도는 1.18W/m·K과 0.9W/m·K로 나타났고, 비열용량은 970.8J/kg·K과 960.1J/kg·K으로 공극률이 더 낮은 혼합물인 WC-2가 혼합된 재료의 량이 많아 비열용량이 더 높은 나타나는 것을 알 수 있었다. 또한 열방사률은 0.9와 0.91, 열확산률은 5.15㎡/s와 4.66㎡/s으로 WC-2가 PA-13 대비 약 10% 더 빠른 열 확산을 보이는 것을 알 수 있다. 이러한 결과는 향후 아스팔트 포장의 열에너지 활용 및 열에너지에 의한 아스팔트 포장의 파손평가 및 모형개발 등에 연구 및 활용에 가장 근간이 되는 자료가 될 것이라 판단되다.

• 한국식품저장유통학회지
• /
• 제10권2호
• /
• pp.125-130
• /
• 2003

본 연구에서는 냉동처리한 김치의 동결에 따른 물리적 특성을 조사하고 적정 동결시간을 예측하기 위한 모델을 개발하였다. 김치의 동결 전후의 밀도를 부피에 대한 중량의 비로 산정한 결과 김치의 밀도는 1001.9$\pm$0.03 kg/㎥(동결전), 987.0$\pm$0.07 kg/㎥(동결후)이었고 김치의 체적팽창은 4.67%(-15$^{\circ}C$)이었다. 김치의 빙결점은 양념액에서 -2.5$^{\circ}C$, 고형분은 -4.$0^{\circ}C$로 측정되었다. 김치의 빙결율은 -5.$0^{\circ}C$일 때 약 50%이상, -1$0^{\circ}C$일 때 약 75% 이상, -$25^{\circ}C$일 때 약 90% 수준이었다 시료의 초기온도( $X_1$), 시료의 두께( $X_2$)와 시료의 초기빙결점에서 동결매체 온도사이의 차의 역수( $X_3$) 및 표면열전달계수의 역수( $X_4$)를 독립변수로 하고 동결시간(Y)을 종속변수로 설정하여 다중회귀 분석을 실시한 결과, $Y_{kimchi}$=3.856 $X_1$+13982.8 $X_2$+8305.166 $X_3$+ 3559.181 $X_4$-639.189($R^2$=0.9632)의 방정식을 구하였다. 이 식은 기존의 모델에 비해 측정치와 예측치가 비교적 유사한 것으로 나타났으며, 평균 절도오차도 10% 수준이었다.

• 한국세라믹학회지
• /
• 제49권4호
• /
• pp.385-396
• /
• 2012

Thermal shock test methods and thermal shock parameters for ceramics were reviewed from the following viewpoints: (1) The test methods should be based on the precise estimation of both temperature and thermal stress distributions in a specimen taking into account the temperature-dependent thermo-mechanical properties; (2) The thermal shock parameters must be defined as a physical property of the materials and described as a function of temperature at the fracture point of the specimen; (3) The relation between the strength and fracture toughness of brittle ceramics under a thermal shock load must be the same as the relation under a mechanical load. In addition, appropriate thermal shock parameters should be defined by the thermal shock strength and thermal shock fracture toughness based on stress and energy criteria, respectively. A constant heat flux method is introduced as a testing technique suitable for estimating these thermal shock parameters directly from the electric power charged.

• 한국지열·수열에너지학회논문집
• /
• 제15권2호
• /
• pp.1-9
• /
• 2019

In a ground-source heat pump (GSHP) system, a vertical ground heat exchanger (GHE) is widely accepted due to a higher thermal performance. In the vertical GHE, grout (also called grouting material) plays an important role in the heat transfer performance and the initial installation cost of the GHE. Bentonite-based grout has been used in practice because of its high swelling potential and low hydraulic conductivity. This study evaluated the thermo-physical properties of the bentonite-based grouts through lab-scale measurements. In addition, we conducted performance simulation to analyze the effect of mixed ratio of grouts on the design length and thermal performance of the vertical GHE. The simulation results show that thermally-enhanced grouts improve the heat transfer performance of the vertical GHE and thus reduce the design length of GHE pipe.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1448-1453
• /
• 2004

The major parameters governing the fluid dynamical and thermo-dynamical behavior in the large pipeline network system are friction loss and the pipeline length. But in local pipeline networks and relatively short distance pipeline system, secondary loss and the considerations of the moving states of the fluid machine are also important. One of the major element in local pressure control system is pressure regulator. It causes the variations of the physical properties in that pipeline system. Especially, as there is not enough information to obtain reliable physical property values such as density, temperature etc. at the downstream of the pressure regulator, It is hard to calculate accurate solution in the pipeline network analysis. In this study, some numerical approaches to investigate the critical-flow-characteristics of the pressure regulator have been done and the detail examinations and considerations of the pressure regulator as a pipeline network elements according to the variations of the inlet-outlet pressure ratio have been carried. Finally the flow-flied distributions, relations and critical-flow-characteristics have been studied. in detail and the 1D analytic method to analyze critical pipe flow have been investigated

• KIEAE Journal
• /
• 제15권1호
• /
• pp.53-60
• /
• 2015

Increase in energy consumption in building is a big concern world over. In Nepal, energy crisis is a big issue but energy demand in buildings is barely even thought about. In the southern part of Nepal, where the weather is mostly hot during the year, cooling in buildings is very important. This is an initial study regarding building design strategies which focuses on cooling energy consumption in the building. It can be seen from the study that simple passive strategies can be applied in building design which can support in decreasing cooling load. Different passive cooling strategies like orientation, building size, thermal mass, window design and two direct cooling strategies have been investigated in this study. Direct cooling strategies like shading and natural cooling helps in passive cooling. Different desing strategies have different impact on the cooling energy requirement and the study shows that thermo physical property of building materials has the maximum effect on the energy consumption of the building. Each design strategy creates and average of 20% decrease in energy consumption, whereas the thermal conductivity can have as much as 10 times more effect on the energy consumption than other design strategies.

• 한국표면공학회지
• /
• 제54권6호
• /
• pp.331-339
• /
• 2021

Environmental barrier coatings(EBCs) are applied to the SiC/SiC ceramic matrix composites(CMCs) in order to protect CMCs from being corroded with water vapor by combustion gas in gas turbine engines. Ytterbium silicates, such as ytterbium monosilicate and ytterbium disilicate, are ones of the candidate materials for EBCs due to their excellent resistance to water vapor corrosion as well as thermal-expansion match with SiC. In this study, ytterbium silicates are fabricated with 2-step solid-state synthesis targeting ytterbium disilicate. After synthesizing ytterbium monosilicate, the mixtures of ytterbium monosilicate and SiO₂ are heat-treated and densified by using pressureless sintering or hot pressing with a variety of heating conditions. The phase formation, thermal expansion, and oxidation behavior are examined with fabricated specimens. The final densified bodies are found to be composites between ytterbium monosilicate and ytterbium disilicate with different ratios, which results in 4.43 to 6.72×10^-6/K range of coefficients of thermal expansion. The probability of these ytterbium silicates for EBC applications is also discussed.