• Journal of the KSME
• /
• v.24 no.4
• /
• pp.275-283
• /
• 1984

유한요소기법은 원만한 온도변화를 갖는 이동경계문제에 대해 적용할 수 있음을 설명하였다. 상변화가 일어나는 요소에서 어느 한 시간 단계에 변화할 수 있는 온도의 범위는 상변화 온도 구간 보다 적어야 원만한 수치해를 얻을 수 있음을 소개하였다. 잠열의 효과를 엔탈피의 온도에 대한 변화율로 처리하여 열용량 행렬을 계산할 수 있음을 설명하였다. 급격한 변화를 갖는 온 도분포를 수치적으로 근사해를 구할 때 나타나는 파동형상은 연속적인 변수를 부분적으로 근사 해를 가정 하는데서 포함되는 오차에 기인한다. 따라서 이러한 급격한 변화의 변수를 취급하는 기법이 요구된다. 상변화를 수반하는 이동경계문제는 물의 결빙금속의 열처리, 용접, 고체연료의 연소 등에서 많이 접하게 되나 전문적인 프로그램이 없으므로(저자가 조사한 바에 의하면) 온 도분포를 요구하는 문제에서는 이의 선결이 요망되고 있다. 특히 구조해석문제에서 시간에 따라 온도조건이 변화는 경우가 많아 온도분포에 대해 따로 계산하고 그 후 구조해석을 하는 방법이 있으나, 이는 상변화와 같은 물성의 큰 변화가 없는 경우에만 가능하다. 따라서 상변화가 있는 문제에서 열탄성(thermo-elasticity)이나 열탄소성(thermoelasto-plasticity)해석을 하기 위해서는 이동경계와 구조해석을 동시에 하여야 한다.

• International Journal of Automotive Technology
• /
• v.7 no.1
• /
• pp.61-68
• /
• 2006

In design of the friction clutches of automobiles, knowledge on the thermo-elasticity a priori is very informative in the initial design stage. Especially, the precise prediction technique of maximum temperature and stress should be requested in design of mechanical clutches for their durability and compactness. In this study, an efficient and reliable analysis technique for the design of the mechanical clutches by using computer modeling and numerical method was developed. A commercial software STAR-$CD^{TM}$ was used to find the convective heat-transfer coefficients. MSC/$NASTRAN^{TM}$ software was followed to predict the temperature of clutch with utilization of estimated coefficients. Some experiments were also performed with a dynamometer to verify the procedure and calibrate the thermal load. As a conclusion, a design procedure, including numerical steps and experimental techniques for calibration, was proposed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.8
• /
• pp.1451-1457
• /
• 1992

In hot strip rolling, the thickness of strip cannot be retained uniform by several irregular parameters. It has been shown that the load distribution can affect only a small fraction of the excess strip crown, whereas the thermal effects of working roll are the major reason on large changes in the strip center crown during hot rolling. In this study, the temperature distribution of working roll is represented by fourier series expansion. The analytical solution of the resulting thermo-elasticity problem is obtained by love's strain function. The results which are compared with those of the finite element method show good agreements.

• Coupled systems mechanics
• /
• v.8 no.3
• /
• pp.247-257
• /
• 2019

Fee vibrational characteristics of porous steel double-coupled nanoplate system in thermo-elastic medium is studied via a refined plate model. Different pore dispersions called uniform, symmetric and asymmetric have been defined. Nonlocal strain gradient theory (NSGT) containing two scale parameters has been adopted to stablish size-dependent modeling of the system. Hamilton's principle has been adopted to stablish the governing equations. Obtained results from Galerkin's method are verified with those provided in the literature. The effects of nonlocal parameter, strain gradient, foundation parameters, porosity distributions and porosity coefficient on vibration frequencies of metal foam nanoscale plates have been examined.

• Advances in nano research
• /
• v.16 no.5
• /
• pp.489-500
• /
• 2024

This paper studies the free vibration analysis of the piezo-magneto-thermo-elastic FG nanobeam submerged in a fluid environment. The problem governed by the partial differential equations is determined by refined higher-order State Space Strain Gradient Theory (SSSGT). Hamilton's principle is applied to discretize the differential equation and transform it into a coupled Euler-Lagrange equation. Furthermore, the equations are solved analytically using Navier's solution technique to form stiffness, damping, and mass matrices. Also, the effects of nonlocal ceramic and metal parts over various parameters such as temperature, Magnetic potential and electric voltage on the free vibration are interpreted graphically. A comparison with existing published findings is performed to showcase the precision of the results.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.10a
• /
• pp.211-216
• /
• 1994

This study dealt with the properties for fly ash of conbined heat power plant and application for concrete industry. For this purpose, fly ash sampled Ulsan conbined heat power plant and analyzed for physical and chemical properties. As analyzed results of fly ash, contents of $SiO_ and Al_O_ $in the fly ash of Ulsan were less than those of Thermo-electric power plant(Boryuing), but contents of CaO were tem times as much as those of Boryung, because of these differences, it is expected that pozzolanic activity of concrete using fly ash of Ulsan will be different from another fly ash. Concrete specimens were tested to evaluate concrete preformance when 10 to 50 percent of the portland cement by weight in the concrete mix was replaced with fly ash of conbined heat power plant. As test results, workability and consideration in the fresh concrete were increased and concrete strength was showed more than 400kg/$\textrm{cm}^2$ for the required age. This study would be provided valuable data for the practical utilization of fly ash(conbined heat power plant). In the future, properties of fly ash concrete including long term strength, elapsed time, pozzolanic activity, modulus of elasticity, sulfate resistance, shrinkage, freeze-thaw durability and so on will be studied.

• Structural Engineering and Mechanics
• /
• v.77 no.6
• /
• pp.819-830
• /
• 2021

To evaluate the performance of concrete load bearing walls in a structure under horizontal loads after being exposed to real fire, two steps were followed. In the first step, an experimental study was performed on the thermo-mechanical properties of concrete after heating to temperatures of 200-1000℃ with the purpose of determining the residual mechanical properties after cooling. The temperature was increased in line with natural fire curve in an electric furnace. The peak temperature was maintained for a period of 1.5 hour and then allowed to cool gradually in air at room temperature. All specimens were made from calcareous aggregate to be used for determining the residual properties: compressive strength, static and dynamic elasticity modulus by means of UPV test, including the mass loss. The concrete residual compressive strength and elastic modulus values were compared with those calculated from Eurocode and other analytical models from other studies, and were found to be satisfactory. In the second step, experimental analysis results were then implemented into structural numerical analysis to predict the post-fire load-bearing capacity response of the walls under vertical and horizontal loads. The parameters considered in this analysis were the effective height, the thickness of the wall, various support conditions and the residual strength of concrete. The results indicate that fire damage does not significantly affect the lateral capacity and stiffness of reinforced walls for temperature fires up to 400℃.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.77-83
• /
• 2018

Thermoplastic elastomers are being used increasingly throughout industry owing to their superior properties, such as superior elasticity, formability, and recoverability. Currently, research related to thermoplastic elastomers is focused on the development of composite elastomers by combining with various materials and the development of equipment. On the other hand, in the field of small and medium sized companies, it is necessary to study not only the application of these new materials, but also the process conditions that enable the extrusion of thermoplastic elastomers in inexpensive uniaxial screwing equipment. If extrusion is performed in a single screw extruder, it is important to maintain a uniform thickness through process control of the extruder. This study examined the effects of the processing temperature, which is an extrusion process variable, on the formability of a tube in the thermoplastic elastomer TPE-800L uniaxial extrusion process. The nozzle zone temperature is the most important factor in the extrusion of thermoplastic elastomer TPE-800L; the most excellent moldability was confirmed at $165-170^{\circ}C$.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.4
• /
• pp.35-45
• /
• 2002

The stresses of the underfill/chip interface due to thermal loading was studied using the finite element method. At first, the effective properties of underfill for several volume fractions of silica particles were calculated by Mori-Tanaka method for three different material sets, and the parameters of singularity for the bimaterial edge and the bimaterial wedge were calculated. Consequently, the stresses at the underfill/chip interface with volume fraction of silica particles were investigated. Five different geometric models of flip-chip assembly involving two kinds of bimaterial strips and three kinds of three-layer models were considered under the assumption that the underfill is homogeneous. It was assumed that all components of the flip-chip assembly were linear elastic and isotropic, and their properties were temperature independent. The analysis was conducted in the context of the uncoupled plane thermo-elasticity under a plane strain assumption.

• Resources Recycling
• /
• v.4 no.1
• /
• pp.4-11
• /
• 1995

The amounts of waste stone and stone powder sludge that occurred in the quarry and processing plant of s stone plates, have been increased with the development of stone industry. The manufactunng process of 따tificial s stone was studied to reduce the outlet of these wastes and utilIze them as raw materials for architecture, interior decoration and art work. In order to compare the properties of artiflcial stone with those of natural building-stone, the physi$\alpha$II properties of artificial stone such as specific gravity, absorption ratio, elastic wave velocity, compressive s strength, tensile strength, shore hardness, elasticity and Poission's ratio were measured. From the mesaured d data of physical properties, it was found that physical propertIes of artificial stone were controlled by homogeneous m mixing ratio of constituents, molding pressure, and amount of binder. Also, from the thermo-gravimetric analysis, it was found that artIfIcial stone manufactured had a good thermal stability up to $300^{\circ}C$. It was concluded that t the optimum conditions for manufacturing process of artificial stone were $200kg/\textrm{cm}^2$ of molding pressure, 12-15 w weight % of binder amounts.