• 한국환경보건학회지
• /
• 제30권5호
• /
• pp.395-401
• /
• 2004

In this study, lots of methods have been studing to utilize energy and decrease contaminated effluents. There has been great progress on IGCC (Integrated gasification combined cycle) to reduce thermal energy losses. The following results have been conducted from desulfurization experiments using waste shell to remove $H_{2}S$. Unreacted core model ior desulfuriration rate prediction of sorbent was indicated. These were linear relationship between time and conversion. So co-current diffusion resistance was conducted reaction rate controlling step. The sulfidation rate is likely to be controlled primarily by countercurrent diffusion through the product layer of calcium sulfide(CaS) formed. Maximum desulfurization capacity was observed at 0.631 mm for lime, oyster and hard-shelled mussel. The kinetics of the sorption of $H_{2}S$ by CaO is sensitive to the reaction temperature and particle size at $800^{\circ}C$, and the reaction rate of oyster was faster than the calcined limestone at $700^{\circ}C$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전력기술부문
• /
• pp.405-407
• /
• 2006

The power system analysis based on the accurate impedance of the individual underground cable, which is the inter connected to a large power system, is required. A study on calculation method of impedance allowable current for underground cables. furthermore, various methods of bonding and earthing the sheath have been used for the purpose of eliminating or reducing the sheath losses. the effectes of bonding and earthing must be includied in impedances. therefore, the subject of predicting thermal performance of soil and cable systems has been received increasing attension. for these problems, this paper describes a general formulation of impedance that is based on the effect of crossbonding and earthing of the sheath on the 66kV, 132kV and 220kV underground cable systems. also the work is presented, for calculating the temperature rise of power cable and soil.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 추계학술대회 논문집
• /
• pp.143-144
• /
• 2014

본 논문에서는 NPC(Neutral Point Clamped) 및 T-type IGBT 모듈을 이용하여 3상 3-레벨 인버터를 구성하고, 인버터에서 발생되어지는 도통손실과 스위칭 손실을 PSIM의 Thermal Module을 사용하여 확인한다. 또한 토폴로지 상의 차이에 의해 발생되어지는 스위치 손실을 비교 하며, 시뮬레이션에 적용한 파라미터 값들을 수식에 직접 적용하여 손실에 영향을 미치는 파라미터를 확인하고, 각 파라미터의 값의 변화가 주어진 조건에서 전체 손실에 미치는 영향을 확인한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1667-1669
• /
• 2001

The clack of Insulator, which results from internal or external surges such as electrical, mechanical, and thermal stress, might cause ground fault and a power failure without proper repairs. In order to minimize losses caused by a short-term or long-term power failure, it is necessary to detect the deteriorated insulator as early as possible. To do so, we will develop a new device, which can detect and trace an deteriorated insulator by monitoring its physical change the variation of frequency spectrum. This device will do so by finding a Periodic wave sharp (120 Hz), a peculiar wave generated by defused electricity.

• Archives of Pharmacal Research
• /
• 제9권1호
• /
• pp.55-61
• /
• 1986

To increase the dissolution rate of piroxicam, chitin and chitosan which are widely occurring biodegradable natural materials were used as drug carriers. The ground mixtures of piroxicam with chitin or chitosan were prepared by grinding in a ball mill. The dissolution rates of piroxicam from the ground mixtures were enhanced markedly than that from the physical mixtures or from intact piroxicam. The X-ray diffraction peaks disappeared in the ground mixture indicating the production of the amorphous form. The comparison of infrared spectra of the physical mixture and the ground minture showed an interaction such as association between the functional groups of piroxicam and chitin or chitosan in the molecular level. The weight losses in TGA curves shoed all the same patterns. However, in the ground mixture by DTA curve, the undothermic peak due to the fusion of piroxicam was disappeared indicating the different thermal property.

• 동력기계공학회지
• /
• 제19권3호
• /
• pp.5-10
• /
• 2015

Femtosecond laser machining has been applied for creating a sensor function in silica glass optical fibers. Femtosecond laser pulses make it possible to fabricate micro structures in processed regions of a very thin glass fiber line because femtosecond laser pulses can extremely minimize thermal effects. With the laser machining to optical fiber using a single shot of 210-fs laser at a wavelength of 800 nm, it was observed that a processed region surrounded a thin layer which seemed to be a hollow cavity monitored by scanning electron microscopy (SEM). This study aims at a theoretical investigation for the processed region by using a numerical analysis in order to embed sensing function to optical fibers. Numerical methods based finite element method (FEM) has been used for an optical waveguide modeling. This report suggests two types modeling and describes a comparative study on optical losses obtained by the experiment and the numerical analysis.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 the technical trends in the world automobile and lubricant market
• /
• pp.21-24
• /
• 2002

There is a trend with driveline lubricants toward improved thermal stability, vehicle component durability and fuel efficiency. These improvements can significantly reduce vehicle operating costs and improve customer satisfaction. Of these improvements, the fuel efficiency is getting a substantial attention due to recent focus on $CO_2$ emission control in Europe, Japan and $CAF{\'{E}}$ requirement in U.S.A. Lower viscosity axle oils and transmission fluids are currently being evaluated as potential solutions since these lubricants tend to reduce the churning losses and can improve the fuel efficiency. However, these lubricants should provide adequate gear and bearing protection, while increasing the overall efficiency of the driveline components. In this paper, the development of new fuel efficient axle was discussed with the focus on the effect of base oils, additives, and viscosity modifiers on the fuel efficiency of driveline components.

• Macromolecular Research
• /
• 제9권5호
• /
• pp.247-252
• /
• 2001

Tricyclic aliphatic dianhydride monomer, tricycle[4.2.2.0]dec-9-ene exo, endo-3,4: 7,8-tetra-carboxylicdianhydride (TCDDA), was synthesized by photochemical reaction and poly(amic acid)s from TCDDA and diamines such as 1,4-bis-(4-aminophenoxy)benzene (BAB), 2,2-bis(4-(4-aminophenoxy) phenyl) propane (BAPP), 2,2-bis(4-(4-aminophenoxy)phenyl)hexafluoropropane (BAPHF), bis(4-(4-ami-nophenoxy) phenyl)sulfone (BAPS), and 1,4-bis-(4-aminophenoxy)biphenyl (BABP) were prepared. The inherent viscosities of the poly(amic acid)s were between 0.39 and 0.50 dL/g. The poly(amic acid)s were converted to polyimide films by thermal imidization. The glass transition temperatures (T$\_$g/) of the polyimides were in the range of 201-263$\^{C}$. The thermogravimetric analysis (TGA) thermogram of these polyimides showed the temperatures of 5% weight losses between 375 and 393$\^{C}$ in nitrogen atmosphere. To show their utility for image generation, degradations of these polyimides in UV exposure were investigated by UV spectroscopy.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.315-316
• /
• 2005

This paper describes the AC accelerated ageing characteristics of zinc oxide varistors for the station class lightning surge arresters. ZnO varistors whose rated voltage were 3.27kV, 4.00kV, and 6.00kV were manufactured with general ceramic production methods. The power loss of sample A varistors rapidly increased and eventually showing the thermal run-away, but sample B and sample C varistors exhibited negative creep phenomena in power losses during the test.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 초전도 자성체
• /
• pp.79-82
• /
• 2002

Induction heating is widely used in today's industry, in operations such as metal hardening, preheating for forging operations, melting or cooking. In this paper, it was presented the magneto-thermal analysis of an induction heating jar(IH-JAR) with the material value of the stainless and the aluminum for efficient design. The magnetic field intensity inside the axisymmetric shaped cooker was analyzed using three-dimensional axisymmetric finite element method(FEM) and the effectual heat source was obtained by ohmic losses from eddy currents induced in the jar. The heat was calculated using the heat source and heating equation. Also, it was represented the temperature characteristics of the IH-JAR according to time and relative permeability in stainless parts and in aluminum parts.