• 한국응용과학기술학회지
• /
• 제20권4호
• /
• pp.353-357
• /
• 2003

Sodium azide (SA) is commonly used as propellant for inflating automatic safety bags and other chemical manufacturing purposes. The investigation of potentially thermal hazard of sodium azide and its mixture with polymers are very important because it can occur an expected traffic accident so we took a experiment s using different scanning calorimeter (DSC) in nitrogen atmosphere. The decomposition temperature were about $350{\sim}450^{\circ}C$. We could find not only exothermic reaction was remarkably decreased in mixture s of acrylonitrile-butadiene-styrene (ABS) and polyvinyl chloride (PVC), but also increasing mixed rate of ABS, polyvinyl alcohol (PVA) and polymethyl methacrylate (PMMA) decreased thermal decomposition heat.

• 한국세라믹학회지
• /
• 제27권6호
• /
• pp.707-712
• /
• 1990

The basic zirconium sulfate was prepared from ZrOCl2.8H2O and H2SO4 in the 9$0^{\circ}C$ aqueous solution. The pH and amount of unreacted zirconium in the solution that reacton had completed was 0.2 and 10%. As the pH was increased to 1.4 by NH4OH theresulting precipitates were the mixtures of the basic zirconium sulfate and the zirconium hydroxide although the precipitates were recovered completely. The thermal decomposition behavior of this sample has been examined by thermal analysis(TG-DTA), X-ray diffraction study, infrared spectroscopy and sulfur analysis. As a result, it was found that the precipitates have perfectly been decomposed at 85$0^{\circ}C$ accompanying to the release of a molecule of water below 25$0^{\circ}C$ and 85% sulfate at about $600^{\circ}C$. The thermally decomlposed products were initially amorphous phase, which were become metastable tetragonal phase with increment of temperature and finally transformed to the stable monoclinic phase at 100$0^{\circ}C$.

• 대한화학회지
• /
• 제7권2호
• /
• pp.96-105
• /
• 1963

The weight decrease curves of 18 kinds of polymers have been measured by thermobalance at the same condition where temperature is increased $1^{\circ}C$ per minutes under nitrogen or air atmosphere. The curves are further differentiated to obtain rate curve of weight decrease. Those curve offer a method to compare relative thermal stability, effects of oxygen or modes of thermal degradation of polymers qualitatively. The curves could be classified into following four types: Polystyrene, polymethylmethacrylate and acetal polymer belong to the first type. Those polymers depolymerize mainly into corresponding monomers, weight decrease curves are steepy up to perfect vaporization of polymers and rate curves show a relatively sharp peak. (Type I) Polyvinyl chloride represents the second type. This polymer decomposes with splitting off of hydrogen chloride. The thermogravimetric curve rises rapidly at first, then level off at the moderate weight decrease and gradually rises. Polyvinyl acetate also belongs to this class. (Type II) The modification of the second type is represented by polyester. The curve at the early stage is less steep, the leveling off at the next stage is less clear and the final rising of the curve is steeper than the normal second type. Polyamide, polyurethane, and polycarbonate belong to this type. (Type II') The thermal decomposition of the third type polymers is more complex than that of others. Various irregular chain scissions including side chain splitting and depolymerization to monomers occur simultaneously. The weight of the polymer decreases gradually and the rate curve does not show sharp peaks. Polyvinyl alcohol and diene polymers belong to this type. (Type III) Generally, polycondensation polymers are more stable toward heat than addition polymers and polymers having aromatic nucleus show good thermal stability. Polymers having tertiary carbon atoms such as polystyrene or polypropylene and acetal resin start decomposition under airatmosphere at the temprature below $50^{\circ}C$ or more of the temperature where the polymers start decomposition under nitrogen atmosphere.

• 한국화재소방학회논문지
• /
• 제14권1호
• /
• pp.8-12
• /
• 2000

면화류의 열적특성을 조사하기 위하여 시차주사열량계(DSC, Differential Scanning Calorimeter) 및 열중량 분석기(TGA, Thermogravimetric Analysis)를 이용하여 온도에 따른 발열개시온도, 무게감량 등을 조사하였으며, 발화온도 측정방법 중 정온법을 이용하여 요오드가가 각기 다른 유지류에 침윤된 면화류의 발차거동을 조사하였다. 이때 발화온도 측정장치의 반응용기 내부로의 공기 기류의 존재 여부에 따른 발화거동을 함께 조사하였다. 연구결과 합성섬유의 분해온도 폭이 순면인 천연섬유에 비하여 다소 넓음을 알 수 있었다. 한편 발화개시온도의 경우 공기를 주입하지 않는 경우에는 유지의 침윤량 증가에 따라 두 시료 모두 상승하였으나, 공기를 주입하는 경우에는 유지의 침윤량 증가에 따라 상당히 낮아지고 있으며, 특히 건성유를 침윤시킨 경우에는 급속히 감소하고 있음을 확인할 수 있었다.

• 공업화학
• /
• 제28권2호
• /
• pp.214-220
• /
• 2017

결정화/응집(drowning-out/agglomeration, D/A) 공정을 이용하여 평균 입도 $550{\mu}m$인 구형 Al/RDX/AP 에너지 복합체를 제조하였다. SEM과 X-선 분광분석을 이용해 복합체의 표면 구조와 Al의 분포를 분석하였다. 열분석 결과 D/A 공정에 의해 제조된 Al/RDX/AP 복합체는 물리적 혼합에 의한 복합체와 비교하여 분해 개시 온도가 약 $50^{\circ}C$ 정도 낮아졌으며, 동시에 활성화 에너지의 증가에 의해 열적 안정성도 상승하는 것으로 확인되었다. AP의 1차 분해 구간에서는 물리적 혼합과 D/A 공정에 의한 복합체 모두 Prout-Tompkins 모델에 의해 잘 모사되었다. 그러나 AP의 2차 분해 구간에서는 물리적 혼합에 의해 제조된 복합체는 zero-order 모델로 해석되는 반면, D/A 공정에 의해 제조된 복합체는 contracting volume 모델로 해석됨을 알 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1201-1204
• /
• 2004

This paper suggests a DCS (Distributed Control System) model for steam temperature system of the thermal power plant. The model calculated within sectional range is linear. In order to calculate mathematical models, the system is partitioned into two or three sectors according to its thermal conditions, that is, saturated water/steam and superheating state. It is divided into three sections; water supply, steam generation and steam heating loop. The steam heating loop is called 'superheater' or steam temperature system. Water spray supply is the control input. A first order linear model is extracted. For linear approach, sectional linearization is achieved. Modeling methodology is a decomposition-synthetic technique. Superheater is composed of several tube-blocks. For this block, linear input-output model is to be calculated. Each tiny model has its transfer function. By expanding these block models to total system, synthetic DCS linear models are derived. Control instrument include/exclude models are also considered. The resultant models include thermal combustion conditions, and applicable to practical plant engineering field.

• Steel and Composite Structures
• /
• 제46권5호
• /
• pp.637-647
• /
• 2023

Nonlinear free vibration and stability responses of a carbon nanotube reinforced composite beam under temperature rising are investigated in this paper. The material of the beam is considered as a polymeric matrix by reinforced the single-walled carbon nanotubes according to different distributions with temperature-dependent physical properties. With using the Hamilton's principle, the governing nonlinear partial differential equation is derived based on the Euler-Bernoulli beam theory. In the nonlinear kinematic assumption, the Von Kármán nonlinearity is used. The Galerkin's decomposition technique is utilized to discretize the governing nonlinear partial differential equation to nonlinear ordinary differential equation and then is solved by using of multiple time scale method. The critical buckling temperatures, the nonlinear natural frequencies and the nonlinear free response of the system is obtained. The effect of different patterns of reinforcement on the critical buckling temperature, nonlinear natural frequency, nonlinear free response and phase plane trajectory of the carbon nanotube reinforced composite beam investigated with temperature-dependent physical property.

• 청정기술
• /
• 제22권3호
• /
• pp.190-195
• /
• 2016

회전식 소각공정은 고에너지 물질의 폐기처리를 위해 현재 상용화 되고 있는 기술로 열풍을 이용하여 대상물질을 열분해하는 공정이며 TNT, RDX 및 Composition B를 통한 열분해 공정의 사전연구가 진행되었다. 본 연구의 대상물질은 나이트로셀룰로스(nitrocellulose, NC)와 나이트로글리세린(nitroglycerine, NG)의 혼합물인 더블베이스 추진제(M8)로 선정하였다. M8 추진제의 열분해 반응은 응축상 반응(condensed phase reaction, CPR)과 기체상 반응(gas phase reactions, GPRs)로 구성되어 있다. CPR의 경우 흡열반응으로 4가지 화합물을 생성하며, GPRs의 경우 59개의 가스화합물 및 365개의 흡열·발열 반응으로 구성되어 있다. 본 연구는 gPROMS 소프트웨어를 이용하여 관형반응기의 수학적 모델링을 완성하였으며, 운전온도 및 유속 변화에 따른 케이스스터디를 진행하였다. 상대적으로 낮은 유속 및 높은 공정온도는 반응기의 내부온도(Case3: 953 K, Case6: 1300 K)를 상승 시켰으며, CO₂와 H₂O 몰농도 값 상승을 통해 완전연소율이 증가하는 것을 확인할 수 있었다. 본 연구 내열형 소각로 설계, 운전조건을 도출하는데 있어 기초 자료로 활용될 수 있을 것으로 사료된다.

• 한국대기환경학회지
• /
• 제24권3호
• /
• pp.329-335
• /
• 2008

Volatile organic compounds emitted to the atmosphere can cause adverse effects on human health and participate in photochemical smog formation reactions. The destruction of a series of VOCs has been carried out by non-thermal plasma in other researches. And the characteristic of non-thermal plasma was operated at atmospheric pressure and low temperature. A new type non-thermal plasma reactor was investigated combined Glidarc plasma with water jet in this research. Also, it was found that the water-jet had an significant effect on the toluene removal efficiency. But too much water content does not favor toluene decomposition by decreasing of reaction temperature. The input toluene concentration, gas flow rate, water flow rate and specific energy input were used as experiment variables. The toluene removal efficiency, energy efficiency and specific energy input were 75.3%, 146.6 g/kWh and $1.12kWh/m^3$ at a water flow rate of 100 mL/min.

• 한국태양에너지학회 논문집
• /
• 제37권2호
• /
• pp.13-22
• /
• 2017

Two-step water splitting thermochemical cycle with $CeO_2/ZrO_2$ foam device was investigated by using a solar simulator composed of 2.5 kW Xe-Arc lamp and mirror reflector. The hydrogen production of $CeO_2/ZrO_2$ foam device depending on heat recovery of Thermal-Reduction step and Water-Decomposition step was analyzed, and the hydrogen production of $CeO_2/ZrO_2$ and $NiFe_2O_4/ZrO_2$ foam devices was compared. Resultantly, the quantity of hydrogen generation increased by 52.02% when the carrier gas of Thermal-Reduction step is preheated to $200^{\circ}C$ and, when the $N_2/steam$ is preheated to $200^{\circ}C$ in the Water-Decomposition step, the quantity of hydrogen generation increased by 35.85%. Therefore, it is important to retrieve the heat from the highly heated gases discharged from each of the reaction spaces in order to increase the reaction temperature of each of the stages and thereby increasing the quantity of hydrogen generated through this.