• 에너지공학
• /
• 제28권3호
• /
• pp.65-79
• /
• 2019

본 연구는 산업단지 내 Gas Combined Cycle CHP와 연계 가능한 신재생에너지원을 조합하여 최적의 설비용량을 산정하고자 하였다. 특히 2013~2016년도 에너지사용계획 협의 대상 산업단지 중 집단에너지 공급대상 지역지정 연료사용량 요건은 연간 3.8만 TOE로 미달되지만, 열밀도가 $92.6Gcal/km^2{\cdot}h$로 높은 세종첨단일반산업단지를 연구 대상으로 하였다. 그리고 신재생에너지 Hybrid System 경제성 분석 프로그램인 HOMER Pro를 이용하여 연료전지와 태양광발전을 연계한 FC-PV Hybrid CHP System의 최적화 운영 모델에 대해 분석하였다. 또 CHP의 주 공급 에너지원인 열에너지에 있어, 열수요량 뿐만 아니라 우점 업종에 대한 열수요 패턴을 분석하여 연구의 신뢰도를 높이고자 하였으며, 경제성 분석을 추가하여 상대적 편익을 비교하고자 하였다. 연구 결과, 신규 조성 중인 세종첨단일반산업단지의 전체 간접열 수요는 연간 378,282 Gcal이며, 이중 제지업종이 연간 293,754 Gcal인 약 77.7%를 우점하고 있었다. 산업단지 전체 간접열 수요에 대해 단일 Combined Cycle CHP의 최적 설비용량은 30,000 kW로, 이때 열생산은 CHP가 275,707 Gcal, 72.8 %를 분담하고, 첨두부하보일러 PLB가 103,240 Gcal, 27.2 %를 분담하는 것으로 분석되었다. 그리고 CHP와 연료전지, 태양광 조합에서는 최적 설비용량이 각 30,000 kW, 5,000 kW, 1,980 kW이며, 이때 열생산은 Combined Cycle CHP가 275,940 Gcal, 72.8%, 연료전지가 12,390 Gcal, 3.3%, PLB가 90,620 Gcal, 23.9%를 분담하였다. 여기서 CHP 용량이 감소하지 않은 것은, CHP 용량 감소에 따른 부족한 열 생산량에 대해 PLB의 과다한 운전이 요구되는 경제적이지 못한 대안이 도출되었기 때문이었다. 한편 우점 업종인 제지업종의 간접열 수요에 대해서는 Combined Cycle CHP, 연료전지, 태양광 조합의 최적 설비용량은 25,000 kW, 5,000 kW, 2,000 kW로, 이때 열생산은 CHP 225,053 Gcal, 76.5%, 연료전지 11,215 Gcal, 3.8%, PLB가 58,012 Gcal, 19.7%를 분담하는 것으로 분석되었다. 그러나, 현행 전력시장 및 가스시장에서의 경제성 분석결과는 모두 투자비 회수가 불가능한 것으로 확인 되었다. 다만, 우점 업종인 제지 업종만을 대상으로 CHP와 연료전지, 태양광을 조합한 CHP Hybrid System이 단일 CHP System에 대해 연간 약 93억원의 경영여건을 개선시킬 수 있음을 확인하였다.

• 전기학회논문지
• /
• 제60권6호
• /
• pp.1274-1279
• /
• 2011

The purpose of this paper is to present the manufacturing defect and damage pattern of a 3 phase 22.9/3.3kV oil immersed transformer, as well as to present an objective basis for the prevention of a similar accident and to secure data for the settlement of PL related disputes. It was found that in order to prevent the occurrence of accidents to transformers, insulating oil analysis, thermal image measurement, and corona discharge diagnosis, etc., were performed by establishing relevant regulation. The result of analysis performed on the external appearance of a transformer to which an accident occurred, the internal insulation resistance and protection system, etc., showed that most of the analysis items were judged to be acceptable. However, it was found that the insulation characteristics between the primary winding and the enclosure, those between the ground and the secondary winding, and those between the primary and secondary windings were inappropriate due to an insulating oil leak caused by damage to the pressure relief valve. From the analysis of the acidity values measured over the past 5 years, it is thought that an increase in carbon dioxide (CO2) caused an increase in the temperature inside the transformer and the increase in the ethylene gas increased the possibility of ignition. Even though 17 years have passed since the transformer was installed, it was found that the system's design, manufacture, maintenance and management have been performed well and the insulating paper was in good condition, and that there was no trace of public access or vandalism. However, in the case of transformers to which accidents have occurred, a melted area between the upper and the intermediate bobbins of the W-phase secondary winding as well as between its intermediate and lower bobbins. It can be seen that a V-pattern was formed at the carbonized area of the transformer and that the depth of the carbonization is deeper at the upper side than the lower side. In addition, it was found that physical bending and deformation occurred inside the secondary winding due to non-uniform pressure while performing transformer winding work. Therefore, since it is obvious that the accident occurred due to a manufacturing defect (winding work defect), it is thought that the manufacturer of the transformer is responsible for the accident and that it is lawful for the manufacture to investigate and prove the concrete cause of the accident according to the Product Liability Law (PLL).

• 한국산학기술학회논문지
• /
• 제18권5호
• /
• pp.716-722
• /
• 2017

본 연구에서는 Fire Dynamics Simulation (FDS)를 이용하여 화재 기류 전파 경로 상에 플랜트 설비 유무가 공간 내 열유동 특성에 미치는 영향을 알아보기 위해 화원 위치에 따른 지하 복합 발전 플랜트 내 화재 해석을 수행하였다. 화원의 크기는 10 MW이며, 화원 상부의 장애물(설비)의 유무에 따라 화원 위치가 천장 및 화원 상부에서의 열 기류 선단의 전파 특성을 미치는 영향을 정량적으로 비교분석하였다. 결과로서, 화원 상부에 장애물이 있을 경우, 화재 기류가 화원 상부 천장에 도달하는 시간이 장애물이 없을 때에 비해 약 5 배가량 증가하였다. 화원 상부 천장 벽면의 천장 기류 시작 지점으로부터 거리에 따른 각 지점에서 열 기류 선단의 전파 시간의 평균적으로 장애물이 없는 경우에 비해 약 70% 가량 증가하였으며, 특히 10 m 지점에서는 4 배 가까이 증가하였다. 이는 장애물이 화원으로부터 발생하는 수직 열기류의 흐름을 방해하고, 장애물 뒤 쪽에 불안정한 후류가 형성되었기 때문이다. 따라서 지하복합 발전 플랜트 내 피난 및 재난 관리의 초기 대응 목적의 화재 감지 설비 시스템 설계 시 화재 시나리오에 따른 열유동 분석이 중요할 것으로 판단된다.

• 스마트미디어저널
• /
• 제12권10호
• /
• pp.63-70
• /
• 2023

최근 스마트팜 에너지 비용 중 35% 낸난방비 에너지 소비가 증가되어 에너지 소비 효율화가 요구되며, 전기료 현실화에 대한 우려로 신재생 에너지 중요성이 증가하고 있다. 신재생 에너지는 수력, 풍력, 태양광 등에 속하며, 이중 태양광 에너지는 전기에너지로 변환하는 발전기술로, 이 기술은 에너지원이 환경에 미치는 영향이 적고, 유지 보수가 간편하다는 특징을 갖고 있다. 본 연구에서는 온실 축열조, 히트펌프 데이터 기반으로 축열조 영향을 많이 미치는 요소를 선정하고 축열조 공급 온도예측 모델을 개발하고자 한다. 시계열 데이터 분석 및 예측에 효과적인 LSTM(Long Short-Term Memory)과 다른 앙상블 학습 기법보다 뛰어난 XGBoost 모델을 이용하여 예측한다. 히트펌프 축열조 온도를 예측함으로써 에너지 소비를 최적화하여 시스템 운영을 최적화할 수 있다. 또한, 태양광 활용에 따른 냉난방비 절감 및 농가의 에너지 자립도 개선 등 스마트팜 에너지 통합 운영 시스템에 연계하고자 한다. 플랫폼을 통해 폐열 에너지의 공급을 관리하고 최대 난방부하 및 계절, 시간별 작물생장에 필요한 에너지값을 도출하여 이를 기반으로 최적 에너지 운용방안을 도출하고자 한다.

• 설비공학논문집
• /
• 제14권12호
• /
• pp.1102-1139
• /
• 2002

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2000 and 2001 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD technologies were widely applied for developing facilities and their systems. (2) Most of papers related with heat transfer analysis and heat exchanger shows dealt with convection, evaporation, and channel flow for the design application of heat exchanger. The numerical heat transfer simulation studies have been peformed and reported to show heat transfer characteristics. Experimental as well as numerical studies on heat exchanger were reported, while not many papers are available for the system analysis including heat exchanger. (3) A review of the recent studies on heat pump system shows that performance analysis and control of heat pump have been peformed by various simulations and experiments. The research papers on multi-type heat pump system increased significantly. The studies on heat pipe have been examined experimently for change of working characteristics and strut lure. Research on the phase change has been carried out steadily and operation strategies of encapsulated ice storage tank are reported experimentally in several papers. (4) A review of recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. Evaporation and condensation heat transfer characteristics are investigated for tube shapes and new alternative refrigerants. Studies on components of refrigeration/air conditioning system are carried to examine efficiency for various compressors and performance of new expansion devices. In addition to thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out, however research works on two-phase flow seemed to be insufficient. (5) A review of the recent studies on absorption cooling system indicates that heat and mass transfer phenomena have been investigated to improve absorber performance. Various experimental data have been presented and several simulation models have been proposed. A review of the recent studies on duct and ventilation shows that ventilation indices have been proposed to quantify the ventilation performance in buildings and tunnels. Main efforts have been focused on the applications of ventilation effectiveness in practice, either numerically using computational fluid dynamics or experimentally using tracer gas techniques. (6) Based on a review of recent studies on indoor thermal environment and building service systems, research issues have mainly focused on many innovative ideas such as underfloor air-conditioning system, personal environmental modules, radiant floor cooling and etc. Also, the new approaches for minimizing energy consumption as well as improving indoor environmental conditions through predictive control of HVAC systems, various activities of building energy management and cost-benefit analysis for economic evaluation were highlighted.

• 한국산업보건학회지
• /
• 제21권3호
• /
• pp.139-145
• /
• 2011

Objectives: This investigation is purposed to evaluate the airborne asbestos concentrations in the public buildings having asbestos containing materials(ACMs) in Seoul. Methods: The Seoul Metropolitan Government carried out an asbestos survey to the city-owned public buildings to identify the level of risk exposure, classified into low, moderate and high risk. To evaluate the airborne concentration of asbestos, 11 sampling sites in ten buildings based on the survey were selected. The air samples from the eleven sites were analyzed by Phase Contrast Microscopy(PCM) and Transmission Electron Microscopy (TEM), and compared the analytical results from the both. Results: 1. The airborne fiber concentrations by PCM were less than the detection limit($7f/mm^2$) in 9(82%) out of 11 sampling sites. The highest concentration was 0.0043 f/cc, but it was below the guideline value for indoor air quality(0.01 f/cc), proposed by the Ministry of Environment, Korea. 2. In two sampling sites, having moderate risk level, the chrysotile was identified and showed it's concentrations of 0.0102 s/cc and 0.0058 s/cc, less than $5{\mu}m$ lengths. 3. The ACMs identified in the two sampling sites were a packing material(65% of chrysotile) in mechanical area and a thermal system insulation(5% of chrysotile) in a boiler room. Having more possibility of asbestos emission in the mechanical area, it would be required to set up and carry out the asbestos management plan. Conclusions: Based on the result of this study, the airborne asbestos concentrations in the public buildings with ACMs were generally lower than the guideline value for indoor air quality. There are widespread concerns about the possible health risk resulting from the presence of airborne asbestos fibers in the public buildings. Most of the previous studies about airborne asbestos analysis in Korea were performed based on PCM method that asbestos and non-asbestos fibers are counted together. In the public and commercial buildings, having ACMs, it is suggested that the asbestos be analyzed by TEM method to identify asbestos due to concerns about asbestos exposure to workers and unspecified people.

• 콘크리트학회논문집
• /
• 제19권2호
• /
• pp.189-197
• /
• 2007

터널 라이닝은 대형 화재 등과 같은 고온에 노출될 경우, 폭렬이 발생하고 이로 인해 급격한 온도 전달 및 내력 저하로 구조체 붕괴의 원인이 될 수 있다는 것이 여러 사례를 통해 보고되고 있다. 본 연구는 터널라이닝의 내화뿜칠 재료로 매우 적합할 것으로 판단되는 고인성 고내화성 시멘트 복합체(FR-ECC)를 개발하고 이의 역학적 특성 및 내화 성능을 평가하고자 하였다. 이를 위하여 FR-ECC에 있어서의 배합 요인을 실험 변수로 내화 시험을 실시하였으며 비정상 온도 분포 해석 기법(nonlinear transient heat flow analysis)을 이용하여 이를 해석적으로 묘사 검증되었다. 또한, 실험 결과를 통해 검증된 해석 기법을 이용하여 터널라이닝에 대한 열전달 해석을 수행하여 FR-ECC를 내화 2차 라이닝재로 이용하는 경우의 거동 특성을 분석하였다. 실험 결과 내화 성능을 향상시키기 위한 FR-ECC의 최적 배합은 PVA 섬유 또는 PP 섬유 혼입률 $V_f=2.0%$, 다공성 세라믹재 혼입률 $V_C=3.6%$, 공기량 $V_A=15%$로 나타났으며, 검증된 비정상 온도 분포 해석 기법을 이용하여 기존 터널에 40mm FR-ECC를 추가 라이닝 한 경우에 대한 해석 결과, 콘크리트 및 철근의 온도 분포가 모두 $350^{\circ}C$ 이내에서 제어되어 터널 내 콘크리트 및 철근에 대한 화재 피해를 방지할 수 있을 것으로 판단되었다.

• Journal of Preventive Medicine and Public Health
• /
• 제22권1호
• /
• pp.136-145
• /
• 1989

This study made a descriptive analysis of the cumulative amount and rate of sports medical care utilization during the 24th Seoul Olympic Games by the participating athletes, officials, etc. The sports medical care utilization was a component of the total medical care use and was basically caused by the prevention and treatment of sports injuries. The analytic data were derived from the Olympic Health Management Information System(OHMIS) of the SLOOC and the Korea Athlete Trainer Association(KATA). These were analyzed according to the quantity of physician visits and the utilization rate, which was the amount of utilization divided by the total number of participating persons. The results were as follows: Firstly, the sports medical care utilization by the persons participating in the Seoul Olympics amounted to 17.9% of the total medical care utilization. The venue medical services utilization accounted for 54.7% of the total physician visits, which was larger than the village medical center's utilization. The number of physician visits per hundred persons during the 2 week period in the venue clinic was 3.03 and that of the village medical center was 2.51, therefore, the total was 5.54. Secondly, athletes accounted for 82.3% and officials 12.2% in the sports medical care utilization by participants. These results were because athletes, who were directly related to the games, called extremely often on the physicians. The utilization rate of sports medical care by athletes was 34.29. Thirdly, the sports medical demand according to type of therapy could be ranked from high to low in the following order: sports massage, thermal therapy, and electrical stimulation treatment, etc. The department of physical therapy in the village medical center was used a great deal. Fourthly, the trend of daily sports medical care utilization by the athletes showed a bell shape centering around the opening day of the Seoul Olympic Games. The utilization rate of athletes was 2.3; however, that of officials was 0.6. Lastly, the sports medical demand was calculated according to the continents, and Central America, Africa and Middle-East Asia proved to have a higher rate of sports medical care utilization than the more powerful and industrialized continent or regions.

• 한국환경보건학회지
• /
• 제3권1호
• /
• pp.27-44
• /
• 1976

This study was carried out to evaluate the harmful factors in working environments and to investigate the labor productivity after improvement of environments, surveying 93 industrial establishments of 10 industries located in Youngdeungpo industrial area in Seoul. The results obtained were as follows: 1) The highest noise level of 125dB(A) was indicated at the rolling process of transport equipment manufacturing industry. 2) The best illumination level was shown in precise machinery industry and the worst was indicated in rubber products, metallic products and transport equipment manufacturing industries. 3) Thermal conditions were above threshold limit value (TLV) at more than two processes of all industries except printing industry. 4) The highest dust concentration was determined in textile and wearing manufacturing industry. 5) Organic solvents were detected at 52 processes in 93 industrial establishments and 33 processes of them showed higher than TLV. The results about harmful chemicals were as follows: a) sulfur dioxide ($SO_2$)was determined higher than TLV on welding process of metallic product manufacturing industry and heat treatment process of transport equipment manufacturing industry. b) Carbon monoxide (CO) concentration was 700ppm at heat treatment process of transport equipment manufacturing industry, indicating 14 times of TLV. c) vinylchloride concentration in the air of PVC raw material mixing process and PVC preparation process of chemical product manufacturing industry was determined higher than TLV. d) Hydrochloride (HCl) concentration in the air of wire expanding process of transport equipment manufacturing industry was determined higher than TLV. 7) Higher values of lead concentration than TLV were determined at lead welding metallic product manufacturing industry and type planting process of process of printing industry, $1.8mg/m^3$ and $0.3mg/m^3$ respectively. 9) 22, 968 of 52, 855 workers (i.e. 43.5%) in 93 industries were exposed to various harmful agents. 10) It was found that the improvement of illumination in electric apparatus manufacturing industry (from 20~40 lux to 420 lux) resulted in an increase in productivity of 6.5% per capita and a decrease in faulty products of 19%. 11) Improvement of environments using local exhaust ventilation system resulted in a decrease of harmful substances lower than TLV and an increase in productivity of 11.4%. 12) Improvement of shovelling tools based on ergonomics resulted in a reduction in energy expenditure of 25.3% and an increase in productivity of 32.2% per capita.

• 방사성폐기물학회지
• /
• 제10권1호
• /
• pp.63-75
• /
• 2012

사용후핵연료 심지층처분장 부지선정과 최종 처분장부지의 처분적합성을 평가하는 업무는 시행-착오를 줄이고 기술적 신뢰성 확보와 합리적이고 효율적인 업무수행을 추구하여야 한다. 이에 선행하여, 우리나라에 적용 가능한 처분장부지의 지질환경 요건 설정을 위한 기본방향과 개별 인자의 처분적합성지표를 가능한 한 정량화하여 설정하고 업무에 적용하여야 한다. 사용후핵연료 처분장부지 선정과 최종처분장 부지의 안전성확보를 위한 처분요건과 관련하여 IAEA 및 OECD 회원국들과 처분연구 및 상용사업 수행 관련 선진국가들의 사례를 바탕으로 요건 별로 구분하여 현황을 분석하였다. 여기서는 사용후핵연료 처분장 부지로서 암석 암반이 갖추어야 할 충분 혹은 선호요건에 대한 이해 제고와 관련 세부 기술지침을 도출하는데 기여하고자 하였다. 이를 토대로 어떠한 암석 암반이 상대적으로 보다 유리한 조건을 가지는 선호요건으로 제시해야 하는지, 그리고 충분요건과 선호요건을 적용하여 후보부지 조사 선별평가 기간 동안 부지선정업무에 반영하고 평가하고 결정하여야 하는 방법론을 도출할 수 있도록 기본 골격을 제시하였다. 또한 처분안전성 확보를 위해 필요한 기본적인 사항을 검토하고 서술하였다. 본 논문에서 기술한 항목들은 처분안전성 확보를 위한 처분요건의 기술지침 구성 체계, 처분안전성 확보개념, 다중방벽 기능 조건, 천연방벽의 지질환경 기본요건, 그리고 우리나라에 적용 가능한 처분장부지 지질환경 기본요건(안) 등으로 구성된다. 우리나라의 사용후핵연료 심지층처분장 부지의 위치에 관한 사업자 기술지침 요건으로 제안하였다. 이와 관련하여 충분요건과 선호요건으로, 화산활동, 지진활동, 단층운동 융기 침강 운동 및 기후 해수면변동 등 장기지질안정성 요건을 비롯한 15개 충분요건과 48개 선호요건을 제안하였다. 이들 요건은 우리나라의 지질환경 특성을 충분히 반영하여 후속되는 각 부문별 특성에 적합한 정량적인 기술 기준 및 지침으로 개발되어야 할 것이다. 정량적 기술지침의 도출은 상용 처분장부지 선별평가과정 및 처분장 부지적합성평가 과정으로부터 확립될 수 있을 것이다. 또한 다양한 부문별 안전사례(safety case) 작성 혹은 연구용 지하처분연구시설 (underground research laboratory: URL)을 이용한 처분시스템의 실증과정 등을 통하여 객관적이고 신뢰성있는 정량적인 지침들이 확립될 수 있을 것이다.