• Title/Summary/Keyword: the w-operation

Search Result 2,473, Processing Time 0.043 seconds

Development of in-situ Sintered Ni-Al Alloy Anode for Molten Carbonate Fuel Cell (용융탄산염 연료전지용 in-situ 소결된 Ni-Al 합금 연료극 개발)

  • Chun, H.A.;Yoon, S.P.;Han, J.;Nam, S.W.;Lim, T.H.
    • Journal of the Korean Electrochemical Society
    • /
    • v.9 no.3
    • /
    • pp.124-131
    • /
    • 2006
  • For commercialization of molten carbonate fuel cell (MCFC), it has some problems to be overcome such as decrease of porosity and thickness of the anode under the operating condition (at $650^{\circ}C$ and working pressure of more than 2 $kg_f/cm^2$). Recently, Ni-Al alloy anode has been proposed to replace the conventional Ni-Cr anode as an alternative material to resist a creep and inhibit the sintering. The objective of this research is to sinter the green sheet of Ni-Al alloy anode during single cell pre-treatment process, which has several advantages like cost down and simplification of manufacturing process. However, the Ni-Al alloy anode prepared with a conventional pre-treatment process showed the phase separation of Ni-Al alloy and formation of micropore(${\leqq}0.4{\mu}m$), resulting in low creep resistance and high electrolyte re-distribution. In order to prevent the Ni-Al alloy anode from phase-separating, nitrogen gas was used in the process of pre-treatment. Introducing the nitrogen, the phase separation from Ni-Al alloy into nickel and alumina was minimized and increased creep resistance. However, there was some micropore formation on the surface of Ni-Al alloy anode during the cell operation due to creation of lithium aluminate. Addition of more amount of electrolyte into a cell, especially at cathode, made the cell performance stable for 2,000 hrs. Consequently, it was possible to make the Ni-Al alloy anode with good creep resistance by the modified in-situ sintering technique.

Establishment of Waste Collection and Transportation System for Composting I. Estimation of Unit Garbage Generation (퇴비화촉진을 위한 쓰레기 수거체계의 확립 I. 음식물찌꺼기 원단위 발생량의 산정)

  • Shin, H.S.;Hwang, E.J.;Kang, H.;Lee, S.J.;Jang, W.
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.3 no.2
    • /
    • pp.25-36
    • /
    • 1995
  • It is important to separate the compostables from waste for successful operation of composting plant, since various compositions are mixed in it. For the separation of compostables, it is necessary to estimate total amounts of compostables from several sources. Based on it, required capacity and number of composting plant as well as proper waste collection and transportation system can be determined. So, amounts of garbage, major target material for composting. were estimated in this study. In survey of unit garbage generation(UGG). different estimation results would be obtained depending on the basis of its measurement. However, previous researches did not consider it. In this paper, the correlations between area and the number of user of garbage source were analyzed to find the related equations which were apllyed to estimation of total generation. Obtained results are as the following. Relative variations of measured UGG based on area and custumer are 62.5 and 52.8, respectively. In linear regression, related equation between area and custumer was Y=0.244X+59.0 (X=area, Y=custumer). The correlation factor r is 0.904. Equation Y=616.5X/(X+1215.4) was also obtained from linear regression using Monod equation (r=0.720). From the first order equation and measured data of UGG based on custumer, amounts of garbage generation from restaurant in Seoul and the whole country were calculated to 2043.9 ton/d and 9014.0 ton/d, respectively. But, the values calculated from measured data of UGG based on area were as low as 821.3 ton/d Cin Seoul) and 3821.0 ton/d(in the whole country). Consequently, the measurement of unit garbage generation based on the number of custumer was more favorable to lessen the points of survey and to guarantee the representative values. Especially, it would fit well on restaurant having statistics of area.

  • PDF

Laparoscopy Application to Determine Estrous Cycle in Korean Black Goats (복강경을 이용한 한국흑염소의 성주기 판정)

  • Yang, H.S.;Jang, S.K.;Yong, H.W.;Cho, J.K.;Shin, S.T.
    • Journal of Embryo Transfer
    • /
    • v.22 no.1
    • /
    • pp.69-74
    • /
    • 2007
  • This study was performed to determine the estrous cycles by macroscopic observation of the ovarian changes using the laparoscopy and to make use of these results for embryo transfer in Korean black goat (Copra hircus aegagrus). Laparoscopic examinations of the ovaries were performed from 2 days after $CIDR^(R)$ removal to 22 days after ovulation. The serial morphological changes of follicles and corpus luteum (CL) were observed. CL was classified corpus hemorrhagicum(CH), corpus luteum (CL) and corpus albicans (CA) by its maturation and regression. On the day before ovulation (Day 0), Graafian follicles (GF) were found on one or both ovaries. On the day (Day 1) and $2^{nd}$day (Day 2) of ovulation, and ovulation depression (OD) and an early stage corpus hemorrhagicum $(CH_1)$ were observed at the site of GF, respectively. On Days 3 to 4, more developed and enlarged corpus hemorrhagicum $(CH_2\;and\;CH_3)$ arised from the ovulation of the GF with well vascularization. On Days 5 to 6, it was identified that mature corpus luteum $(CL_3)$ was grown on the ovary, and fully developed CL with adjacent follicles were occupied most part of the ovary on Days 17 and 18. Then the size of CL was diminished, and completely luteal regression $(CL_1\;or\;CA)$ with new large follicle was identified on Days 20 and 22. From these results, the 4 stages of the estrous cycle in Korean black goats were 1) estrus (Day 0) for 1 day, 2) metestrus $(Day\;1{\sim}4)$ for 4 days (stage of CH development), 3) diestrus $(Day\;5{\sim}16/17)$ for 12 or 13 days (luteal stage), and 4) proestrus $(Day\;17/18{\sim}20/22)$ for 4 or 5 days (stage of luteal regression and follicular growing). Laparoscopy for observation of ovarian changes was invasive than laparotomy. Additionally, it had advantages of reduced adhesion and quick operation time. It was considered that laparoscopic examination of ovarian changes will be useful for embryo transfer in the Korean black goats.

Development of the paper bagging machine for grapes (휴대용 포도자동결속기 개발연구)

  • Park, K.H.;Lee, Y.C.;Moon, B.W.
    • Journal of Practical Agriculture & Fisheries Research
    • /
    • v.11 no.1
    • /
    • pp.79-94
    • /
    • 2009
  • The research project was conducted to develop a paper bagging machine for grape. This technology was aimed to highly reduce a labor for paper bagging in grape and bakery. In agriculture labor and farm population has rapidly decreased since 1980 in Korea so there was so limit in labor. In particular there is highly population in women and old age at rural area and thus labor cost is so high. Therefore a labor saving technology in agricultural sector might be needed to be replaced these old age with mechanical and labor saving tool in agriculture. The following was summarized of the research results for development of a paper bagging machine for grape. 1. Development of a new paper bagging machine for grape - This machine was designed by CATIA VI2/AUTO CAD2000 programme. - A paper bagging machine was mechanically binded a paper bag of grape which should be light and small size. This machine would be designed for women and old age with convenience during bagging work at the field site. - This machine was manufactured with total weight of less than 350g. - An overage bagging operation was more than 99% at the actual field process. - A paper bagging machine was designed with cartridge type which would be easily operated between rows and grape branches under field condition. - The type of cartridge pin was designed as a C-ring type with the length of 500mm which was good for bagging both grape and bakery. - In particular this machine was developed to easily operated among vines of the grape trees. 2. Field trials of a paper bagging machine in grape - There was high in grape quality as compared to the untreated control at the application of paper bagging machine. - The efficiency of paper bagging machine was 102% which was alternative tool for the conventional. - The roll pin of paper bagging machine was good with 5.3cm in terms of bagging precision. - There was no in grape quality between the paper bagging machine and the conventional method. - Disease infection and grape break was not in difference both treatments.

Alterations in Thyroid Hormone Levels After Open Heart Surgery (개심술 후 갑상선 호르몬치 변화에 대한 연구)

  • 김광휴;조삼현
    • Journal of Chest Surgery
    • /
    • v.30 no.2
    • /
    • pp.131-136
    • /
    • 1997
  • The hemodynamic effects of thyroid hormones which is well established, affect myocardial contractility, heart rate, and myocardial oxygen consumption. The alterations in thyroid function test are frequently seen in patients with nonthyroidal illness and often correlate with the severity of the illness and the prosnosis. In this study, thyroid hormone changes were investigated in 20 patients who received cardiopulmonary bypass(CPB). All patients showed a state of biochemical euthyroidism preoperatively: The results were as follows : 1. Serum triiodothyronine(73) reached to its nadir(30.05 $\pm$ 17.5ng/dl, p(0.001) at 10 minutes after the start of CPB and remained low(p(0.05) throughout the study period. 2. Serum thyroxine(74) concentr tion slightly decreased after CPB, but maintained within normal range. 3. Serum free thyroxine(W4) concentration slightly increased after CPB, but maintained within normal range. 4. Serum thyroid stimulating hormone(TSH) concentration increased 10 minute after CPB, reached to its nadir(3.37 $\pm$ 0.81u1U/m1, p(0.001) at 2 hours after CPB. After then, serum TSH concentration decreased and reached its normal levels at 24 hours after CPB. 5. The patients whose postoperative recovery was uneventful(Group 1) had higher serum 73 levels than those who had postoperative complications(Group 2)(p<0.05). Group 1 showed elevating patterns of serum 73 in the fourth day after operation, whereas group 2 did not show such an elevating pattern. These findings are similar to the euthyroid sick syndrome seen in severely ill patients and indicate that patients undergoing open heart surgery have suppression of the pituitary-thyroid axis.

  • PDF

Surgical Treatment of Pulmonary Atresia with Intact Ventricular Septum -Effect of the size of tricuspid valve annulus on the surgical outcome- (영아기에 발견된 심실중격이 온전한 폐동맥 폐쇄증의 외과적 수술요법 술전 삼첨판륜 크기 가 수술 결과에 미치는 영향)

  • 이정렬;윤태진
    • Journal of Chest Surgery
    • /
    • v.29 no.10
    • /
    • pp.1081-1089
    • /
    • 1996
  • Pulmonary atresia with intact ventricular septum has continued to have a high surgical mortality and morbidity. This mAy attribute to the non-uniformity of the anomaly. We reviewed a total of 34 infants with pulmonary atresla and intact ventricular septum managed in this hospital between 1987 and 1995. Mean age and body weight were 57.2 (range, 3-208) days and 4.1 (range, B.3∼6.8) kg. The preoperative Z-value of the diameter of the tricuspid valve was less than -2 in 85.2% of patients and less than -4 in 33. 3% . It is well correlated w th right ventricular cavity size (n=27. r10.68, p< 0.05). Coronary artery-right ventricular fistulas were identified in 3 patients, and right ventricular dependency was suspected in 1 Over All hospital mortality was 23.5%(8/34), although it decreased to 16.6%(4124) in 1990s. Subsequent procedures were performed in 6 patients between 3 days and 58 months after Initial palliation : one bidirectional cavopulmonary shunt and 1 Fontan operation after systemic-pulmonary shunt, 3 transannular patch + atrial septal defect closure and 1 additional systemic-pulmonary shunt after polmonary valvectomy or valvotomy. Changes of Z-values of the diameter of tricuspid valve have been followed up in 11 patients between 1 and 66 months postoperatively. Z-values were increased In 5 out of 8 transannular right ventriculAr outflow tract enlargement group and in 1 out of 3 pulmonary valvectomy or valvotomy group. Our data suggest that tailoring a treatment to right ventricular cavity size and coronary anom lies may improve the surgical outcome. A Z-value of the tricuspid valve diameter could be used.

  • PDF

Impact of Pulmonary Vascular Compliance on the Duration of Pleural Effusion Duration after Extracardiac Fontan Procedure (수술 전 폐혈관 유순도가 심장 외 도판을 이용한 Fontan 수술 후 늑막 삼출 기간에 미치는 영향)

  • Yun Tae-Jin;Im Yu-Mi;Song Kwang-Jae;Jung Sung-Ho;Park Jeong-Jun;Seo Dong-Man;Lee Moo-Song
    • Journal of Chest Surgery
    • /
    • v.39 no.8 s.265
    • /
    • pp.579-587
    • /
    • 2006
  • Background: Preoperative risk analysis for Fontan candidates is still less than optimal in that patients with apparently low risks may have poor surgical outcome; prolonged pleural drainage, protein losing enteropathy, pulmonary thromboembolism and death. We hypothesized that low pulmonary vascular compliance (PVC) is a risk factor for prolonged pleural effusion drainage after the Fontan operation. Material and Method: A retrospective review of 96 consecutive patients who underwent the Extracardiac Fontan procedures (median age: 3.9 years) was performed. Fontan risk score (FRS) was calculated from 12 categorized preoperative anatomic and physiologic variables. PVC $(mm^2/m^2{\cdot}mmHg)$ was defined as pulmonary artery index $(mm^2/m^2)$ divided by total pulmonary resistance $(W.U{\cdot}/m^2)$ and pulmonary blood flow $(L/min/m^2)$ based on the electrical circuit analogue of the pulmonary circulation. Chest tube indwelling time was log-transformed (log indwelling time, LIT) to fit normal distribution, and the relationship between preoperative predictors and LIT was analyzed by multiple linear regression. Result: Preoperative PVC, chest tube indwelling time and LIT ranged from 6 to 94.8 $mm^2/mmHg/m^2$ (median: 24.8), 3 to 268 days (median: 20 days), and 1.1 to 5.6 (mean: 2.9, standard deviation: 0.8), respectively. FRS, PVC, cardiopulmonary bypass time (CPB) and central venous pressure at postoperative 12 hours were correlated with LIT by univariable analyses. By multiple linear regression, PVC (p=0.0018) and CPB (p=0.0024) independently predicted LIT, explaining 21.7% of the variation. The regression equation was LIT=2.74-0.0158 PVC+0.00658 CPB. Conclusion: Low pulmonary vascular compliance is an important risk factor for prolonged pleural effusion drainage after the extracardiac Fontan procedure.

Changes of Hemodynamic and Central Pulmonary Artery Dimension After Bidirectional Cavopulmonarv Shunt (양방향성 체정맥-폐동맥 단락술후 혈역학 및 중심 폐동맥 크기의 변화)

  • 이정렬;이해원
    • Journal of Chest Surgery
    • /
    • v.29 no.12
    • /
    • pp.1306-1315
    • /
    • 1996
  • This study reviewed the changes of hemodynamlcs and centrAl pulmonary artery dimension in 54 patients who underwent bidirectional cavopulmonary shunt(BCPS) between February 1992 and December 1995 at Seoul National University Childrell's Hospital. Ag and body weight of patients averaged 36.8 $\pm$ 37.7 months and 8.0$\pm$3.0 kg, respectively Eightynine percent of patients had more than 2 violations of the risk factors for Fontan operation, resulting overall hospital mortality of 16.6%(9154). Serial hemodynamic and anglographic examinations before and mean 16.3 $\pm$ 14.3 months iirter BCPS were compared. The arterial oxygen saturation improved from a preoperative value of 71 9: 10.1 % to 79.H $\pm$ 8. 5% (n:4), p<0.05). The values of arterial oxygen saturation were lower as the age of the patients with BCPS in place was older(n=22, R'=0.341, p=0.004). A mean pulmonary artery pressure and pulmonary vascular resistance reduced from 31 $\pm$17 to 1).5$\pm$3.SmmHg(n=22, p<0.05) and from ).2$\pm$2.1 to 2.3$\pm$2.7 unit (n=7. p>0.05), respectively. Follow-up study showed a significant Increase of absolute values of ipsilateral pulmoanry artery (n: 14, p<0.05), but no change of contralateral pulmonary artreries (n: 14. p=not significant(HSI). However, there w re significant decreases in diameters of both ipsilateral and contralateral pulmonary arteries standardized by patients' body surface areas(16.8% decrease, n: 14, p< 0. 05 for ipsilatreal, 25.1%, n=14, p<0.05 for contralateral). Pulmonary artery indices for cross sectional areas of both pulmonary arterises decreased 9.3 $\pm$ 13.8% with showing a trend of more decrease as the follow-up duration was longer, We conclude that the bidirectional cavopulmonary shunt provide an excellent.

  • PDF

The Survey of Particle Size of Total Mixed Ration in Korea (국내 TMR의 입자도에 관한 조사 연구)

  • Ki, K.S.;Kim, H.S.;Jeong, H.Y.;Lee, H.J.;Ahn, B.S.;Kim, J.S.;Kwang, S.W.;Kim, Y.K.;Ha, J.K.
    • Journal of Animal Science and Technology
    • /
    • v.45 no.5
    • /
    • pp.813-818
    • /
    • 2003
  • This study was carried out to survey operation system of self-making TMR and particle size of self-making and commercial TMR, then to compare TMR particle size recommended by Penn State Particle Size Separator. Daily mixing time in self-making TMR averaged 48.6${\pm}$28.0min., 2 augar type of mixer was most by 55.5% and daily 2 times of mixing in summer and other season was 44.4 and 22.2%, respectively. Percentage of residual feed in upper sieve(19mm diameter), middle sieve(8 to 18mm diameter) and lower pen was 21.5~25.6%, 16.0~25.8%, 52.8~61.4%, respectively, at self-making TMR mixer. Percentage of particle sizes of more than 19mm in self-making and commercial TMR was 24.9${\pm}$1.4 and 26.2${\pm}$1.7%, that of 8-10mm 22.8${\pm}$1.0 and 12.8${\pm}$1.2 and that of less than 8mm 52.3${\pm}$1.7 and 61.0${\pm}$1.5, respectively, which in particle length of 8~13mm in self-making and commercial TMR was lower by 82.6 and 100% compared to that recommended by Penn State particle separator, respectively. Especially there was not particle length of more than 19mm in commercial TMR at all. It is necessary to check the number of cows ruminating in a farm in order to estimate the particle size of TMR; it is recommended to change the TMR mixing time or the TMR formulae if the proportion of ruminating cows in a farm is less than 40 %.

Cohort Observation of Blood Lead Concentration of Storage Battery Workers (축전지공장 근로자들의 혈중 연농도에 대한 코호트 관찰)

  • Kim, Chang-Yoon;Kim, Jung-Man;Han, Gu-Wung;Park, Jung-Han
    • Journal of Preventive Medicine and Public Health
    • /
    • v.23 no.3 s.31
    • /
    • pp.324-337
    • /
    • 1990
  • To assess the effectiveness of the interventions in working environment and personal hygiene for the occupational exposure to the lead, 156 workers (116 exposed subjects and 40 controls) of a newly established battery factory were examined for their blood lead concentration (Pb-B) in every 3 months up to 18 months. Air lead concentration (Pb-A) of the workplaces was also checked for 3 times in 6 months interval from August 1987. Environmental intervention included the local exhaust ventilation and vacuum cleaning of the floor. Intervention of the personal hygiene included the daily change of clothes, compulsory shower after work and hand washing before meal, prohibition of cigarette smoking and food consumption at the work site and wearing mask. Mean Pb-B of the controls was $21.97{\pm}3.36{\mu}g/dl$ at the preemployment examination and slightly increased to $22.75{\pm}3.38{\mu}g/dl$ after 6 months. Mean Pb-B of the workers who were employed before the factory was in operation (Group A) was $20.49{\pm}3.84{\mu}g/dl$ on employment and it was increased to $23.90{\pm}5.30{\mu}g/dl$ after 3 months (p<0.01). Pb-B was increased to $28.84{\pm}5.76{\mu}g/dl$ 6 months after the employment which was 1 month after the initiation of intervention program. It did not increase thereafter and ranged between $26.83{\mu}g/dl\;and\;28.28{\mu}g/dl$ in the subsequent 4 tests. Mean Pb-B of the workers who were employed after the factory had been in operation but before the intervention program was initiated (Group B) was $16.58{\pm}4/53{\mu}g/dl$ before the exposure and it was increased to $28.82{\pm}5.66{\mu}g/dl$(P<0.01) in 3 months later (1 month after the intervention). The values of subsequent 4 tests remained between 26.46 and $28.54{\mu}g/dl$. Mean Pb-B of the workers who were employed after intervention program had been started (Group C) was $19.45{\pm}3.44{\mu}g/dl$ at the preemployment examination and gradually increased to $22.70{\pm}4.55{\mu}g/dl$ after 3 months(P<0.01), $23.68{\pm}4.18{\mu}g/dl$ after 6 months, and $24.42{\pm}3.60{\mu}g/dl$ after 9 months. Work stations were classified into 4 parts according to Pb-A. The Pb-A of part I, the highest areas, were $0.365mg/m^3$, and after the intervention the levels were decreased to $0.216mg/m^3\;and\;0.208mg/m^3$ in follow-up tests. The Pb-A of part II was decreased from $0.232mg/m^3\;to\;0.148mg/m^3,\;and\;0.120mg/m^3$ after the intervention. Pb-A of part III and W was tested only after intervention and the Pb-A of part III were $0.124mg/m^3$ in Jannuary 1988 and $0.081mg/m^3$ in August 1988. The Pb-A of part IV not stationed at one place but moving around, was $0.110mg/m^3$ in August 1988. There was no consistent relationship between Pb-B and Pb-A. Pb-B of the group A and B workers in the part of the highest Pb-A were lower than those of the workers in the parts of lower Pb-A. Pb-B of the workers in the part of the lowest Pb-A incerased more rapidly. Pb-B of group C workers was the highest in part I and the lowest in part IV. These findings suggest that Pb-B is more valid method than Pb-A for monitoring the health of lead workers and intervention in personal hygiene is more effective than environmental intervention.

  • PDF