• 대한조선학회논문집
• /
• 제46권4호
• /
• pp.373-381
• /
• 2009

The running attitude of a high-speed planing craft may change significantly depending on its speed in seaway. Other variables that may influence its running attitude are its weight, center of gravity, sea conditions, and so on. In this paper, planing craft model tests were carried out with respect to above variables in SNU towing tank, and vertical motion responses of a planing craft in regular head waves were analyzed. The experimental results in regular waves were compared with those in calm water, and compared with the theoretical estimations. Finally, the effects of running speeds of a planing craft on its motion amplitudes are confirmed.

• 한국운동역학회지
• /
• 제21권5호
• /
• pp.645-652
• /
• 2011

The purpose of this study was to analyze, in real time, the glide motion and release motion of domestic athletes and gold and bronze medalists employing the glide technique for the men's shot put at the Daegu World Athletic Championship in 2011. In the glide motion, the Korean athletes had a relatively high body center and shot put heights and lager stretching angles for their hips and knees. In the delivery phase, which shifts to the release phase, the Korean athletes showed slower vertical body center and shot put speeds, and they changed the phase, to the release phase by using a small body angle. In the release phase, the Korean athletes showed differences in their projection speeds and vertical body center speeds. The world-famous players showed high angle speeds, which refer to the composition of the rotation force at the moment of release (body, hip, and shoulder line). In the release phase, the Korean athletes did not have fully stretched hip and knee angles, which might have negatively influenced the vertical speed. Because the Korean athletes showed relatively low projection heights and projection angles. it was found that they need to enhance the muscular power of their, throwing arms and lower limbs.

• 수산해양기술연구
• /
• 제51권4호
• /
• pp.504-511
• /
• 2015

In this paper, the results of evaluating the passenger comfort due to the standard deviation of acceleration in vertical and lateral direction regarding the ship response in irregular wave by ordinary strip method in regular wave and energy spectrum using linear superposition theory in order to evaluate the motion of experimental ship are as follows. According to the results of ship response, it was possible to find that, in order to reduce the motion of ship, a ship operating in bow sea was more stable than in quartering sea. In the results of analyzing the standard deviation of acceleration in vertical direction according to each component wave pattern, when there was a wave length of 56m and an average wave period of 6 sec, most of cases showed the peak value. And among them, the standard deviation was 0.35 which was the highest in head sea. And in case of lateral direction, the maximum value was shown in a wave length of 100m and an average wave period of 8 sec. And it was 0.16 in beam sea and ${\chi}=150^{\circ}$. In the evaluation of passenger comfort due to standard acceleration in vertical and lateral direction, it was 80% in head and bow sea. On the other hand, it was shown to be 15% in follow sea. Accordingly, when the expected wave height in a sea area where a training ship was intended to operate was known, it was possible to predict the routing of ship. And altering her course could reduce the passenger comfort by approximately 50%.

• 한국운동역학회지
• /
• 제26권4호
• /
• pp.433-441
• /
• 2016

Objective: The purpose of this study was to understand the injury mechanism and to provide quantitative data to use in prevention or posture correction training by conducting kinematic and kinetic analyses of risk factors of lower extremity joint injury depending on the change of direction at different angles after a landing motion. Method: This study included 11 men in their twenties (age: $24.6{\pm}1.7years$, height: $176.6{\pm}4.4cm$, weight: $71.3{\pm}8.0kg$) who were right-leg dominant. By using seven infrared cameras (Oqus 300, Qualisys, Sweden), one force platform (AMTI, USA), and an accelerometer (Noraxon, USA), single-leg drop landing was performed at a height of 30 cm. The joint range of motion (ROM) of the lower extremity, peak joint moment, peak joint power, peak vertical ground reaction force (GRF), and peak vertical acceleration were measured. For statistical analysis, one-way repeated-measures analysis of variance was conducted at a significance level of ${\alpha}$ <.05. Results: Ankle and knee joint ROM in the sagittal plane significantly differed, respectively (F = 3.145, p = .024; F = 14.183, p = .000), depending on the change of direction. However, no significant differences were observed in the ROM of ankle and knee joint in the transverse plane. Significant differences in peak joint moment were also observed but no statistically significant differences were found in negative joint power between the conditions. Peak vertical GRF was high in landing (LAD) and after landing, left $45^{\circ}$ cutting (LLC), with a significant difference (F = 9.363, p = .000). The peak vertical acceleration was relatively high in LAD and LLC compared with other conditions, but the difference was not significant. Conclusion: We conclude that moving in the left direction may expose athletes to greater injury risk in terms of joint kinetics than moving in the right direction. However, further investigation of joint injury mechanisms in sports would be required to confirm these findings.

• 센서학회지
• /
• 제25권3호
• /
• pp.202-207
• /
• 2016

Estimation of vertical position is critical in applications of sports science and fall detection and also controls of unmanned aerial vehicles and motor boats. Due to low accuracy of GPS(global positioning system) in the vertical direction, the integration of IMU(inertial measurement unit) with the GPS is not suitable for the vertical position estimation. This paper investigates an IMU-barometer integration for estimation of vertical position (as well as vertical velocity). In particular, a new two-step Kalman/complementary filter is proposed for accurate and efficient estimation using 6-axis IMU and barometer signals. The two-step filter is composed of (i) a Kalman filter that estimates vertical acceleration via tilt orientation of the sensor using the IMU signals and (ii) a complementary filter that estimates vertical position using the barometer signal and the vertical acceleration from the first step. The estimation performance was evaluated against a reference optical motion capture system. In the experimental results, the averaged estimation error of the proposed method was 19.7 cm while that of the raw barometer signal was 43.4 cm.

• 한국유체기계학회 논문집
• /
• 제17권2호
• /
• pp.41-47
• /
• 2014

Experimental results are given for the vertical motion of water in the water chambers for wave energy converter aligned along the wave propagation direction in order to avoid the impulsive wave forces. This paper mainly focuses on the property of the amplitude of the vertical motion of the water surface in the chambers. The amplification has been investigated by dimensionless parameters of wave period to resonance period ratio of the U-shaped oscillation, $T/T_r$, chamber size to wave length ratio, l/L, water depth to wave length ratio, h/L, amplitude of up-down motion of water particles to draft of the front wall ratio, ${\zeta}/D$. It has been shown that l/L should be less than 0.1 and as $T/T_r$ approaches unity the up-down of the water in the chambers is amplified. Also, the structure of the walls which form th water chambers has been examined roughly. It is deduced that the chambers set on both sides of the hull of a single-point moored floating vessel is preferable to those set along a fixed structure such as breakwaters.

• 한국해안해양공학회지
• /
• 제14권3호
• /
• pp.183-191
• /
• 2002

해수교환이 우수하고, 조차에 따라 상·하로 자유롭게 운동하며, 연약지반과 대수심역에도 설치될 수 있다는 것을 일반적인 부방파제의 주요한 특징으로 들 수 있다. 본 연구는 말뚝계류된 부방파제에 의한 3차원파랑제어와 동적인 거동을 경계적분법과 고유함수전개법을 병용하는 수치해석법으로부터 논의한다. 여기서, 말뚝계류시스템은 연직운동만이 허용되고 다른 운동성분들은 모두 구속되며, 체인계류시스템보다도 파랑에너지의 흡수가 많은 것으로 알려져 있다. 본 연구에서는 말뚝계류에 있어서 말뚝과 본체인 폰툰과의 사이에 작용하는 마찰력과 같은 저항력은 고려되지 않는다. 수치해석결과에 따르면 부방파제의 홀수와 폭의 변화는 파랑제어에 큰 영향을 미치고, 입사파의 주기가 길면 부방파제를 통한 전달파가 크다는 것을 알 수 있다. 그리고, 부방파제의 연직운동은 단주기파에서 크게 나타난다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.336-340
• /
• 1997

This paper is a study about motor technic of motion and feedforward control in order to shape cutting control on the machine tool. The shape error caused by delay of the servo system in the direction of radius at the time of circular cutting is reduced by feedforward control, shape error generated by the position command delay is minimized by using the acceleration/deceleration time constant after the interpolation. The study was verified to optimization of motion control on experiments of a vertical machining center of the machine tool.

• 한국컴퓨터그래픽스학회논문지
• /
• 제1권2호
• /
• pp.201-212
• /
• 1995

This paper presents a new method of dynamics-based synthesis of bipedal, especially human, walking. The motion of the body at a time point is determined by ground reaction force and torque under the support foot and joint torques of the body at that time point. Motion synthesis involves specifying conditions that constrain ground reaction force and torque, and joint torques so that a given desired motion may be achieved. There are conditions on a desired motion which end-users can think of easily, e.g. the goal position and orientation of the swing foot for a single step and the time period of a single step. In this paper, we specify constraints on the motion of the support foot, which end-users would find difficult to specify. They are constraints which enforce non-sliding, non-falling, and non-spinning the support foot. They are specified in terms of joint torques and ground reaction force and torque. To satisfy them, both joint torques and ground reaction force and torque should be determined appropriately. The constraints on the support foot themselves do not give any good clues as to how to determine ground reaction force and torque. For that purpose, we specify desired trajectories of the application point of vertical ground reaction force (ground pressure) and the application point of horizontal ground reaction (friction) force. The application points of vertical pressure and friction force are good control variables, because they are indicators to kinds of walking motions to synthesize. The synthesis of a bipedal walking motion, then, consists of finding a trajectory of joint torques to achieve a given desired motion, so that the constraints are satisfied under the condition of the prescribed center of pressure and center of friction. Our approach is distinguished from many other approaches, e.g. the inverted-pendulum approach, in that it captures and formulates dynamics of the support foot and reasonable constraints on it.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 추계학술대회
• /
• pp.117-118
• /
• 2013

최근 들어 전 세계적으로 항공모함과 첨단 구축함 등 대규모의 최신 함정위주의 해상전력을 강화하는 상황에서 잠수함의 중요성이 더욱 부각되고 있다. 이에 따른 잠수함의 운동조종을 위한 정밀한 동유체력 미계수 값이 운동방정식에서 요구된다. 수직면 평면운동시험(VPMM)장비를 이용한 동유체력을 측정하였다. 심도를 변화하면서 잠수함 모형에 상하요, 종요 운동을 각각 주었고, 이를 로드셀을 이용하여 힘과 모멘트를 각각 획득 하였다. 그 결과, 푸리에 해석을 통한 수중잠수함 모형의 동유체력 계수를 얻었다.