• 한국생활과학회지
• /
• 제7권1호
• /
• pp.183-195
• /
• 1998

The purpose of this study is to investigate the effect of Ondol on the bedclimate, microclimate and physiological responses of occupants. Four healthy female subjects slept for seven hours in thermal environment of detached house and apartment respectively. Their bedclimate, microclimate, skin temperature, weight loss of body, weight of bedcloth and sleepwear, body movement and subjective sensation were measureed for this study. The results were as follows; The differences of bedclimate, microclimate, skin temperature were significant according to season and residence styles. The occupants of the detached house showed higher temperature and humidity inside quilt and clothes than those of the apartment did on apartment environment. The occupants of the detached house showed higher weight losses of body, heavier weights of quilt than those of the apartment did on apartment environment in the spring, autumn and winter, lower weight losses of mattress in the autumn and winter. The occupants of the detached house moved more than those of the apartment on apartment environment when sleeping. The occupants of the detached house felt higher thermal sensation and lower humidity sensation than those of the apartment did. The occupants of the detached house felt more comfortable than those of the apartment on detached house environment, while the occupants of the apartment felt more comfortable than those of the detached house on apartment environment. The thermal environments of the apartment and the detached house had an effect on the bedclimates, microclimates of occupants and therefore the physiological responses such as skin temperature, rectal temperature, weight loss of body, perspiration and subjective sensation are different during sleeping according to their residential styles on the same environment.

• 에너지공학
• /
• 제12권1호
• /
• pp.35-41
• /
• 2003

본 연구에서는 배가스의 현열회수를 통해 연소기기의 열효율을 향상시키는 축열연소시스템에서 구형축열체를 이용한 축열기내 열유동을 해석할 수 있는 수치해석 코드를 개발하였다. 이를 통해 축열기내 비정상 열유동을 해석하고 축열기 길이를 포함한 축열기 형상과 축열체 구경에 따른 배열회수와 압력손실의 관계를 파악해 보았다. 수치해석은 1차원 2상 유체역학 모델을 도입하여 MacCormack방식으로 해를 얻었으며, 실험적 경향과 일치함을 알 수 있었다. 개발된 수치코드를 통해 얻은 결론은 축열기 길이가 길고 입자구경이 작으며 축열기내 유체 유속이 빠른 경우에 많은 배열을 회수할 수 있으나 압력손실이 커짐을 알 수 있었다.

• 융합신호처리학회논문지
• /
• 제3권3호
• /
• pp.76-81
• /
• 2002

대전력 전동기 구동장시스템에서 하드 스위칭 토폴로지는 심각한 스위칭 손실과 EMI잡음문제를 일으키며, 인버터 스위칭 주파수는 과도한 손실과 열적문제 때문에 제한되게 된다. 본 연구의 목적은 개선된 소프트 스위칭 토폴로지에 의해 스위칭손실과 EMI를 저감할 수 있는 대용량 교류전동기의 구동에 적합한 시스템을 개발하고자하며, 시뮬레이션과 실험을 통하여 그 타당성을 입증하였다.

• Journal of Electrical Engineering and Technology
• /
• 제6권4호
• /
• pp.527-534
• /
• 2011

In the present paper, the characteristics of Mega-Flux$^{(R)}$, JNEX-Core$^{(R)}$, amorphous and ferrite cores are compared to the inductor of buck-boost converters for Hybrid Electric Vehicles. Core losses are analyzed at the condition of 10 kHz sine wave excitations, and permeability fluctuations vs. temperature and magnetizing force will be analyzed and discussed. Under the specifications of the buck-boost converter for 20 kW THS-II, the power inductor will be designed with Mega-Flux$^{(R)}$ and JNEX-Core$^{(R)}$, and informative simulation results will be provided with respect to dc bias characteristics, core and copper losses.

• 한국연소학회지
• /
• 제12권2호
• /
• pp.34-41
• /
• 2007

The dynamic behaviors of counterflow non-premixed flame have been investigated experimentally to study effects of heat losses and Lewis number on edge flame oscillation, which result from the advancing and retreating edge flame motion of outer flame edge at low strain rate flame. For low strain rate flame, lateral conduction heat loss in addition to radiation heat loss could be more remarkable than the others. Oscillatory instabilities appear at fuel Lewis number greater than unity. But excessive lateral conduction heat loss causes edge flame instability even at fuel Lewis number less than unity. The excessive heat loss caused by the smaller burner diameter in which the flame length is an indicator of lateral conduction heat loss extends the region of flame oscillation and accelerates oscillatory instability in comparison to the previous study with the burner diameter of 26mm. Extinction behaviors quite different from the previous study are also addressed.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2007년도 제34회 KOSCO SYMPOSIUM 논문집
• /
• pp.145-152
• /
• 2007

The dynamic behaviors of counterflow non-premixed flame have been investigated experimentally to study effects of heat losses on edge flame oscillation, which result from the advancing and retreating edge flame motion of outer flame edge at low strain rate flame. For low strain rate flame, lateral conduction heat loss in addition to radiation heat loss could be more remarkable than the others. Oscillatory instabilities appear at fuel Lewis number greater than unity. But excessive lateral conduction heat loss causes edge flame instability even at fuel Lewis number less than unity. The dramatic change of burner diameters in which flame length is an indicator of lateral conduction heat loss was applied to examine the onset condition of edge flame oscillation and flame oscillation modes. Especially, extinction behaviors quite different from the previous study were observed.

• Journal of Power Electronics
• /
• 제9권2호
• /
• pp.180-187
• /
• 2009

When converters operate in megahertz range, the passive components and magnetic devices generate high losses. However, the eddy current issues and choices of magnetic cores significantly affect on the design stage. Apart from that, the components' reduction, miniaturization technique and frequency scaling are required as well as improvement in thermal capability, integration technique, circuit topologies and PCB layout optimization. In transformer design, the winding and core losses give great attention to the design stage. From simulation work, it is found that E-25066 material manufactured by AVX could be the most suitable core for high frequency transformer design. By employing planar geometry topology, the material can generate significant power loss savings of more than 67% compared to other materials studied in this work. Furthermore, young researchers can use this information to develop new approaches based on concepts, issues and methodology in the design of magnetic components for high frequency applications.

• 조명전기설비학회논문지
• /
• 제22권3호
• /
• pp.59-65
• /
• 2008

High-speed electrical motor has been studied for several applications, i.e. for direct-drive systems of centrifugal compressors and turbo blowers. This paper deals with a design consideration of electromagnetic, mechanical and thermal limits of high-speed induction motor for turbo blower. Basic design concept of high-speed motor was proposed. As the motor is to be operated at high speed, the losses are quite different from conventional low-speed machines. Especially, the increases of rotor eddy current and friction losses could lead to an overheated motor. So, we suggested a special cooling system to reduce temperature rise. And, based upon this design concept, the prototype induction motor(37[kW], 45,000[rpm]) for high-speed turbo blower was designed and 2-D electromagnetic field analysis was implemented. Finally, criteria to evaluate the characteristics of high-speed induction motor have been proposed and tested.

• 전력전자학회논문지
• /
• 제25권2호
• /
• pp.127-132
• /
• 2020

In this study, single-phase and three-level boost converters applied to the photovoltaic system were compared and analyzed in terms of efficiency and power density according to the input voltage and load conditions. For accurate analysis of efficiency, the losses in each device of the single-phase and three-level boost converters were derived using mathematical equations and simulations by using the PSIM thermal module. Then, the losses were compared with the efficiency confirmed through the actual experiments. Results confirmed that the efficiency and power density can be improved by applying the three-level boost converter to the system according to the selection of the switching frequency.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.242-242
• /
• 2007

To verify the applicability of High Temperature Superconducting (HTS) cable system into the real grid, the HTS cable system with the specification of 22.9 kV, 1250 A, 100 m long was installed in the second quarter of 2006, and the long term field test has been in progress at the KEPCO's Gochang power testing yard. Apart from the conventional power cable, HTS cable system requires sufficient thermo-mechanical strength to endure a large temperature difference. To date, the KEPCO HTS cable system was cooled down and warmed to the room temperature several times to investigate the influence of thermal cycles experimentally. Dielectric properties, critical current dependance and heat losses were evaluated at each step of thermal cycle. The test results showed that thermal cycle did not induce the degradation of dielectric properties, and the critical current decreased to 5 % of the initial value.