• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.7 no.1
• /
• pp.31-63
• /
• 1969

A series of experiment was carried out to study on the production of disease-free seed potatoes at the Alpine Experiment Station from 1960 to 1968, which initiated a study of comparison on degeneration of plain warm region and high altitude products and the effect of latent potato virus X (PVX) and potato leaf roll virus(PLRV) on degeneration. Particular observations were made on some aspect of the nature of potato virus disease and its control such as concentrations of PVX, range of host plants, physical properties such as concentrations of PYX, range of host plants, physical properties and carrying effect of insects, by investigating 9 different areas of the main potato producing regions (Kimhae, Taegu, Choongju, Taejoen, Suwon, Kwangju, Chonju, Cheju and Chinju). Highly purified anti-serum was separated and tested for control of the virus disease and also various method of prevention and control of PLRV were observed, using cultivation of sprouted seed tubers, early harvesting method, and systemic chemicals. The results obtained are summarized as follows; 1. Potato yield in the plain region decreased by 32.8~66.3% in the first year cultivation of seed potatoes from colder region, and the rate of virus infection was 92.9 to 95.4%. 2. Plants of three families including, 20 species were susceptible to the PVX, and among the plants Salvia officinalis of a habits only was the carrier while the symptom of Digitalis purpurea of Screphulariaceae was masked. Necrosis and ring spot was occurred in most pJants of the Solanaceae and ring spot symptom also was observed in Nicotiana tabacum L. var. White Burley and in N. glutinosa. 3. The 8$C_2$ strain of virus had the following physical properties; thermal inactivation point, 68-$72^{\circ}C$ : dilution inactivation point, above 1, 000, 000 dilution: ageing in vitro, 240-360 days: and ageing in dry plant tissue, 30 days. 4. Myzus persicae and Oxya spp. did not transmit the 8$C_2$ strain of potato virus. 5. Virus was purified through the ammonium sulphate isolating method, and higher titer value, 1/2048 was obtained through anti-serum test. 6. Inhibition Chenopodiacae on the virus infection of potato was remarkable, and inhibition of local lesion host also was observed. 7, By earlier planting of sprouted seed tubers, growth period could be prolonged by 10 to 12 days. 8. Earlier harvest decreased much the rate of virus infection of seed potatoes. 9. According to the results of aphid control trial using systemic soil insecticides at Kangnung and Taekwanlyung, PSP 204, Disyston and Thimet was effective to aphid control. In particular, control effect of twice treatments of PSP 204 was great. 10. Treatmental effect of those chemicals lasted about 60-70 days. However, single foliar application of emulsified chemicals was not effective to potato virus control. 11. The effect of PSP 204, Disyston, and Thimet on the control of potato leaf roll virus was great, particularly in the case of two treatments of PSP 204, at Kangnung as well as at Taekwanlyung. Higher negative correlationship between the control effect of potato leaf roll virus and potato yield was observed showing the value r=-0.85 at Kangnung, and r=-0.87 at Taekwanlyung. 12. Differences in the control effects among PSP 204, Disyston, and Thimet was not noticed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.4
• /
• pp.183-189
• /
• 2012

Surface treatments and their effects on high temperature properties for the Hastelloy X, which is a promising candidate alloy for high temperature heat-transport system, have been evaluated. For TiAlN and $Al_2O_3$ overlay coatings, the two different PVD (physical vapor deposition) methods using an arc discharge and a sputtering, were applied, respectively. In addition, a different surface treatment method of the diffusion coating by a pack cementation of Al (aluminiding) was also adopted in this study. To achieve enhanced thermal oxidation resistance at $1000^{\circ}C$ by suppressing the inhomogeneous formation of thick $Cr_2O_3$ crust at the surface region, a study for the surface modification methods on the morphological and structural properties of Hastelloy X substrates has been conducted. The structural and compositional properties of each sample were characterized before and after heat-treatment at $1000^{\circ}C$ under air and He environment. The results showed that the Al diffusion coating showed the more enhanced high temperature properties than the overlay coatings such as the suppressed thick $Cr_2O_3$ crust formation and lower wear loss.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.2
• /
• pp.59-74
• /
• 2015

The purpose of this study is to analyze reasonable green area ratios for mitigating urban heat island considering various land use types. Land uses of 5 types such as single residential, multi residential, commercial area, public facility, and industrial area were considered. Green areas were extracted from the tree attribution of land cover. Effect of urban heat island was analysed by the surface temperature of ASTER thermal infrared radiance scanned daytime and nighttime. Mitigation effect of green area at daytime was higher than nighttime. Surface temperature of green area was low in single residential at daytime. But the difference of surface temperature by each land use type was small. The effect of surface temperature mitigation of green area was lower in industrial area. The results of reasonable green area ratios for mitigating urban heat island indicate that surface temperature was the lowest with green area ratio of 40~50% in single residential, multi residential, and commercial area at daytime. Surface temperature of nighttime was not changed much by green area ratios. Therefore, the results of this study will be suggested in urban development planning to construct effectively green area for mitigating urban heat island.

• Journal of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.698-707
• /
• 2002

A review is presented of experimental studies on the strength performance of concrete exposed at short-term and rapid heating as in a fire and after cooling. Emphasis is placed on concretes with high original compressive strengths, that is, high-strength concrete(HSC). The compressive strength-temperature relationships from the reviewed test programs are distinguished by the test methods used in obtaining the data(unstressed, unstressed residual strength, and stressed tests) and by the aggregate types(normal or lightweight), The compressive strength properties of HSC vary differently with temperature than those of NSC. HSC have higher rates of strength loss than lower strength concrete in the temperature range of between 20$^{\circ}C$ to about 400$^{\circ}C$. These difference become less significant at temperatures above 400$^{\circ}C$ compressive strengths of HSC at 800$^{\circ}C$ decrease to about 30 ％ of the original room temperature strength. A comparison of lest results with current code provisions on the effects of elevated temperatures on concrete compressive strength and elastic modulus shows that the CEN Eurocodes and the CEB provisions are unconservative.

• Journal of Radiation Protection and Research
• /
• v.22 no.2
• /
• pp.119-125
• /
• 1997

PHWR achieves high neutron economy by adopting heavy water as its moderator and coolant. On the other hand it permits much tritium generation, compared to LWR, due to the neutron capture reaction of deuterium in heavy water. Meanwhile in the reactor core, $^3He formed as the result of-decay of tritium, captures a thermal neutron and transforms to tritium again. The existing calculation models on tritium generation in PHWR neglect the contribution of $^3He$ in both moderator and coolant due to its relatively low solubility. However the neutron capture cross-section of $^3He$ is almost $1.6{\times}10^7$ times as large as that of deuterium. That means that the dissolved amount of 0.03 ppm of $^3He$ in heavy water is enough to generate the same amount of tritium as that generated by the deuterium of total heavy water in the system. This study dealt with the contribution of $^3He$ to tritium generation. As a sample case, the contribution of $^3He$ to the tritium generation in Wolsong #1 was evaluated and compared to the measured values. According to the result of this study, it is concluded that $^3He$ in coolant contributes very much to the tritium generation but that in moderator shows negligible effects due to the low solubility and $^4He$ cover gas. At the beginning of the plant operation, the contribution of $^3He$ is slightly greater than the measured value but agrees well with the measured as the operating time increases.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.2
• /
• pp.114-118
• /
• 2017

Purpose: The aim of this study was to investigate the effects of a titanium component for the zirconia abutment in the internal connection implant system on screw loosening under thermocycling conditions. Materials and Methods: Internal connection titanium abutments and external connection zirconia abutments with titanium sockets were connected respectively to screw-shaped internal connection type titanium implants with 30 Ncm tightening. These implant-screw-abutment assemblies were divided into two groups of five specimens each; titanium abutments as control and zirconia abutments with titanium sockets as experimental group. The specimens were subjected to 2,000 thermocycles in water baths at $5^{\circ}C$ and $55^{\circ}C$, with 60 seconds of immersion at each temperature. The removal torque values (RTVs) of the abutment screws of the specimen were measured before and after thermocycling. RTVs pre- and post-thermocycling were investigated in statistics. Results: There was not screw loosening identified by tactile and visual inspection in any of the specimens during or after thermocycling. The mean RTV difference for the control group and the experimental group were $-1.34{\pm}2.53Ncm$ and $-1.26{\pm}2.06Ncm$, respectively. Statistical analysis using an independent t-test revealed that no significant differences were found in the mean RTV difference of the groups (P > 0.05). Conclusion: Within the limitations of this in vitro study, the titanium socket for the zirconia abutment did not show a significant effect on screw loosening under thermal stress compared to the titanium abutment in the internal connection implant.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.4
• /
• pp.27-35
• /
• 2008

This work proposes a 14b 150MS/s 0.13um CMOS ADC for SDR systems requiring simultaneously high resolution, low power, and small size at high speed. The proposed ADC employs a calibration-free four-step pipeline architecture optimizing the scaling factor for the input trans-conductance of amplifiers and the sampling capacitance in each stage to minimize thermal noise effects and power consumption at the target resolution and sampling rate. A signal- insensitive 3-D fully symmetric layout achieves a 14b level resolution by reducing a capacitor mismatch of three MDACs. The proposed supply- and temperature- insensitive current and voltage references with on-chip RC filters minimizing the effect of switching noise are implemented with off-chip C filters. The prototype ADC in a 0.13um 1P8M CMOS technology demonstrates a measured DNL and INL within 0.81LSB and 2.83LSB, at 14b, respectively. The ADC shows a maximum SNDR of 64dB and 61dB and a maximum SFDR of 71dB and 70dB at 120MS/s and 150MS/s, respectively. The ADC with an active die area of $2.0mm^2$ consumes 140mW at 150MS/s and 1.2V.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.2
• /
• pp.245-252
• /
• 2011

The combined effects of 10 kJ/$m^2$ ultraviolet-C (UV-C) with 50 ppm aqueous chlorine dioxide ($ClO_2$) on the qualities of red chicory and pak choi were examined. After the treatment, the samples were stored at $4{\pm}1^{\circ}C$ for 7 days. The combined treatment of $ClO_2$/UV-C reduced the initial populations of total aerobic bacteria in the red chicory and pak choi by 2.64 and 2.55 log CFU/g, respectively, compared to those of the control. Also, the populations of yeast and molds in the red chicory and pak choi by combined treatment were reduced by 2.41 and 2.00 log CFU/g, respectively. In addition, after 7 days of storage the total aerobic bacteria populations in the red chicory and pak choi were reduced to 3.71 and 3.93 log CFU/g, compared to 6.31 and 6.62 log CFU/g for the control, resulting in a significant decrease. Hunter L, a, and b values of red chicory and pak choi were not significantly different among the treatments. Non-thermal treatment caused a negligible change in sensory evaluation. These results suggest that the combined treatment of 50 ppm $ClO_2$ with 10 kJ/$m^2$ UV-C can be useful for maintaining the qualities of red chicory and pak choi.

• Journal of Sensor Science and Technology
• /
• v.29 no.2
• /
• pp.93-99
• /
• 2020

A colorimetric paper sensor was used to detect volatile nitrogen-containing compounds emitted from spoiled salmon filets to determine their freshness. The sensing mechanism was based on acid-base reactions between acidic pH-indicating dyes and basic volatile ammonia and amines. A sensing layer was simply fabricated by drop-casting a dye solution of bromocresol green (BCG) on a polyvinylidene fluoride substrate, and its color-change response was enhanced by optimizing the amounts of additive chemicals, such as polyethylene glycol, p-toluene sulfonic acid, and graphene oxide in the dye solution. To avoid the adverse effects of water vapor, both faces of the sensing layer were enclosed by using a polyethylene terephthalate film and a gas-permeable microporous polytetrafluoroethylene sheet, respectively. When exposed to basic gas analytes, the paper-like sensor distinctly exhibited a color change from initially yellow, then to green, and finally to blue due to the deprotonation of BCG via the Brønsted acid-base reaction. The use of ammonia analyte as a test gas confirmed that the sensing performance of the optimized sensor was reversible and excellent (detection time of < 15 min, sensitive naked-eye detection at 0.25 ppm, good selectivity to common volatile organic gases, and good stability against thermal stress). Finally, the coloration intensity of the sensor was quantified as a function of the storage time of the salmon filet at 28℃ to evaluate its usefulness in monitoring of the food freshness with the measurement of the total viable count (TVC) of microorganisms in the food. The TVC value increased from 3.2 × 10⁵ to 3.1 × 10⁹ cfu/g in 28 h and then became stable, whereas the sensor response abruptly changed in the first 8 h and slightly increased thereafter. This result suggests that the colorimetric response could be used as an indicator for evaluating the degree of decay of salmon induced by microorganisms.

• Applied Chemistry for Engineering
• /
• v.26 no.1
• /
• pp.53-58
• /
• 2015

Polycarbonate (PC)/graphene oxide (GO) composites with 3 phr of GO were prepared by using a twin screw extruder at 240, 260, and $280^{\circ}C$ after mixing the solution with chloroform. It was confirmed by DSC and TGA that the glass transition temperature ($T_g$) of PC/GO composites were not changed and the thermal stability was the best in case of the extrusion temperature at $260^{\circ}C$. Thermo mechanical properties of PC/GO composites according to extrusion temperatures were measured by dynamic mechanical analysis (DMA). Storage moduli of PC/GO composites were higher than that of pure PC and there was no detectable changes at varying the extrusion temperature. Based on these results, the extrusion temperature of PC/GO composites was fixed at $260^{\circ}C$. The degree of the chemical reaction of PC/GO composites with respect to the GO reduction time was confirmed by the C-H stretching peak at $3000cm^{-1}$ and the degree of the chemical reaction was similar to that of GO when the reduction time was 1 h. A decrease in the complex viscosity as a function of the GO reduction time was detected by dynamic rheometer, which may be originated from the enhancement of GO dispersion by PC-GO reaction. The GO dispersion was confirmed by scanning electron microscope (SEM).