• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.5
• /
• pp.227-234
• /
• 2006

Microstructures of free surface and interior of glass-ceramics obtained by heat treating silicate glass specimen containing electric arc furnace dust(EAF dust) were observed. The crystallization temperature, $T_c$ of glassy specimen was measured around $850^{\circ}C$ from the result of different thermal analysis so heat treatment temperature to obtain glass-ceramic specimen was selected as $950^{\circ}C$ for 1 hr. Glass specimens containing 50 wt% dust were amorphous, while glass specimens containing 70 wt% dust showed spinel crystal peaks in XRD results. In case of glass-ceramic specimens, spinel crystalline phase was appeared with willemite, and willemite crystal peak intensity increased with increasing dust contents. The fractured surface of glass specimens containing 50 wt% dust was smooth like mirror surface, but that containing 70 wt% dust showed spinel crystals of 10 ${\mu}m$ size in glass matrix. In case of glass-ceramic specimens, ZnO crystal particles of $2{\sim}5{\mu}m$ size were produced in free surface and glassy phase, spinel and willemite crystal phases existed in interior. There were no crystals in glasses containing 50 wt% dust, while glass containing 70 wt% dust had 14 vol% crystals. Crystallinity of glass-ceramic specimens containing 50 and 70 wt% dust were 19 and 43%, respectively. When microstructures of glass and glass-ceramic specimens were observed through SEM after TCLP experiment, glass specimens showed flaking phenomenon while glass-ceramic specimens showed a slight corrosion evidence without any cracks.

• Korean Chemical Engineering Research
• /
• v.49 no.2
• /
• pp.244-249
• /
• 2011

In this study, performance and economic analysis of 500 MWe coal-fired power plant with $CO_{2}$ capture process was performed. For this purpose, chemical absorption method which is commercially available and most suitable for thermal power plant was studied and a criteria for technical and economic assessment of power plants suggested by IEA Greenhouse Gas R&D Programme was used. And we performed the sensitivity analysis focused on regeneration energy which exceed half of the total capture energy. Based on MEA(Monoethanoleamine) as a main chemical solvent and 3.31 GJ/ton$CO_{2}$ regeneration energy in the stripper, net power efficiency was reduced from 41.0% (no capture) to 31.6%(with capture) and the cost of $CO_{2}$ avoided was estimated 43.3 $/ton$CO_{2}$. And in case of 2.0 GJ/ton$CO_{2}$ regeneration energy, the cost of $CO_{2}$ avoided was calculated as 36.7 $/ton$CO_{2}$.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.4
• /
• pp.63-69
• /
• 1999

The electrical properties of rf-magnetron sputtered $Ba_{0.5}Sr_{0.3}TiO_3$ (BST) capacitors were investigated by varying annealing temperature and atmosphere of the rapid thermal annealing (RTA). The electrical properties of Pt/BST/Pt capacitors were found to strongly depend on the RTA condition. It seems that the dependence of the electrical properties of the Pt/BST/Pt capacitors on the RTA condition is related to the oxygen vacancies in BST thin films. In order to clarify the relation between the oxygen vacancies and the electrical properties of Pt/BST/Pt capacitors, we have examined the two different annealing methods. One annealing method was performed in $O_2$ gas and the other was done in $O_2$-plasma at the same condition of 450$^{\circ}C$, 20 mtorr. It was found that the leakage current densities of $O_2$-plasma annealed capacitor were much lower than those of $O_2$ annealed capacitor. The dielectric constants of $O_2$ annealed capacitor decreased about 14% comparing with those of as-deposited. In contrast, there was no decrease in the dielectric constant of $O_2$-plasma annealed. These results indicate that $O_2$-plasma annealing is very effective in compensation the oxygen vacancies in BST thin films. It can be also concluded that the oxygen vacancies greatly affect the electrical properties of Pt/BST/Pt capacitors.

• Journal of Korean Medicine Rehabilitation
• /
• v.19 no.3
• /
• pp.15-32
• /
• 2009

Objectives : The purpose of this Study was to identify the effect of Dokhwalgisaeng-tang(Duhuoqisheng-tang) and Jungsongouhyul pharmacopuncture on pain control and nerve regeneration after crush injury in rat sciatic nerve. Methods : Neuropathic pain was induced by crush-induced model of right sciatic nerve. Animal groups were divided as follows; Group I: no treatment control group, Group II : experimental group treated with Dokhwalgisaeng-tang(Duhuoqisheng-tang), Group III : experimental group treated with Jungsongouhyul pharmacopuncture, and Group IV : experimental group treated with Dokhwalgisaeng-tang(Duhuoqisheng-tang) and Jungsongouhyul pharmacopuncture. To evaluate pain intensity, each group was observed paw withdrawal threshold and immunoreactivity on the c-fos before and after respective treatments in five hours, first, third, and fifth day. To evaluate nerve regeneration, those were observed SFI(Sciatic Functional Index) and GAP-43(Growth Associated Protein 43) after each treatment in seventh and thirteenth day. Results : 1. Paw withdrawal threshold to the mechanical stimuli made the significant difference between group IV and the control group after five days of the experiment. 2. Paw withdrawal threshold to the thermal stimuli made the significant difference between group I and III, I and IV, II and IV. 3. In immunohistochemical response of c-fos, as time passes, the immunoreactivity of all groups was decreased gradually. Especially, group IV was observed the lowest after three days. 4. The differences of sciatic function indexes in each group were significantly between group I and III, I and IV, II and IV after 14 days, and between group I and III, I and IV, II and IV, III and IV after 21 days. 5. In immunohistochemical response of GAP-43, all groups had higher GAP-43 immunoreactivity at the 14 days from post-injury and group IV showed highest immunoreactivity. Conclusions : Based on above the results, it is proposed that Dokhwalgisaeng-tang(Duhuoqisheng-tang) and Jungsongouhyul pharmacopuncture may be helpful as a treatment in neuropathic pain and nerve regeneration in rat model.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.2
• /
• pp.79-84
• /
• 2018

PURPOSE. All-ceramic restorations required extensive tooth preparation. The purpose of this in vitro study was to investigate a minimally invasive preparation and thickness of monolithic zirconia crowns, which would provide sufficient mechanical endurance and strength. MATERIALS AND METHODS. Crowns with thickness of 0.2 mm (group 0.2, n=32) or of 0.5 mm (group 0.5, n=32) were milled from zirconia and fixed with resin-based adhesives (groups 0.2A, 0.5A) or zinc phosphate cements (groups 0.2C, 0.5C). Half of the samples in each subgroup (n=8) underwent thermal cycling and mechanical loading (TCML)(TC: $5^{\circ}C$ and $55^{\circ}C$, $2{\times}3,000cycles$, 2 min/cycle; ML: 50 N, $1.2{\times}10^6cycles$), while the other samples were stored in water ($37^{\circ}C/24h$). Survival rates were compared (Kaplan-Maier). The specimens surviving TCML were loaded to fracture and the maximal fracture force was determined (ANOVA; Bonferroni; ${\alpha}=.05$). The fracture mode was analyzed. RESULTS. In both 0.5 groups, all crowns survived TCML, and the comparison of fracture strength among crowns with and without TCML showed no significant difference (P=.628). Four crowns in group 0.2A and all of the crowns in group 0.2C failed during TCML. The fracture strength after 24 hours of the cemented 0.2 mm-thick crowns was significantly lower than that of adhesive bonded crowns. All cemented crowns provided fracture in the crown, while about 80% of the adhesively bonded crowns fractured through crown and die. CONCLUSION. 0.5 mm thick monolithic crowns possessed sufficient strength to endure physiologic performance, regardless of the type of cementation. Fracture strength of the 0.2 mm cemented crowns was too low for clinical application.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.9
• /
• pp.1148-1153
• /
• 2008

For the effective use of red seabream, the texture between red seabream muscles cultured by feeding and starving were compared. Moisture and crude lipid contents of red seabream muscle cultured by starving (RCS) were 72.7% and 3.7%, respectively, which was 3% higher in the moisture compared to that of red seabream muscle cultured by feeding (RCF), while 3% lower in the crude lipid. The hardness of RCS was $0.93\;kg/cm^2$, which was higher than that ($0.47\;kg/cm^2$) of RCF. No differences in total collagen content, acetic acid-solublized collagen content, its thermal denaturation temperature and SDS-PAGE patterns between RCS and RCF were found. The results suggested that the difference in muscle texture between RCS and RCF was probably due to the difference of lipid content.

• Korean Journal of Food Science and Technology
• /
• v.38 no.3
• /
• pp.385-391
• /
• 2006

Physicochemical properties of hydroxypropylated waxy rice starches were investigated to reduce steeping-time of yukwa (Korean oil-puffed rice snack) processing. Swelling power of hydroxypropylated waxy rice starch increased at relatively higher temperature $(60^{\circ}C)$ than native waxy rice starch $(70^{\circ}C)$. Solubility of hydroxypropylated waxy rice starches increased with increasing propylene oxide content. Pasting temperature $(66.3-66.9^{\circ}C)$ and peak viscosity (216-232 RVU) of hydroxypropylated waxy rice starch were higher than those of native starch (179 RVU) and increased with increasing propylene oxide content. DSC thermal transitions of hydroxypropylated waxy rice starches shifted toward higher temperature. Amylopectin melting enthalpy of hydroxypropylated waxy rice starch (8.4-9.2 J/g) was similar to native starch (9.0 J/g). X-ray diffraction patterns of native and hydroxypropylated waxy rice starches showed typical A-type pattern with no significant differences between them, suggesting hydroxypropylation only affected amorphous region. Results suggest hydroxypropylated waxy rice starch is not applicable for yukwa due to low puffing efficiency and dark color.

• Journal of the Korean Chemical Society
• /
• v.51 no.1
• /
• pp.82-92
• /
• 2007

This study investigated the influences of reciprocal peer tutoring strategy and field independencedependence in the instruction enhancing student questions by using weekly reports. Seventh graders (N=152) from a middle school were assigned to WR (weekly reports) and WR-RPT (weekly reports-reciprocal peer tutoring) groups. Students were taught about ‘three states of matter', ‘motion of molecules', and ‘change of states and thermal energy for eighteen class hours and wrote weekly reports six times for the period. The students in the WR-RPT group also conducted reciprocal peer tutoring with the questions of weekly reports which they wrote. The results revealed that the scores of the WR-RPT group were significantly higher than those of the WR group in a conception test regardless of students' field independence-dependence. The field dependent students in the WR-RPT group performed better in an achievement test than those in WR group, while there was no significant difference for the field independent stu dents between the two groups. Additionally, field independent students in each group scored significantly higher than field dependent students in the two tests. Many students, especially having more field independence in the WR-RPT group, perceived WR-RPT positively.

• Clean Technology
• /
• v.12 no.3
• /
• pp.113-127
• /
• 2006

Waste lubricating oil(WLO)s have been recycled as energy source through direct fuel in cement kilns and fossil power plants, or as fuel oils, or re-refined lubricating base oils. In our country, they have been recycled as low grade fuel oil through chemical treatment process. In 2003, extended producer responsibility (EPR) system was adopted from deposit system on sale of lubricating oils in order to promote their recycleing rate. However, our recycling rate of WLOs have been stagnant(below 70%) for last 5 years. And there has been no research work on recycling of WLOs as re-refined base oil until now in this country. Stabilization technology of thermally cracked oils to reduce tar and malodor and to improve their color for production of high grade fuel oil, and a novel process production of high grade re-refined lubricating base oil from WLOs have been developed and commercialized recently in Canada and U.S.A., respectively. Several countries like Australia, Italy, Germany and U.S.A., etc. are encouraging recycling companies to recycle WLOs as re-refined lubricating oil by giving greater subsidies or benefits compared to other recycling methods. They also adopt a policy to purchase re-refined lubricating oil preferentially in the federal or local governments and to recommend consumers to purchase it willingly. Based on the facts that several advanced countries have adopted a policy to recycle WLOs as re-refined base oil for saving of petroleum resource and reduction of environmental pollution, it is right time to be considered that our present policy for recycling of WLOs should be reevaluated and the new policy of their environmental-friendly and sustainable recycling should be established.

• Journal of the Korean Magnetics Society
• /
• v.26 no.3
• /
• pp.76-80
• /
• 2016

CoSiB is the amorphous ferromagnetic material and multilayer consisting of CoSiB and Pd has perpendicular magnetic anisotropic property. PMA has strong advantages for STT-MRAM. Moreover, amorphous materials have two advantages more than crystalline materials: no grain boundary and good thermal stability. Therefore, we studied the magnetic properties of multilayers consisting of the $Co_{75}Si_{15}B_{10}$ with PMA. In this study, we investigated the magnetic property of the [CoSiB (3, 4, 5, and 6) ${\AA}$/Pd(11, 13, 15, 17, 19,and $24{\AA})]_5$ multilayers and found the annealing temperature dependence of the magnetic property. The annealing temperature range is from room temperature to $500^{\circ}C$. The coercivity and the saturation magnetization of the CoSiB/Pd multilayer system have a close association with the annealing temperature. Moreover, the coercivity especially shows a sudden increasing at the specific annealing temperature.