• 태양에너지
• /
• 제16권2호
• /
• pp.65-77
• /
• 1996

동적형 빙축열 시스템의 빙축열조에서 세가지 얼음충진율에 대해 분산유체의 유온, 유량을 변화시켜 용융실험을 행하였다. 빙축열조에 분산되는 분산유체의 온도가 높고 유량이 많을수록 빙축열조 내의 온도성층화 현상도 뚜렸하였고 온도성층화에 돌입하는 시간이 단축되었다. 분산유체의 유량이 많을 때는 잠열이 방출되는 시기에 걸쳐서 빙축열조 내의 온도안정화 현상이 나타나고 온도안정화에 소요되는 시간도 단축되었다. 그러나 얼음의 용융이 끝난 후는 유량이 적을 때가 온도성층화 현상이 뚜렸하였다. 빙축열조 얼음충진율이 높을 때 온도성층화에 소요되는 시간이 길었으며 빙축열조 내 온도분포는 안정되었고 빙축열조의 벽면 영향으로 인해 빙축열조 상부의 온도가 높게 나왔다. 실험초기온도를 유지하는 기간은 빙축열조 내의 얼음이 존재하는 기간과 일치하였다. 빙축열조 내의 평균온도 상승은 분산유체의 유량이 많고 온도가 높을수록 일찍 상승하였다. 총방열에너지에 대한 잠열에너지($E/E_{ot}$)의 시간에 대한 변화비는 분산유체의 온도가 동일한 조건에서 유량이 많을수록, 분산유체의 온도가 높을수록 큰 값으로 나타났다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(2)
• /
• pp.29-35
• /
• 1996

For the Reactor Coolant System(RCS) flow rate measurement by the secondary calorimetric heat balance method, the coolant temperature of the hot leg is needed. Several Resistance Temperature Detectors(RTD) are installed in the hot leg to measure the temperature, but the average value of RTDs does not correctly represent the energy-averaged(bulk) temperature because of the thermal stratification phenomenon. Therefore some correction is introduced to predict the bulk temperature, but the correction inevitably contains uncertainty because the stratification is not defined well quantitatively yet. Therefore a large uncertainty for the correction has been used for the conservative estimation. But unrealistically large uncertainty causes degradation of the measurement method and yields difficulty to meet the acceptance criterion in start-up flow measurement test. In this paper, an analytical estimation is made on the correction and the related uncertainty using the measured hot leg velocity profile of System 80 reactor flow model test and the measured temperatures of YGN 3&4 and PVNGS 1&2 start-up tests. The results reveal that the magnitude of the correction uncertainty is much smaller than that used in the previous design. Therefore, the confidence on the flow rate measurement method can be improved and the difficulty in start-up flow measurement test can be lessened if the smaller correction uncertainty obtained through this estimation is applied.

• 대한설비공학회지:설비저널
• /
• 제17권4호
• /
• pp.382-394
• /
• 1988

Dynamic characteristics of thermally-forced stratification process in a square enclosure with a linear temperature profile at the side walls have been investigated through flow visualization experiment and numerical analysis. The experiment was performed on air with the Rayleigh numbers of order $10^5$. A particle tracer method is used for the flow visualization and to obtain a sudden linear temperature profile at the side walls copper blocks which already have a linear temperature profile are come into contact with the thin copper plates of the test section. Immediately a meridional circulation is developed and heat transfer takes place from the wall to the interior region by circulation of fluid and finally a thermal stratification is achieved. In the numerical study, QUICK scheme for convective terms, SIMPLE algorithm for pressure correction, and the implicit method for the time marching are adopted for the integration of conservation equations. Comparison of flow visualization and numerical results shows that the developing flow patterns are very similar in dynamic nature even though there is a time lag due to the inevitable time delay in setting up a linear temperature profile. For high Rayleigh numbers, the oscillatory motion is likely to take place and stratified region is extended. However, initial temperature adjustment process is much slower than that for low Rayleigh numbers.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 추계학술발표회요약집
• /
• pp.178-178
• /
• 2002

• 설비공학논문집
• /
• 제27권4호
• /
• pp.213-219
• /
• 2015

A thermal storage tank with internal heat exchange coils is commonly used in solar thermal systems with a collector area below $100m^2$. The coils are installed in the lower part of the tank because the temperature of the upper part of the tank can drop if the outlet temperature of the collector becomes lower than the upper temperature of the tank, which is a kind of temperature reversal. As an alternative to the well-mixed storage tank with lower coil only, we have proposed a tank with lower and upper coils and have achieved superior thermal stratification in the tank, which results in increased collector efficiency and solar fraction. But, the phenomenon of temperature reversal was often observed in the tank when the load or solar radiation changed rapidly. In the present work, revised control was successfully applied, i.e., to heat only the lower coil using a three way valve if temperature reversal occurs and to operate the collector at a low flow rate when the quality of solar radiation is not good.

• 설비공학논문집
• /
• 제7권1호
• /
• pp.42-51
• /
• 1995

In order to establish a theoretical basis for the analyses of transient behaviors in stratified thermal storage tanks, analytical approaches to an improved one-dimensional model are made. In the present model the storage tank is treated as a finite region with an adiabatic tank exit, whereas it has been considered as a simple semi-infinite region previously. Application of the Laplace transformation and the Inversion theorem to the governing equations makes it possible to obtain an exact infinite-series solution, which is convergent only at sufficiently large time. Accordingly a complementary solution which is available for short times, i.e., the time range of this study is sought by an approximate method. The approximate solution which is rigorously validated through the examination of neglected terms in the solution procedure agrees quite well with the exact one. Moreover, it is simpler to use and more convenient to interpret the physical meaning of the solution. Comparison of the present solution with the previous ones shows relatively large difference near the tank bottom, which results from the more realistic boundary condition adopted in the present model. Some representative results by the approximate solution including effects of the Peclet number on temperature distrbutions are illustrated to show the utility of this study. In consequence, it is expected that the present results based on the improved model replace the foregoing ones as a new theoretical reference for studies of thermal stratification fields.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1996년도 학술발표회
• /
• pp.24-29
• /
• 1996

The objective of this research is to study on the formations of thermal stratification in a room in case of several furniture fires such as trashcan, chair, carpet, sofa, mattress and wardrobe as a fire starter in a residential room by performing the experimental studies. The uniformly distributed fire in case of carpet showed that the ignition and the initial growth period were relatively short while the fully developed period was considerably long. The concentrated fires such as the mattress and wardrobe showed that the ignitions and the initial growth periods were relatively long. When fire spread to only one direction, like the case for the trashcan with a regular shape, there was one peak of temperature profile, and for the irregular shaped furniture such as chair, sofa, mattress and wardrobe, there were two or more peaks. The interface heights for the furniture fires were around 1(m) mataining constant state. However, at the time of the maximum temperature, the interface height was lowered to 0.25(m)-0.75(m) from the floor

• Journal of the korean society of oceanography
• /
• 제32권1호
• /
• pp.38-45
• /
• 1997

To find out the changes in vertical distribution patterns over the 24-h period, a key and the first step to tackle the problem of adaptive significance of diel vertical migration (DVM), vertically stratified time series samplings with multiple opening/closing plankton samplers were done in the East Sea of Korea (Sea of Japan). Sampling was done almost every 4 h for one day period following the same water parcel in Nov. 1995 and May 1996, respectively. Resultant patterns of vertical distribution showed that some species such as most abundant taxa Metridia pacifica and Scolecithyicella minor, both Copepoda, performed DVM even in the study area of strong thermal stratification. Their patterns of DVM such as distance scales and timing of movements were not the same each other, and they were separated from other taxa in the dendrogram obtained by the cluster analyses, Most minor taxa grouped in one, however, seemed not to do DVM in the study area of strong thermal stratification. They usually preferred the warmer surface layer where the foods were probably more abundant.

• 설비공학논문집
• /
• 제26권7호
• /
• pp.322-328
• /
• 2014

Return piping is used in a solar combi-system for heating and hot water supply. When the temperature of the lower side of a storage tank is low due to hot water usage, the returned hot water after heating is mixed with the lower side cold water of the tank, and the useful energy is reduced. We studied the degree of thermal stratification in the tank, using either a diffuser or a manifold to prevent mixing. Using the diffuser, mixing starts from the bottom of the storage tank. On the other hand, the manifold has the marked effect of preventing mixing. As a result of experiments with changing the diameter and number of holes in the manifold, the optimum condition is 8.5 mm diameter and 96 holes, under the condition of 0.3 lpm.

• 대한조선학회논문집
• /
• 제42권3호
• /
• pp.183-189
• /
• 2005

A modeling of a hydraulic-gun-aerator is proposed to set up a design procedure for such devices. The aerators are used to destroy any thermal stratification that are responsible for the degradation of water qualify of lakes. The aerator produces ascending flow by using air bubbies released instantly near the bottom of the lake into a cylindrical pipe installed vertically. Differently form the diffuser-aerators, they can pull up the cold, oxygen depleted water directly to the region of the free surface, and they are believed to work effectively especially for relatively deeper lakes. Their design procedure has not been established yet though, and we propose a model focusing on the exit flow velocity at the top of the aerator through the examination of presently operating devices.