• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.251-256
• /
• 2001

Shrinkage during the curing and drying of concrete is unavoidable and results in many cracks. Shrinkage strips reduce effectively shrinkage stresses and minimize shrinkage cracks by being left open for a certain time during construction allow a significant part of the shrinkage to occur without inducing stresses. This study verifies the effectiveness of shrinkage strips and provides the guide for construction of such strips.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.827-832
• /
• 2001

Shrinkage during the curing and drying of concrete is unavoidable and results in many cracks. Shrinkage strips reduce effectively shrinkage stresses and minimize shrinkage cracks by being left open for a certain time during construction to allow a significant part of the shrinkage to occur without inducing stresses. This study verifies the effectiveness of shrinkage strips and provides the guide for construction of such strips.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.193-197
• /
• 2001

The growth in concrete structures repair has prompted major efforts to develop high early strength concrete. The internal or external restraint of thermal shrinkage movements could thus generate tensile stresses in concrete structures if it is used rapid setting repair concrete. Restrained shrinkage and thermal stresses could produce microcracks in concrete which increase its permeability and accelerate its long-term deterioration under weathering and load effects. This study aims at evaluation and increase of the engineering properties of high early strength concrete using regulated set cement.

• 한국안전학회지
• /
• 제23권5호
• /
• pp.84-90
• /
• 2008

The occurrence of longitudinal cracking in concrete deck of box girder bridge is affected by many factors, but the most important factors are the shrinkage and thermal gradient of deck slabs. In this study, therefore, the tensile stresses at the bottom of deck were calculated from the experimental data(autogeneous shrinkage, drying shrinkage, and thermal gradient of deck slab). Also, the possibility of longitudinal cracks at bottom of deck was estimated. For this purpose, full-scale box girder segments have been fabricated and tested. The thermal gradients and shrinkage strains of deck slabs were measured after placement of concrete. Also, analytic program was conducted for the evaluation of longitudinal cracking in bridge deck considering differential shrinkage induced from non-uniform moisture distributions in concrete.

• 콘크리트학회논문집
• /
• 제14권3호
• /
• pp.382-391
• /
• 2002

본 연구에서 초기재령 콘크리트의 크리프 특성을 고려한 단면 내 온도 및 수축응력을 구하는 3차원 유한요소 해석 프로그램을 개발하기 위한 수치해석 절차에 관하여 정립하였다. 최근 들어 구조물의 노후화에 따른 콘크리트의 내구성에 대한 관심이 고조되고 있고, 초기재령에서 발생하는 균열은 구조물의 내구성 및 사용성과 같은 장기적인 성능에 큰 영향을 미친다. 많은 토목 기술자들이 초기재령 콘크리트의 체적변화에 의한 응력 및 균열 문제를 심도 깊게 다루지 않는 데는 장기적인 내구성과 사용성에 대한 인식이 부족하고, 경화가 진행되는 콘크리트의 체적변화는 매우 복잡한 영향인자를 고려해야 되기 때문이다. 또한 초기재령 콘크리트의 체적변화로 인한 응력을 예측하는 기존 프로그램들은 주로 수화열에 의한 온도 및 열응력 해석에 국한되거나, 수화과정과 연계되지 않은 습도분포에 의한 수축 응력해석을 대상으로 한다. 따라서 본 연구에서는 초기재령 콘크리트의 체적 변화에 의한 모든 응력 요소를 하나의 통합적인 해석 시스템으로 구성하여, 초기재령 콘크리트의 균열 제어 수단으로 활용하고자 한다. 본 연구는 초기재령 콘크리트의 온도 및 수분에 관련된 재료 물성 뿐 만 아니라 역학적 특성 등 모든 재료 물성을 수화도에 기초하여 모델링하였다. 또한 콘크리트가 강성을 가지는 시점부터의 초기재령 크리프 실험을 수행하고, 그 결과로부터 수화도에 따른 크리프 거동을 모델링하여 해석 프로그램에 반영하였다. 개발된 해석프로그램을 이용하여 수치해석 결과와 실험결과를 비교하여 그 타당성을 검증하고, 해석 예제를 통하여 각 변형률 성분에 의한 잔류 응력의 변화 양상을 비교, 분석하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.781-784
• /
• 2005

Concrete structures often present volumetrical changes particularly due to thermal and moisture related shrinkages. Volumetric instability is detrimental to the performance and durability of concrete structures because structural elements are usually restrained. These restrained shrinkages develope tensile stresses which often results in cracking in combination with the low fracture resistance of concrete. Early-age defects in high-performance concrete due to thermal and autogenous deformation shorten the life cycle of concrete structures. Thus, it is necessary to examine the behavior .of early-age concrete at the stages of design and construction. The purpose of this study was to propose a shrinkage models of VES-LMC (very-early strength latex-modified concrete) at early-age considering thermal deformation and autogenous shrinkage.

• 콘크리트학회논문집
• /
• 제13권4호
• /
• pp.362-370
• /
• 2001

콘크리트포장 보수공사에서 조기교통개방을 위해 현재 국내에서는 초속경시멘트를 사용하고 있으나 이는 초기의 빠른 수화반응과 내.외부적 구속으로 인한 온도수축 및 건조수축이 발생하여 콘크리트포장에 인장응력을 유발한다. 구속으로 인한 수축은 콘크리트내에 균열을 발생시켜 투수성을 증가시키고 장기적으로는 내구성을 약화시킨다. 콘크리트보강재료로서 섬유는 이러한 균열을 제어하는데 효과적이다. 본 연구에서는 국내에서 사용되고 있는 3종류의 초속경시멘트의 내구성을 평가하였고 내구성을 증진시키기 위하여 콘크리트 보강 섬유를 혼입하였으며 일반 콘크리트와 섬유보강 콘크리트를 비교.분석하였다. 실험결과 조기교통개방콘크리트에서 섬유의 혼입은 일반 콘크리트보다 내구성을 증진시키는데 우수한 효과를 나타내었다.

• 산업기술연구
• /
• 제25권B호
• /
• pp.73-80
• /
• 2005

Durability of concrete structures is seriously compromised by cracking at early-age concretes, particularly in high-strength or high-performance concrete structures. Since early-age cracking is influenced by various factors that affect the hydration process, early-age shrinkage and stress/strain development, the behavior at early-age is highly complex and no rational methodologies for its control have yet been established. Concrete structures often present volumetrical changes particularly due to thermal and moisture related shrinkages. Volumetric instability is detrimental to the performance and durability of concrete structures because structural elements are usually restrained. These restrained shrinkages develope tensile stresses which often results in cracking in combination with the low fracture resistance of concrete. Early-age defects in high-performance concrete due to thermal and autogenous deformation shorten the life cycle of concrete structures. Thus, it is necessary to examine the behavior of early-age concrete at the stages of design and construction. The purpose of this study was to propose a shrinkage models of VES-LMC (very-early strength latex-modified concrete) at early-age considering thermal deformation and autogenous shrinkage.

• Journal of Welding and Joining
• /
• 제10권1호
• /
• pp.20-34
• /
• 1992

Characteristics of two correcting methods, a new Autogeneous GTAW heating (TIG) method and the conventional GMAW bead-on plate welding(MIG) method, for distorted aluminum fabrication structures were studied. As a result of microscopic study of Autogeneous GTAW heating and GMAW bead-on plate welding areas, porosities in weld metal and surface cracks in local heating zone were found. Through the mechanical tests, it was verified that porosities decrease tensile strength and surface of distortion, angular displacement and transeverse shrinkage were measures and compared. In order to investigate changes of material properties in heating area and cause of defects such thermal stresses were calculated by ADINA. Through the computations of transient thermal stresses and microscopic observation of fracture surface, thermal stress was found to be the cause of crack during Autogeneous GTAW heating.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.245-248
• /
• 2005

During manufacturing thick composite cylinders, large thermal residual stresses are developed and induce catastrophic interlaminar failures. Since the residual stresses are dependent on many process parameters, such as temperature distribution during cure, cure shrinkage, winding tension, and migration of fibers, calculation of the residual stresses is very difficult. Therefore a radial-cut method have been used to measure the residual stresses in the composite cylinders. But the conventional radial-cut method needs to know numerous material properties which are not only troublesome to obtain but also vary with change of fiber arrangement during consolidation. In this paper, a new radial-cut method with cut-cylinder-bending test was proposed and the measured residual stresses were compared with calculated thermal residual stresses. It was found that the new radial-cut method which does not need to know any of material properties gave better estimation of residual stresses regardless of radial variation of material properties. Additionally, interlaminar tensile strength could be obtained by the cut-cylinder-bending test.