• 공업화학
• /
• 제31권3호
• /
• pp.284-290
• /
• 2020

Energetic thermoplastic elastomers (ETPEs) based on glycidyl azide polymer (GAP) and carboxylated GA copolymers [GAP-ETPE and poly(GA-carboxylate)-ETPEs] were synthesized using isophorone diisocyanate (IPDI), dibutyltin dilaurate (DBTDL), 1,4-butanediol (1,4-BD), and soft segment oligomers such as GAP and poly(GA-carboxylate). The synthesized GAP-ETPE and poly(GA-carboxylate)-ETPEs were characterized by Fourier transform infrared (FT-IR), gel permeation chromatography (GPC), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), universal testing machine (UTM), calorimetry and sensitivity towards friction and impact. DSC and TGA results showed that the introduction of carboxylate group in GAP helped to have better thermal properties. Glass transition temperatures of poly(GA-carboxylate)-ETPEs decreased from -31 ℃ to -33 ℃ compared to that of GAP-ETPE (-29 ℃). The first thermal decomposition temperature in poly(GA_0.8-octanoate_0.2)-ETPE (242 ℃) increased in comparison to that of GAP-ETPE (227 ℃). Furthermore, from calorimetry data, poly(GA-carboxylate)-ETPEs exhibited negative formation enthalpies (-6.94 and -7.21 kJ/g) and higher heats of combustion (46713 and 46587 kJ/mol) compared to that of GAP-ETPE (42,262 kJ/mol). Overall, poly(GA-carboxylate)-ETPEs could be good candidates for a polymeric binder in solid propellant due to better energetic, mechanical and thermal properties in comparison to those of GAP-ETPE. Such properties are beneficial to application and processing of ETPE.

• 한국식품과학회지
• /
• 제24권5호
• /
• pp.463-469
• /
• 1992

열공정이 생선단백질의 조직 형성에 미치는 영향을 단백질 sol의 열안정성과 가열시의 rigidity 형성 및 최종 겔의 구조적인 측면으로 살펴보았다. 가열하는 동안에 나타나는 변성 피크는 소금첨가에 따라서, 가열속도에 따라서 또한 낮은 온도에서의 전처리에 따라 변성온도가 사라지거나 낮은 쪽으로 이동하였고 단백질의 열용량도 줄어들고 불안정한 상태로 변하였다. $4^{\circ}C$에서의 전처리는 가열시 조직의 굳기형성에 지속적인 상승효과를 가져왔고 많은 탄성력의 증가를 가져왔으나, $40^{\circ}C$에서의 전처리는 일시적으로 조직강도의 증가만 가져왔다. 그러나 낮은 온도($4^{\circ}C$ 나 $40^{\circ}C$)에서의 전처리 후 생성되는 겔 내부조직은 큰 집성물이 보이는 구조적 유사성을 보였으며, SH기를 변형시킨 겔의 구조도 조직의 강도변화를 나타내는 특징을 나타내었다.

• 폴리머
• /
• 제33권1호
• /
• pp.1-6
• /
• 2009

Poly(2-acetamidoacrylic acid) (PAAA) 수화젤 기판 내에 수용액상에서 이온교환에 의해 잘 분산된 CdS 나노입자를 응집이 없는 새로운 형태의 나노복합체로서 합성하였다. TEM 이미지분석을 통하여, CdS/PAAA 수화젤 복합체내에 분포되어 있는 CdS 나노입자의 평균 직경은 4.5 nm이며, 복합체의 형태는 6개월이 지나도 그대로 유지됨을 알았다. TGA와 EGA를 이용하여 복합재료의 열적 안정성이 약 100도 정도 상승하며, 건조젤 내의 CdS 입자의 함량이 70 wt% 이상이 됨을 확인할 수 있었으며 또한 각 온도에서 휘발 또는 분해된 기체를 통해 성분 물질을 확인하였다.

• 한국재료학회지
• /
• 제29권10호
• /
• pp.631-638
• /
• 2019

As automation systems become more common, there is growing interest in functional labeling systems using organic and inorganic hybrid materials. Especially, the demand for thermally and chemically stable labeling paper that can be used in a high temperature environment above $300^{\circ}C$ and a strong acid and base atmosphere is increasing. In this study, a composite coating solution for the development of labeling paper with excellent thermal and chemical stability is prepared by mixing a silica inorganic binder and titanium dioxide. The silica inorganic binder is synthesized using a sol-gel process and mixed with titanium dioxide to improve whiteness at high-temperature. Adhesion between the polyimide substrate and the coating layer is secured and the surface properties of the coating layer, including the thermal and chemical stability, are investigated in detail. The effects of the coating solution dispersion on the surface properties of the coating layer are also analyzed. Finally, it is confirmed that the developed functional labeling paper showed excellent printability.

• 공업화학
• /
• 제22권2호
• /
• pp.209-213
• /
• 2011

낮은 열전도율, 높은 비표면적과 기공률을 갖는 소수성 실리카 에어로겔 과립을, 저가의 물유리를 실리카 전구체로 사용하고 상압건조하여 제조하였다. 별도의 과립화 첨가제 및 과립화 기구를 사용하지 않고, 산도(~5)를 변화시켜 모노리스 형태의 습윤겔을 먼저 제조하여, 용매치환/소수성화 동시공정과 상압건조공정 과정에서 습윤겔이 깨져 0.5~2 mm 크기의 과립형태 실리카 에어로겔을 제조하였다. 제조된 실리카 에어로겔 과립은 비표면적, 평균기공크기, 기공부피가 각각 $593m^2/g$, 34.9 nm, $4.4cm^3/g$으로 실리카 에어로겔 분말과 거의 유사한 다공도를 가지고 있으며, 열전도율도 $20^{\circ}C$에서 19.8 mW/mK으로 나타나 같은 조건에서 제조된 실리카 에어로겔 분말과 거의 같은 단열성을 나타내었다.

• International Journal of Safety
• /
• 제8권1호
• /
• pp.14-17
• /
• 2009

The $Co^{60}$ $\gamma$-ray irradiation effects on the electrical and thermal characteristics of low density polyethylene crosslinked by Dicumyl peroxide (DCP) were investigated. We experimented on electrical properties as following; electrical tree inception and growing type for applying AC step voltage, AC breakdown strength, volume resistivity with increasing dosage. Also, chemical analyses were performed TGA, gel fraction. These electrical properties changed depending upon its crosslinking degree and byproducts from crosslinking reactions. Crosslinking reactions were considered causing by $\gamma$-ray irradiation and DCP had contained in low density polyethylene.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 제5회 학술대회 논문집 일렉트렛트 및 응용기술연구회
• /
• pp.25-28
• /
• 2003

Ozone is a strong and useful oxidizing gas for the fabrication of oxide thin films. In order to obtain high quality oxide thin films, higher ozone concentration is necessary. In this paper an ozone condensation system was evaluated from the viewpoint of an ozone supplier for oxide thin film growth. Ozone was condensed by an adsorption method and the ozone concentration reached 8.5 mol% in 2.5 h after the beginning of the ozone condensation process, indicating high effectiveness of the condensation process. Ozone was continuously desorbed from the silica gel by the negative pressure. We found the decomposition in the ozone concentration negligible if the condensed ozone is transferred from the ozone condensation system to the film growth chamber within a few minutes.

• 한국세라믹학회지
• /
• 제29권12호
• /
• pp.970-980
• /
• 1992

${\gamma}-alumina$ membranes were prepared by sol-gel dip coating or pressurized coating of boehmite sols on slipcasted ${\gamma}-alumina$ support tubes. The particle size of sols synthesized via the modified Yoldas-method could be controlled below 5 mn according to the mole ratio of nitric acid/aluminumtri-sec-butoxide (0.07~1.0). The reproducible crack-free composite membranes were produced by the 2nd dip coating or the pressurized coating technique using very stable sols with the particle size of 45 nm. Nitrogen gas permeability through the top-layer in the composite membrane was about $70~55{\times}10^{-7}\;mol/m^2{\cdot}s{\cdot}Pa$. The thermal stability of the top layer was proved to be good enough upto the heat-treatment temperature of $500^{\circ}C$.

• 한국수소및신에너지학회논문집
• /
• 제28권1호
• /
• pp.24-29
• /
• 2017

A fluorinated polybenzimidazole (FPBI) was synthesized from 3,3-diaminobenzidine (DAB) of tetraamine, 2,2-bis(4-carboxyphenyl)hexafluoropropane of aromatic biscarboxylic acid, and 4,4-sulfonyldibenzoic acid of aromatic biscarboxylic acid in polyphosphoric acid (PPA). A FPBI was easily cast and made into clear films. The structure of condensation polymers and corresponding membranes were analyzed using GPC (gel permeation chromatography), $^1H$-NMR ($^1H$ nuclear magnetic resonance) and FT-IR (fourier transform infrared). TGA (thermogravimetric analysis) analysis showed that the prepared membranes were thermally stable, so that elevated temperature fuel cell operation would be possible. The proton conductivity of the FPBI membranes increased with increasing temperatures in the polymer. A FPBI membrane has a maximum ion conductivity of 45 mS/cm at $90^{\circ}C$ and 100% relative humidity.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.410-411
• /
• 2009

The multi-component ceramic proton conductor, $BaZr(Y)O_3-SiO_2-TiO_2-ZrO_2$ (BZY-STZ) and $LaPO_4-SiO_2-TiO_2-ZrO_2$ (LP-STZ), were synthesized by micro-emersion and sol-gel technique. The characterization of proton conductors were carried out using X-ray diffraction(XRD), thermogravimetric analysis(TGA), differential thermal analysis(DTA), impedance analysis. The proton conductors indicate the possibility of application for the intermediate temperature up to $700^{\circ}C$.