• The Research Journal of the Costume Culture
• /
• v.6 no.2
• /
• pp.66-76
• /
• 1998

In order to investigate the effect of shoulder pad affecting the arm movement, eleven women volunteers of standard body whose age is from eighteen to twenty-four(x±1σ) were chosen and this experiment had done according to front-vertical motion, side-vertical motion and horizontal motion of upper limps for tow different materials of shoulder pad(sponge, non-woven) and four different thickness of shoulder pad(0.6cm, 0.8cm, 1.2cm). On the base of this, this study, when putting on shoulder pad, try to find the reform method of shoulder part pattern. The results are as follows. 1. When puting on shoulder pad to blouse pattern to rise shoulder pad for rate of two-third per thickness is seemingly the best for sensory evaluation. So, when putting on shoulder pad, we understand that in order to improve sensory evaluation. So, when putting on shoulder pad, we understand that in order to improve sensory evaluation of clothes, when that, rising shoulder pad for ate of two-third per thickness is the best. 2. From the results of measure of functional volume and physiological value for functionality evaluation according to thickness and material, motion of shoulder pad, 1.2 cm thickness and non-woven material is evaluated the worst for functionality. 3. From the results of sensory evaluation and functionality evaluation of material of shoulder pad, sponge material is superior for functionality but not for sensory evaluation, non-woven material is superior for sensory evaluation non-woven material is superior for sensory evaluation but not for functionality. So, think that it had better use sponge material for functional clothes, non-woven material for aesthetical clothes. 4. From the results of functionality of clothes, when putting on shoulder pad, the worst discomfortable parts are the armpit part and the shawl part, functionality of these part shoulder be reformed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.03a
• /
• pp.447-454
• /
• 1999

The compressive capacity and the soil plugging resistance of single open-ended pipe pile were completely decreased in the previous study on the behavior of shorter single pile during simulated seaquake induced by the vertical component of earthquake. But the capacity of single open-ended pipe pile with greater penetration and the capacity of piles group with shorter penetration were expected to be stable after seaquake motion. In this study, first, 2-piles or 4-piles are driven into the calibration chamber included in saturated fine medium sand with several simulated penetrations, and the compressive load test for each piles group was performed. Then, about 95 % compressive load of the ultimate capacity was applied on the pile head during the simulated seaquake motion. Finally, In confirm the reduction of pile capacity during the simulated seaquake motion, the compressive load test for each single pile or piles group after seaquake motion was performed. During the simulated seaquake, the compressive capacity of open-ended pipe piles with greater penetration ( 〉about 27 m) was not degraded even in deep sea deeper than 220 m and soil plug within open-ended pipe pile installed in deep sea was stable after seaquake motion. Also, in the case of 2-piles or 4-pile groups, the compressive capacity after seaquake motion was not degraded at all regardless of pile penetration depth beneath seabed, sea water depth and seaquake frequency.

• Earthquakes and Structures
• /
• v.27 no.1
• /
• pp.41-55
• /
• 2024

There are obvious differences between the characteristics of offshore ground motion and onshore ground motion in current studies, and factors such as water layer and site conditions have great influence on the characteristics of offshore ground motion. In addition, unlike seismic response analysis of offshore superstructures such as sea-crossing bridges, tunnels are affected by offshore soil constraints, so it is necessary to consider the dynamic interaction between structure and offshore soil layer. Therefore, a seismic response analysis model considering the seawater, soil layer and tunnel structure coupling is established. Firstly, the measured offshore and different soil layers onshore ground records are input respectively, and the difference of seismic response under different types of ground motions is analyzed. Then, the models of different site conditions were input into the measured onshore bedrock strong ground motion records to study the influence of seawater layer and silt soft soil layer on the seabed and tunnel structure. The results show that the overall seismic response between the seabed and the tunnel structure is more significant when the offshore ground motion is input. The seawater layer can suppression the vertical seismic response of seabed and tunnel structure, while the slit soft soil layer can amplify the horizontal seismic response. The results will help to promote seismic wave selection of marine structures and provide reference for improving the accuracy of seismic design of immersed tunnels.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.353-361
• /
• 2015

Objective : The aim of this study was to develop the non-powered horse riding device and was to evaluate the elaborate its applicability throughout static structural and transient structural analysis of the outdoor core strength exercise equipment. Method : Fifteen college students (mass: $69.55{\pm}13.38kg$, height: $1.69{\pm}5.61m$, age: $21.42{\pm}1.83yrs$) rode the powered horse riding device and 14 college students (mass: $71.12{\pm}9.74kg$, height: $1.73{\pm}3.31m$, age: $22.50{\pm}1.47yrs$) rode the non-powered horse riding device for the comparison. All motion capture data was collected at 100 Hz using six infrared cameras and the muscular activities were collected using a Delsys Trigno wireless system. The peak forward/backward lean angle, range of motion anter/posterior and vertical COM(Center of mass) movement of trunk and pelvis segment, and muscle activities of six muscles were compared between the two devices by using independent t-test (p<.05). Results : Several kinematic variables (peak forward-backward lean angle and vertical COM movement of trunk and pelvis segment, range of motion of trunk) significantly different between non-powered and powered horse riding device. The muscle activities of Rectus abdominis and External oblique of abdomen on the non-powered horse riding device were significantly greater than those of the powered device. Conclusion : It was concluded that non-power horse riding device could give the effect of core strength exercise as well as the body motion which can simulate the powered horse riding device.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.300-306
• /
• 2012

In this paper, we propose a vision based hand motion recognition method for an untouchable user interface of smart devices. First, an original color image is converted into a gray scaled image and its spacial resolution is reduced, taking the small memory and low computational power of smart devices into consideration. For robust recognition of hand motions through separation of horizontal and vertical motions, the horizontal principal area (HPA) and the vertical principal area (VPA) are defined respectively. From the difference images of the consecutively obtained images, the center of gravity (CoG) of the significantly changed pixels caused by hand motions is obtained, and the direction of hand motion is detected by defining the least mean squared line for the CoG in time. For verifying the feasibility of the proposed method, the experiments are carried out with a vision system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.8
• /
• pp.704-709
• /
• 2016

Wave energy generation systems can be divided into oscillating water chamber type, over topping device type and wave activating body type. The wave activating body type converts wave energy to kinetic energy, and the power generation amount increases as the motion of an activating body increases. In this paper, the wave energy convertor consists of a main body, which has an H-shape, and the activating body. These are connected by a bar-type bridge. By the incident wave, when the activating body moves with vertical motion this motion is consequently converted into rotational motion. The twisting moment and angular velocity at a shaft of convertor are calculated according to various conditions of the incident wave and the shape of the activating body. This can be used as a basic idea for determining the design of wave activating body type convertor.

• The Journal of Korea Robotics Society
• /
• v.18 no.2
• /
• pp.143-154
• /
• 2023

In this study, a fast motion planning method for the swing motion of a 6x6 wheel-legged robot to traverse large obstacles and gaps is proposed. The motion planning method presented in the previous paper, which was based on trajectory optimization, took up to tens of seconds and was limited to two-dimensional, structured vertical obstacles and trenches. A deep neural network based on one-dimensional Convolutional Neural Network (CNN) is introduced to generate keyframes, which are then used to represent smooth reference commands for the six leg angles along the robot's path. The network is initially trained using the behavioral cloning method with a dataset gathered from previous simulation results of the trajectory optimization. Its performance is then improved through reinforcement learning, using a one-step REINFORCE algorithm. The trained model has increased the speed of motion planning by up to 820 times and improved the success rates of obstacle crossing under harsh conditions, such as low friction and high roughness.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.1
• /
• pp.13-19
• /
• 2017

Relatively low efficiency in anaerobic digestion process is mainly caused by unproper mixing method. In this study, tray motion type agitator was applied in actual anaerobic digestion tank in order to improve the digestion efficiency, equalize the flow velocity distribution and energy saving. The impeller of tray motion type agitator was reciprocated vertically. Gas lift type agitator and tray motion type agitator appears almost same mixing efficiency include digestion rates. However, tray motion type agitator have shown that lower energy consumption compared to the conventional gas lift type agitator. Implementation of tray motion type agitator in the anaerobic digestion tanks contributed to the stabilization of mixing environment, efficiency and energy efficiency of the tank.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.2
• /
• pp.177-189
• /
• 2010

In order to incorporate correctly the large or local scale circulation in an atmospheric model, a nudging term is introduced into the equation of motion. The MM5 model was used to assess the meteorological values differences in each case, during ozone episode days in Gwangyang bay. The main objective of this study is to investigate the effect of horizontal and vertical flow fields according to the surface and vertical observation data assimilation by upper wind conditions. Therefore, we carried out several numerical experiments with various parameterization methods for nudging coefficient considering the upper wind conditions (synoptic or asynoptic condition). Nudging considering the synoptic and asynoptic nudging coefficient does have a clear advantage over dynamic initialization, therefore appropriate limitation of these nudging coefficient values on its upper wind conditions is necessary before making an assessment. Obviously, under the weak synoptic wind, there was apparent advantage associated with nudging coefficient by the regional difference. The accuracy for the prediction of the meteorological values has been improved by applying the appropriate PBL (Planetary Boundary Layer) limitation of circulation.

• Korean Journal of Applied Biomechanics
• /
• v.34 no.1
• /
• pp.18-24
• /
• 2024

Objective: The purpose of this study was to evaluate the effects of an 8-week velocity-based training on the maximum vertical jump in elite sprinters. Method: Ten elite sprinters were participated in this study (age: 21 ± 0.97 yrs., height: 179 ± 3.54 cm, body mass: 72 ± 2.98 kg). An 8-week velocity-based power training was provided to all subjects for twice per week. Their maximum vertical jumps were measured before and after velocity-based training. A 3-dimensional motion analysis with 8 infrared cameras and 4 channels of EMG was performed in this study. A paired t-test was used for statistical verification. The significant level was set at α=.05. Results: There were no statistically significant differences were found between pre and post the training (p>.05). However, most variables included jump record, knee joint ROM, and muscle activation of rectus femoris showed increased pattern after the training. Conclusion: In this study, an 8-week velocity-based training did not showed the significant training effects. However, knee joint movement which is the key role of the vertical jump revealed positive kinematic and kinetic pattern after the training. From this founding, it is believed that velocity-based training seems positively affect the vertical jump which is the clear measurement of mechanical power of sprinter. In addition, to get more clear evidence of the training more training period would be needed.