• 한국추진공학회지
• /
• 제20권3호
• /
• pp.71-77
• /
• 2016

내열고무 성능평가 모사시험장치를 이용하여 고체로켓추진기관 연소관의 내부단열을 위해 사용하는 Kevlar/EPDM 내열고무의 압력변화에 따른 열반응 특성을 비교하였다. 연소실 유효평균압력 및 유효연소시간은 각각 1,030 psi, 35.86 s 및 1,406 psi, 36.63 s이었다. 시험후 시편의 표면 상태는 차이가 없었으며, 열파괴두께는 각각 4.10 mm 및 4.18 mm이었다. 열반응 상수 ${\xi}$, ${\zeta}$ 및 열파괴 속도 $V_{TD}$는 각각 0.7839, -0.1646, 0.1328 및 0.7836, -0.1730, 0.1346이었다. Kevlar/EPDM 내열고무의 열반응 특성은 압력변화에 따른 차이를 보이지 않았다.

• 한국군사과학기술학회지
• /
• 제5권1호
• /
• pp.83-95
• /
• 2002

시뮬레이션/모델링 기법을 이용하여 세라믹 섬유단열재의 열전도도를 분석하였으며, 열전도도를 예측할 수 있는 프로그램을 개발하였다. 세라믹 섬유 단열재는 $1600^{\circ}$까지 사용할 수 있는 고온용 단열재로써 극심한 공력가열 환경에 노출되는 고속 항공기 및 유도무기에 적용 가능한 재료이다. 섬유 단열재의 열전도도는 전도 열전달 및 복사 열전달에 의해 결정되므로 각각의 메카니즘에 의한 열전도도를 계산하였다. 전도 열전달은 균질화 기법을 이용하였으며, 복사 열전달은 무작위 수(random number)를 이용하여 계산하였다. 특히 복사 가능 거리 및 확률을 도입함으로써 실험 상수(experimental constant) 없이 복사 열전도도를 계산할 수 있었다. 본 논문 연구 방법으로 계산된 섬유 단열재의 열전도도는 실험값에 대하여 평균 93%의 신뢰도를 나타내었다. 또 본 논문에서 개발한 열전도도 계산프로그램은 섬유와 공기의 열적 특성만으로 계산이 가능하므로, 섬유 단열재와 유사한 내부조직을 갖는 대부분의 복합재료에 적용할 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집
• /
• pp.19-24
• /
• 2005

To improve mean-life and reliability of power cable, we have investigated specific heat (Cp) and thermal conductivity of XLPE insulator and semiconductive materials in 154kV underground power transmission cable. Specimens were respectively made of sheet form with EVA, EEA and EBA added 30wt%, carbon black, and the other was made of sheet form by cutting XLPE insulator in 154kV power cable. Specific heat (Cp) and thermal conductivity were· measured by DSC (Differential Scanning Calorimetry) and Nano Flash Diffusivity. Specific-heat measurement temperature ranges of XLPE insulator were from 20[$^{\circ}C$] to 90[$^{\circ}C$], and the heating rate was 1[$^{\circ}C$/min]. And the measurement temperatures of thermal conductivity were 25[$^{\circ}C$}], 55[$^{\circ}C$] and 90[$^{\circ}C$]. In case of semiconductive materials, the measurement temperature ranges of specific heat were from 20[$^{\circ}C$] to 60[$^{\circ}C$], and the heating rate was 1[$^{\circ}C$/min]. And the measurement temperatures of thermal conductivity were 25[$^{\circ}C$] and 55[$^{\circ}C$]. From these experimental results, both specific heat and thermal conductivity were increased by heating rate because volume of materials was expanded according to rise in temperature.

• Transactions on Electrical and Electronic Materials
• /
• 제5권4호
• /
• pp.129-132
• /
• 2004

The electrothermal characteristics of a high voltage LIGBT(Lateral Insulated Gate Bipolar Transistor) using thin silicon on insulator (SOI) and silicon on sapphire (SOS) such as thermal conductivity and sink is analyzed by MEDICI. The device simulations demonstrate that the thermal conductivity of the buried oxide is an important parameter for modeling of the thermal behavior of SOI devices. In this paper we simulated the thermal conductivity and temperature distribution of a SOI LIGBT with an insulator layer of SiO$_2$ and $Al_2$O$_3$ at before and after latch-up and verified that the SOI LIGBT with the $Al_2$O$_3$ insulator had good thermal conductivity and reliability.

• 제어로봇시스템학회논문지
• /
• 제16권1호
• /
• pp.25-32
• /
• 2010

The paper proposes a hierarchical fault detection method for the high voltage equipment using a microphone array which detects the location of fault and the thermal imaging and CCD cameras which verifies the fault and stores the image, respectively. There are partial arc discharges on the faulty insulators, which generates a specific pattern of sound. Detecting the signal using the microphone array, the location of the faulty insulator can be estimated. The 6th band-pass filter was applied to remove noise signal from wind or external influence. When the mobile robot carries the thermal and CCD cameras to the possible place of the fault insulator, the fault insulators or power transmission wires can be detected by the thermal images, which are caused by the aging or natural erosion. Finally, the CCD camera captures the image of the fault insulator for the record. The detection scheme of fault location using the microphone array and the thermal images have been proved to be effective through the real experiments. As a result of this research, it becomes possible to use a mobile robot with the integrated sensors to detect the fault insulators instead of a human being.

• 한국조명전기설비학회지:조명전기설비
• /
• 제10권4호
• /
• pp.85-92
• /
• 1996

본 논문에서는 현수애자의 경년변화 분석을 위해 과전파괴 시험과 장기강도 기계적 하중시험을 신품과 사용품에 대하여 비교, 시험하였다. 현수애자의 경년변화에 따라 애자표면 온도가 대기보다 약 2[$^{\circ}C$] 상승에서 약 7~8[$^{\circ}C$] 상승이 발생하였고, 접착제로 사용한 포틀랜드 시멘트의 오토크래브 팽창율도 경년변화 사고가 많은 시료(오토크래브 팽창율의 측정치 :0.37[%]) 가 사고가 적은 시료(오토크래브 팽창율 : 0.1[%])보다 높게 나타났다. 또한, 신품보다 사용품의 품질관리지수 Qs와 인장강도가 현저히 저하됨을 알 수 있어, 우리나라의 기후조건에 맞도록 경년변화 시험 기준 개정도 요구된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.217-218
• /
• 2012

To prevent energy waste in buildings used heat insulator. Heat insulator materials can be classified inorganic and organic. The organic material is be toxic gas emission, when a fire occurs. And it has lower water resistance. The inorganic material is heavy and worse thermal performance than organic materials. This study focused on thermal conductivity and density of inorganic foam material for using industrial by-products materials.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권1호
• /
• pp.6-10
• /
• 2006

To improve mean-life and reliability of power cable, we have investigated specific heat (Cp) and thermal conductivity of XLPE insulator and semiconducting materials in 154(kV) underground power transmission cable. Specimens were respectively made of sheet form with EVA, EEA and EBA added $30[wt\%],$ carbon black, and the other was made of sheet form by cutting XLPE insulator in 154(kV) power cable. Specific heat (Cp) and thermal conductivity were measured by DSC (Differential Scanning Calorimetry) and Nano Flash Diffusivity. Specific-heat measurement temperature ranges of XLPE insulator were from $20[^{\circ}C]\;to\;90[^{\circ}C],$ and the heating rate was $1[^{\circ}C/mon].$ And the measurement temperatures of thermal conductivity were $25[^{\circ}C],\;55[^{\circ}C]\;and\;90[^{\circ}C].$ In case of semiconducting materials, the measurement temperature ranges of specific heat were from $20[^{\circ}C]\;to\;60[^{\circ}C],$ and the heating rate was $1[^{\circ}C/mon].$ And the measurement temperatures of thermal conductivity were $25[^{\circ}C],\;55[^{\circ}C].$ In addition we measured matrix of semiconducting materials to show formation and growth of carbon black in base resins through the SEM. From these experimental results, both specific heat and thermal conductivity were increased by heating rate because volume of materials was expanded according to rise in temperature.

• Transactions on Electrical and Electronic Materials
• /
• 제8권3호
• /
• pp.143-146
• /
• 2007

Polymer insulators are used widely in variable fields for high voltage insulation and separating people from high voltage charging parts for safety and also supporting overhead power line in electric railway. But it may be broken down by tracking path resulting from continuous surface discharge. This paper has investigated synthetically both the characteristics of electrical aging using precision CT(current transformer) and the thermal aging using thermography method. Electrical aging was analyzed for time-frequency region and thermal aging was illustrated by image processing method. This synthetic method may be an appropriate one to evaluate the surface degradation of polymer insulator.

• 대한기계학회논문집B
• /
• 제25권1호
• /
• pp.36-46
• /
• 2001

Finite element analyses of the ceramic drying process are performed. The heat and moisture movements in green ceramics caused by temperature gradient, moisture gradient, conduction, convection and evaporation are considered. The finite element formulation for solving the temperature and moisture distributions which not only change the volume but also induce the hygro-thermal stress is carried out. In order to verify the formulation, the drying process of a ceramic electric insulator is simulated. Temperature distribution, moisture distribution, and hygro-thermal stress are compared with those of other researcher. Good agreements are achieved.