• 한국항공우주학회지
• /
• 제46권4호
• /
• pp.306-314
• /
• 2018

차세대 중형위성에 탑재되는 2축 짐벌형 X-밴드 안테나는 대용량 영상정보 송신 안테나로, 위성의 자세와 궤도 운동과 무관하게 자세 및 안테나 지향각에 따라 방위각 축과 고각축이 동시에 회전 구동하여 지상안테나를 지향하게 된다. 상기 안테나는 위성체 외부에 극심한 온도차를 보이는 궤도 열환경에 노출되며, 안테나 및 주요 구성품이 허용온도 범위 내를 유지할 수 있도록 열설계를 해야 한다. 본 논문에서는 2축 짐벌형 X-밴드 안테나의 열설계 유효성을 해석적으로 요구조건을 만족함을 확인하였으며, 시스템 열진공 시험 조건해석 및 궤도 운용조건에서의 열해석을 수행하여 히터 용량 및 듀티 사이클을 도출하였다. 아울러, 상기 안테나의 핵심 주요 구성품에 대한 허용온도 요구조건 충족 여부를 확인하였다.

• 항공우주시스템공학회지
• /
• 제10권2호
• /
• pp.1-6
• /
• 2016

The thermal analysis of electronic equipment is required to predict the reliability of electronic equipment being loaded on a satellite. The transient heat transfer of electronic equipment that was developed recently has been generated using a large-scale integration circuit. If there is a transient heat transfer between EEE(Electric, Electronic and Electro mechanical) parts, it may lead to failure the satellite mission. In this study, we performed the thermal design and analysis for reliability of APD(Antenna Pointing Driver) electronics for activation of a spaceborne X-band 2-axis antenna. The EEE parts were designed using a thermal mathematical model without the thermal mitigation element. In addition, thermal analysis was performed based on the worst case for verifying the reliability of EEE parts. For the thermal analysis results, the thermal stability of electronic equipment has been demonstrated by satisfying the de-rating junction temperature.

• 전기의세계
• /
• 제25권6호
• /
• pp.69-73
• /
• 1976

Thd idle channel noise on FDM-microwave communication system is increasing because of the up-grade to wide-band loading. The thermal noise on receiver of microwave radio is measured according to their channel slot frequencies, low, meddle and high slots on the base band, from 60 channels to 960 channels. And suggested a consideration for system engineering, to reduce the thermal noise from radio microwave receivers, so as to improve signal to noise ratio.

• 환경영향평가
• /
• 제9권3호
• /
• pp.177-183
• /
• 2000

The Landsat Thematic Mapper (TM) has suggested that spatial and spectral characteristics would be suited to evaluate water quality of lake. But, TM has not been commonly used for the analysis of in-land water quality, such as surface water temperature, chlorophyll-a, suspended sediments, and Secchi depth in domestic research. This paper summarizes the analysis of Landsat 5 - TM image collected on 22 Feb 1996 for evaluation of chlorophyll-a and surface temperature in the Lake Soyang. And, field measurements collected in the Lake Soyang were used to obtain water optical algorithms for calibration of satellite data. It is concluded that we can assess chlorophyll-a with remote sensing reflectance and surface temperature with thermal band in lake Soyang. However, surface temperature calculated with thermal band of Landsat TM are underestimated. Relationship between remote sensing reflectance and chlorophyll-a using the ratio of TM band 1 and band 3 is as follows; Y = 17.206 - 6.4711 * (Rrs(band1) / Rrs(band3)) $R^2$=0.8762 and, using the ratio of TM band 1 and band 2 as follows; Y = 57.77 - 35.771 * (Rrs(band1) / Rrs(band2)) $R^2$=0.8317.

• 한국표면공학회지
• /
• 제48권6호
• /
• pp.260-268
• /
• 2015

The thermal barrier coating (TBC) for inner wall of liquid-fuel rocket combustor consists of NiCrAlY as bonding layer and $ZrO_2$ as a top layer. In most case, the plasma spray coating is used for TBC process and this process has inherent possibility of cracking due to large difference in thermal expansion coefficients among bonding layer, top layer and metal substrate. In this paper, we suggest crack-free TBC process by using a precise electrodeposition technique. Electrodeposited Ni-P/Cr double layer has similar thermal expansion coefficient to the Cu alloy substrate resulting in superior thermal barrier performance and high temperature oxidation resistance. We studied the effects of phosphorous concentrations (2.12 wt%, 6.97 wt%, and 10.53 wt%) on the annealing behavior ($750^{\circ}C$) of Ni-P samples and Cr double layered electrodeposits. Annealing temperature was simulated by combustion test condition. Also, we conducted SEM/EDS and XRD analysis for Ni-P/Cr samples. The results showed that the band layers between Ni-P and Cr are Ni and Cr, and has no formed with heat treatment. These band layers were solid solution of Cr and Ni which is formed by interdiffusion of both alloy elements. In addition, the P was not found in it. The thickness of band layer was increased with increasing annealing time. We expected that the band layer can improve the adhesion between Cr and Ni-P.

• 전자공학회논문지A
• /
• 제31A권5호
• /
• pp.1-9
• /
• 1994

In this paper, we analyzed the performances for FH/CPFSK system with limiter-discriminator detection and integrate-and-dump post-detection filtering under thermal noise and partial-band jamming noise. And,we considered intersymbol interference-related SNR and differential phase parameters for all eight of the possible adjacent bit data patterns, FM noise clicks for evaluating FH/CPFSK and CPFSK Systems. In result, the optimum modulation index h was 0.7 and the optimum value of bandwidth-time product D was 1.0 Next, when we considered the thermal noise under the partial-band jamming, the thermal noise significantly influenced the error probability of system below 20dB approximately but could ignore above 20dB.

• 전자공학회논문지A
• /
• 제33A권6호
• /
• pp.42-51
• /
• 1996

Performance analysis of FH/CPFSK system with liiter-discriminator detection and integrate-dump post-detection filtering under the thermal noise and the partial-band noise jamming on the rayleigh fading channel have been analyzed. The thermal noise and partial-band noise jamming, rayleigh fading, intersymbol interference for all eight of the possible adjacent bit data patterns, and FM noise click for evaluating systems have been considered. Also optimum parameters to improve performance of FH/CPFSK system have been obtained and validities for AMPS and CDMA system of land-mobile-communication system through computer simulation have been proved.

• 한국통신학회논문지
• /
• 제21권7호
• /
• pp.1787-1802
• /
• 1996

In this paper, the performance for FH/CPFSK system with limiter-discriminator detection and integrage-and-dump post-detection filtering under thermal noie, partial-band noise jamming and rayleigh fading have been analyzed. The method of hard-decision diversity of which the transmitter repeated L times on different hops for each data symbol in a way to mutigate the effects of the jamming has been applied, and the receiver has been combined the L chips. Also, error-correcting code have been applied for improving performance of system. The thermal noise and partial-band noise jamming, intersymbol interference for all eight of the possible adjacent bit data patterns, and FM noise click for evaluating systems have been considered. Also optimum parameters to improve performance of FH/CPFSK system have been obtained and validities have been proved through computer simulation.

• 대기
• /
• 제25권1호
• /
• pp.51-66
• /
• 2015

This study was conducted to perform various sensitivity experiments using WRF (Weather Research and Forecasting) model in order to determine the effects of terrains of the Korean Peninsula and the land-sea thermal contrast on the formation and development of the convergent cloud band for the cases of 1 February 2012. The sensitivity experiments consist of the following five ones: CNTL experiment (control experiment), and TMBT experiment, BDMT experiment and ALL experiment that set the terrain altitude of Taeback Mountains and Northern mountain complex as zero, respectively, and the altitude of the above-mentioned two mountains as zero, and LANDSEA experiment that set to change the Korean Peninsula into sea in order to find out the land-sea thermal contrast effect. These experiment results showed that a cold air current stemming from the Siberian high pressure met the group of northern mountains with high topography altitude and was separated into two air currents. These two separated air currents met each other again on the Middle and Northern East Sea, downstream of the group of northern mountains and converged finally, creating the convergent cloud band. And these experiments suggested that the convergent cloud band located on the Middle and Northern East Sea, and the cloud band lying on the southern East sea to the coastal waters of the Japanese Island facing the East Sea, were generated and developed by different dynamical mechanisms. Also it was found that the topography of Taeback Mountains created a warm air advection region due to temperature rise by adiabatic compression near the coastal waters of Yeongdong Region, downstream of the mountains. In conclusion, these experiment results clearly showed that the most essential factor having an effect on the generation and development of the convergent cloud band was the topography effect of the northern mountain complex, and that the land-sea thermal contrast effect was insignificant.

• 한국항공우주학회지
• /
• 제31권2호
• /
• pp.96-102
• /
• 2003

통신방송위성 Ka-대역 기술인증모델(EQM)탑재체의 열진공시험을 위한 기계지상지원장비 패널의 열설계를 수행하고 열진공 챔버내에서의 성능시험을 위한 열환경을 수치적 방법으로 예측하였다. 탑재체 패널의 히트파이프 배열 설계 검증을 위한 열해석은 SINDA를 사용하였다. 개발된 16개 히트파이트 배열은 Ka-대역 중계기 전장품들의 성능시험을 위해 적절하게 설계되었다. 고온 성능시험은 패널 외부 면재에 가해지는 열유속이 265W/㎡ 일 때 수행되고, 저온 성능시험은 패널 외부로부터 열유입이 없을 때 수행된다. 히트파이프의 최대 열수송 용량은 2723 W-cm로 예측되었다.