• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.956-961
• /
• 2000

This paper describes the design of a small size Alkali Metal Thermal to Electric Converter (AMTEC) which employs a capillary structure for recirculating sodium working fluid. The cycle is based on the simple and small capillary type ${\beta}"$ -alumina and wick tube element. The proposed cell consists of the 37 conversion elements with capillary tube of $50{\mu}m$ in diameter and the sealed cylindrical vessel of 22mm in outer diameter. Results on the cycle analysis of sodium flow and heat transfer in the cell showed that the expected power output was 4.65W and the conversion efficiency was 19% for the source temperature of 900K.

• 마이크로전자및패키징학회지
• /
• 제15권1호
• /
• pp.7-18
• /
• 2008

This paper reviews the current development of an ultra-slim SiP for Radio Frequency (RF) application, in which three flip chips, additional passive components and Surface Acoustic Wave (SAW) filters are integrated side-by-side. A systematic investigation is carried out for the design optimization, process and reliability improvement of the package, which comprises several aspects: a design study based on the 3D thermo-mechanical finite element analysis of the packaging, the determination of stress, warpage distribution, critical failure zones, and the figuration of the effects of material properties, process conditions on the reliability of package. The optimized material sets for manufacturing process were determined which can reduce the number of testing samples from 75 to 2. In addition the molded underfilling (MUF) process is proposed which not only saves one manufacturing process, but also improves the thermo-mechanical performance of the package compared with conventional epoxy underfilling process. In the end, JEDEC's moisture sensitivity test, thermal cycle test and pressure cooker tests have also been carried out for reliability evaluation. The test results show that the optimized ultra-slim SiP has a good reliability performance.

• 한국추진공학회지
• /
• 제20권6호
• /
• pp.46-53
• /
• 2016

희박 예혼합 가스터빈의 연소 불안정 현상을 이해하기 위해서는, 선형 과정에 의하여 얻어지는 고유주파수 및 초기 성장률뿐만 아니라, 연소기 비선형 특성에 의존하는 한계진폭의 예측이 필요하다. 특히 현재의 연구에서는 비선형 거동에 의한 한계 진폭을 예측하기 위해서 유동 섭동과 열발생의 비율이 주파수와 속도 진폭을 정의할 수 있는 화염묘사함수를 적용하였다. 본 연구에서는 화염묘사함수를 얻기 위하여 CFD 기법이 적용되었으며, 이를 통하여 비선형 열음향 해석으로부터 불안정 한계 진폭을 예측할 수 있었다.

• 한국추진공학회지
• /
• 제21권1호
• /
• pp.8-16
• /
• 2017

고체 추진기관이 노즐마개에 의해 외기와의 교환이 완벽히 차단된다면, 구조적 안정성은 제작초기 조건인 내부조성간의 잔류반응(Post Cure, Migration etc.), 그리고 자유공간 내의 산소(또는 산화방지제)와 습기(제습제)와의 반응에 종속된다. 이로부터 발생하는 혼합형 고체추진제의 기계적 특성은 매우 복잡하며, 추진기관은 발사직전까지 일교차/년교차의 끊임없는 열하중을 받게 된다. 본 연구에서는 고체 추진기관의 제조공정인 성형오븐에서 출고 후 저장안정화까지의 거동을 고체추진제의 열유변학적 단순특성을 적용하여 신속하게 산출할 수 있는 방법을 제시하였다. 이를 위해 온도제어 가능한 Endurance Test 장치를 고안 제작하였으며, 추가적으로 점진적 응력과 변형율 증가에 따른 비선형 특성도 검토한다.

• 한국강구조학회 논문집
• /
• 제18권3호
• /
• pp.395-403
• /
• 2006

최근 건설되는 강교량은 지간의 장대화 및 교량으로서의 기능은 물론이고 외적 조형미, 유지관리, 공사기간과 수명주기 비용 등을고려한 구조적 단순함을 요한다. 이러한 요구를 충족시키기 위해 극후판이나 TMCP 강과 같은 고성능 강의 사용이 요구된다. TMCP (Thermo-Mechanical Control Proces)법에 의해 제조되는 TMCP 강은 탄소당량이 적고, 조직이 미세하며, 강도 및 인성이 좋다. 최근에는 인장강도 60MPa급의 고강도 TMCP 강인 SM570-TMC 강이 개발되어 토목구조물에 일부 적용되고 있으며, 점차 그 영역을 확장하려는 추세에 있다. 하지만 이러한 고강도 TMCP 강을 강구조물에 적용하기 위해서는 그 재료적 특성뿐만 아니라 용접 시 발생하는 접합부의 역학적 특징을 명확히 할 필요가 있다. 따라서 본 연구에서는 고온인장실험을 통해서 SM570-TMC 강의 고온시의 기 계적 특성을 조사하였고, 이를 잔류응력 특징을 명확히 하였다.

• 한국기계가공학회지
• /
• 제20권12호
• /
• pp.113-122
• /
• 2021

Complicated residual stress distributions occur in the vicinity of a deposited region via directed energy deposition (DED) process owing to the rapid heating and cooling cycle of the deposited region and the substrate. The residual stress can cause defects and premature failure in the vicinity of the deposited region. Several heat treatment technologies have been extensively researched and applied on the part deposited by the DED process to relieve the residual stress. The aim of this study was to investigate the residual stress characteristics of a specimen fabricated by DED and a quenching process using thermomechanical analyses. A coupled thermomechanical analysis technique was adopted to predict the residual stress distribution in the vicinity of the deposited region subsequent to the quenching step. The results of the finite element (FE) analyses for the deposition and the cooling measures show that the residual stress in the vicinity of the deposited region significantly increases after the completion of the elastic recovery. The results of the FE analyses for the heating and quenching stages further indicate that the residual stress in the vicinity of the deposited region remarkably increases at the initial stage of quenching. In addition, it is observed that the residual stress for quenching is lesser than that after the elastic recovery, irrespective of the deposited material.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.7-12
• /
• 2000

The automatic turbine startup system provides turbine control based on thermal stress. During the startup, control system monitors and evaluates main components of turbine using damage mechanism and life assessment. In case of valve chest, the temperature of inner/outer wall is measured by thermo-couples and the safety of these values are evaluated by using allowable ${\Delta}T$ limit curve during the startup. Because allowable ${\Delta}T$ limit curve includes life assessment, it is possible to apply this curve to turbine control system. In this paper, low cycle fatigue damage and combined rupture and low cycle fatigue damage criterion proposed for yielding the allowable ${\Delta}T$ limit curve of CV(control valve) chest. To calculate low cycle fatigue damage, the stress analysis of valve chest has peformed using FEM. Automatic turbine startup to assure service life of CV was achieved using allowable ${\Delta}T$ limit curve.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.242-242
• /
• 2007

To verify the applicability of High Temperature Superconducting (HTS) cable system into the real grid, the HTS cable system with the specification of 22.9 kV, 1250 A, 100 m long was installed in the second quarter of 2006, and the long term field test has been in progress at the KEPCO's Gochang power testing yard. Apart from the conventional power cable, HTS cable system requires sufficient thermo-mechanical strength to endure a large temperature difference. To date, the KEPCO HTS cable system was cooled down and warmed to the room temperature several times to investigate the influence of thermal cycles experimentally. Dielectric properties, critical current dependance and heat losses were evaluated at each step of thermal cycle. The test results showed that thermal cycle did not induce the degradation of dielectric properties, and the critical current decreased to 5 % of the initial value.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.703-707
• /
• 2001

A performance analysis of a SOFC/MGT hybrid system has been carried out for concept design. Thermo-dynamic models for each component being able to describe electrochemical characteristics and heat and mate-rial balance are proposed. Estimated is the power capacity of a SOFC suitable for the hybrid operation with a 5kW class MGT. Effects of current density and operating pressure are also investigated. Electric efficiency showed weak dependence on operating pressure and current density. It is desirable that the SOFC operates at high current density in manufacturing cost's point of view though operating with high current density slightly decreases the electric efficiency find specific power.

• 동력기계공학회지
• /
• 제15권6호
• /
• pp.5-10
• /
• 2011

A turbocharger is subjected to rapid temperature changes during thermal cyclic loads. In order to predict the thermo-mechanical failures, it's very important to estimate temperature distributions under the thermal shock test. This paper suggest the finite element techniques with the temperature histories, a constitutive material model and the mechanical constraints to calculate the thermal stresses and plastic strain distributions for the turbine housing. The first step was to develop a simple coupon approach to represent the failure mechanism of the classical design shapes and secondly applied the actual turbocharger to predict and validate the weak locations under the physical engine test.