• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2008년도 춘계학술대회
• /
• pp.417-428
• /
• 2008

Designers have to consider voice of customer, process capability, manufacturing standards & condition, manufacturing method, characteristics of products to decide tolerances. Especially, in case of position of hole and pin, designers have to consider process capability to decide tolerances. The traditional position tolerances used in a drawing are theoretical values which are allocated to position under the worst case assembling condition that both hole and pin are the maximum material condition(MMC). However, When the process capability is high, more exact product size can be produced under stable manufacturing condition. larger clearance of hole and pin can be allocated. In this point of view, manufacturer could increase the yield by allocating larger position tolerance than theoretical position tolerance of hole and pin considering process capability.

• 대한안전경영과학회지
• /
• 제11권1호
• /
• pp.75-85
• /
• 2009

Designers have to consider voice of customer, process capability, manufacturing standards & condition, manufacturing method and characteristics of products to decide tolerances. Especially, in case of position of hole and pin, designers have to consider process capability to decide tolerances. The traditional position tolerances used in a drawing are theoretical values which are allocated to position under the worst case assembling condition that both hole and pin are the maximum material condition(MMC). However, when the process capability is high, more exact product size can be produced under stable manufacturing condition. Larger clearance of hole and pin can be allocated. In this point of view, manufacturer could increase the yield by allocating larger position tolerance than theoretical position tolerance of hole and pin considering process capability.

• KSBB Journal
• /
• 제10권5호
• /
• pp.482-490
• /
• 1995

The relationship between pressure drop and liquid flow rate, for an axial and a radial flow chromatographic column packed with compressible porous media was theoretically analyzed using modified Kozeny-Carman equation. The results were compared with experimental observations obtained using compressible DEAE-agarose as a model medium. At 2-9 psi range studied, the theoretical derivation accounting for 'gel compression' effect predicted simple Langmuirian type response of volumetric flow rate to changes in pressure drop. On the other hand, the experimental response was more or less sigmoidal. At the same pressure drop, radial column showed 2-3 times higher flow rates than those of axial column both theoretically and experimentally. Using r-HBsAg crude extract, protein resolution effects between the two types of columns at different flow rates were compared side-by-side. It turned out that, though general chromatographic behavior was very similar, axial column was somewhat superior in terms of r-HBsAg recovery yield and specificity. However, the number of theoretical plates analysis indicated the protein resolution effects were comparable.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 제2회 박판성형심포지엄 논문집 박판성형기술의 현재와 미래
• /
• pp.156-163
• /
• 1998

During an actual forming operation, a material may undergo considrably large changes in strain path, and these changes can significantly alter the forming limits. So, in this study, modified forming limit curves(FLCs) in complex strain path are determined with specially designed jig to give test specimens with desired prestrains in uniaxial or biaxial deformation mode. In another part of present study, theoretical prediction of FLCs is attempted with MK's theory and Hosford's yield criterion to give forming limit curves in positive minor strain region and with Hill's local necking theory in negative minor strain region. Comparison of these theoretical results with experimental ones will be mentioned for both linear and complex strain path.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 추계학술대회논문집; 한국과학기술회관, 8 Nov. 1996
• /
• pp.237-242
• /
• 1996

A theoretical formulation for the analysis of free vibration of clamped-free cylindrical shells with plates attached at arbitrary axial positions was derived and it was programed to get the numerical results which yield natural frequencies and mode shape of the combined system of plate and shells. The frequencies and mode shapes from theoretical calculation were compared with those of commercial finite element code, ANSYS as well as modal test in order to validate the formulation. The effects of the thickness and location of the plate were evaluated.

• Journal of the Korean Physical Society
• /
• 제73권11호
• /
• pp.1735-1743
• /
• 2018

Excitons are the most prominent features of the optical properties of monolayer transition-metal dichalcogenides(TMDC). In view of optoelectronics it is very important to understand the decay mechanisms of the excitons of these materials. Auger recombination of excitons are regarded as one of the dominant decay processes. In this paper the Auger constant of recombination is computed based on the approach proposed by Kavoulakis and Baym. We obtain both temperature dependent (from type A, A' processes) and temperature independent (from type B, B' processes) contributions, and a numerical estimate of theoretical result yields the value of constant in the order of $10^{-2}cm^2s^{-1}$, being consistent with existing experimental data. This implies that Auger decay processes severely limit the photoluminescence yield of TMDC-based optoelectronic devices.

• KSBB Journal
• /
• 제16권3호
• /
• pp.246-252
• /
• 2001

We isolated a bacterium that produces an extracellular maltopentaose(G5)-forming amylase from amylose and soluble starch. The bacterium was identified and assigned as a Bacillus sp. AIR-5. The amylase did not hydrolyze maltose, maltotriose, maltotetraose or maltopentaose. Optimum medium composition for maltopentaose production in flask culture was 2%(w/v) soluble starch, 0.4%(w/v) tryptone, 0.5%(w/v) NaCl, 0.5%(w/v) K$_2$HPO$_4$, and 3 mM CaCl$_2$at pH 8.0, 28$^{\circ}C$. The highest yield for maltopentaose production in this condition was 6.45 g/L and was 32.55% of theoretical yield.

• 한국생산제조학회지
• /
• 제7권6호
• /
• pp.1-11
• /
• 1998

This paper presents performance analyses of three types of the cylindrical-type ER(electro-rheo-logical) valves, which have different electrode length and width but same electrode area. Following the composition of silicone oil-based ER fluid, the field-dependent yield stresses are obtained from experimental investigation on the Bingham property of the ER fluid. The ER valve which is dependent on the applied electric field is devised and its theoretical model is derived. On the basis of the pressure-drop analysis, three types of the ER valves are designed and manufactured. After experimentally evaluation field-dependent pressure drops, PI controller is formulated to achieve tracking control on desired pressure drop. The controller is then experimentally implemented and tracking control performance is presented in order to demonstrate superior controllability of the ER valve. In addition, the response characteristic of the ER valve with respect to the excitation frequency of the electric fiedls is provided to show the feasibility of practical application.

• 생명과학회지
• /
• 제12권6호
• /
• pp.765-768
• /
• 2002

Rhodotorula sp. CL-82 유래 의 epoxide hydrolase 활성을 이용하여 라세믹 styrene oxide에 대한 입체선택적 가수분해 반응을 실시하였다. Rhodotorula sp. CL-82 생촉매의 입체선택적 가수분해속도를 나타내주는 반응표면 곡선에 대한 분석을 통해 pH, 반응주도, cosolvent 첨가량에 대한 최적조건을 각각 7.6,$33.3^{\circ}C$ , 3%(v/v)으로 결정하였다. 최적반응조건에서 약 4시간 정도의 반응을 통해 ee값이 99% 이상인 광학적으로 순수한 (S)-styrene oxide를 이론 수율대비 40% 수율로 얻을 수 있었다.

• 한국정밀공학회지
• /
• 제19권11호
• /
• pp.37-45
• /
• 2002

This paper presents the field-dependent Bingham characteristics and damping force control of an electro-rheological (ER) fluid under squeeze mode operation. The squeeze force of the ER fluid due to the imposed electric field is analyzed and an appropriate size of the disk-type electrode is devised. On the basis of the theoretical model of the ER fluid under squeeze mode operation, the yield stress and response speed of the ER fluid are distilled from the time responses of squeeze force to the step electric potentials. Measured squeeze forces under various excitation conditions are compared with the predicted ones from Bingham model and time constant obtained at the transient response test. In addition, the controllability of the field-dependent damping force of the ER fluid under squeeze mode is experimentally demonstrated by implementing simple PID controller.