• Journal of Forest and Environmental Science
• /
• 제22권1호
• /
• pp.41-49
• /
• 2006

일본에서 2004년도에 발행된 산림토목 목제구조물 시공 매뉴얼에 실려 있는 산림토목 목제구조물 설계지침은 총설, 목재의 이용과 특성, 조사, 계획 및 설계 등으로 구성되어 있으며, 이 논문에서는 총설, 목재의 이용과 특성, 조사 및 계획에 대하여 분석하였다. 분석 결과, 목재의 특성은 목재의 물리 화학적 특성, 환경에의 영향, 심리 생리적인 효과 및 목재의 부후성에 대해 정리되어 있으며, 조사항목은 유수에 의한 영향의 정도, 일사의 정도, 흰개미의 생식 유무, 지표수 및 지하수의 유하 상황, 계류 등에 서식하는 동식물의 상황, 물이용 상황 등이 제시되었다. 또한 계획에서는 목제구조물의 구조와 설치장소, 취급방법, 해당 지역의 목재 간벌재의 이용, 방부처리 등에 대하여 설명되어 있다.

• 한국가구학회지
• /
• 제25권1호
• /
• pp.36-44
• /
• 2014

This study was investigated to sensible characteristic and physical characteristic to estimate value of the craft for Pinus densiflora and Pinus densiflora for. erecta Uyeki wood. The sensual characteristics of wood are evaluated by wood figure, wood grain, odor, and the physical characteristics by weathering, abrasion, surface roughness and hardness. The wood figure of these species were observed at flat grain in the radial section and edge grain in the tangential section. Also, burl's figure was observed in Burl of Pinus densiflora wood. Pinus densiflora for. erecta Uyeki wood had volatile aroma compounds such as Camphene, Thymyl ether, ${\alpha}$-Longipinene, etc. Pinus densiflora wood had volatile aroma compounds such as ${\alpha}$-Longipinene, (+)-Cedrol, etc. The moisture soption, abrasion, hardness and roughness were very different between the two species.

• 한국가구학회지
• /
• 제23권1호
• /
• pp.26-37
• /
• 2012

This is the study about the New Formation Developement, the Changeable Table Design with Units that made of Wasted Wood to use restricted material rationally and to improve the space efficiency in the Table Design. We made some changeable table design with units that made of laminated wood wasted. And we found out the following formative characteristic and physical merits through this study. First, the space efficiency can be improve technically through the unit combination and organic transfomation of the specific form and a new method by laminated wood make the personal originality and the structral stability be built up. Second, there are some merits, moveable convenience and variable layout by the combination or transformation or personal fondness so that economical efficiency and variable of design can be improved. Third, we can remove original faults inside wood like a knot or not-uniform of wood organ when we laminate wood so that we use proper units that have original beauty of wood and can represent mild mood of furniture wholly. Fourth, much more strengthen tensile strength by the reciprocal action among the units that be made of laminated wood reduces wood's metamorphosis like bending or twisting so that the uniformity of wood can be gain and furniture's metamorphosis can be reduced. According to changes of nature environment, the difficulty of supply and demand for wood may be happen. According to changes of life style these days, supply and demand for environment friendly material, processing technique and developement of design to improve the efficiency of using space must be very important factor in morden furniture design. So we propose changeable furniture design by using new environment friendly meterial and processing method from this study.

• Journal of the Korean Wood Science and Technology
• /
• 제47권5호
• /
• pp.567-578
• /
• 2019

A common problem with fast-growing hardwoods is dimensional instability that limits use of their wood. In this study, we investigated the effects of pre-drying methods, temperatures, and heating duration on the specific gravity, water absorption, and dimensional stability of three tropical fast-growing hardwoods, jabon (Neolamarckia cadamba Roxb.), sengon (Falcataria moluccana Miq.), and mangium (Acacia mangium Willd.). Wood samples were pre-dried by two methods (fan and oven at $40^{\circ}C$), and heat treatments were performed at three temperatures (120, 150, and $180^{\circ}C$) for two different time periods (2 and 6 hours). The specific gravity, water absorption, dimensional stability, and structural changes of the samples were evaluated. The results revealed that heat treatments slightly reduced the specific gravity of all three wood species. In addition, the heat treatments reduced water absorption and significantly improved dimensional stability of the samples. Oven pre-drying followed by heat treatment at $180^{\circ}C$ for 6 hours resulted in good physical improvement of jabon and sengon wood. Fan pre-drying followed by heat treatment at $180^{\circ}C$ for 2 hours improved the physical properties of mangium wood. The heat treatment shows a promising technique for improving the physical characteristic of fast growing hardwoods.

• Journal of Forest and Environmental Science
• /
• 제22권1호
• /
• pp.50-57
• /
• 2006

일본에서 2004년도에 발행된 산림토목 목제구조물 시공 매뉴얼에 실려 있는 산림토목 목제구조물 설계지침은 총설, 목재의 이용과 특성, 조사, 계획 및 설계 등으로 구성되어 있으며, 이 논문에서는 설계 및 시공에 대하여 분석하였다. 분석 결과, 설계편에는 목재의 사용 환경과 열화, 구조, 수종의 선정, 치수 표시 등의 통일, 안정성과 강도의 검토, 목재의 강도, 목재의 치수의 허용 폭 등에 대하여 제시되어 있다. 또한 시공편에는 목재의 품질 확보, 방부처리 등의 품질 확인, 목제구조물의 기능 확보 방법, 목재열화의 정기적인 조사방법과 정성적인 판정기준 및 정량적인 조사방법 등에 대하여 설명되어 있다.

• 한국가구학회지
• /
• 제20권4호
• /
• pp.317-325
• /
• 2009

On the ground of that toy as for infants is an important tool for education as well as play and furthermore it has a great influences on their growth and development, the present study intends to analyze the characteristics of the infant-oriented toys made of wood, the environment-friendly material. Object of the study includes the infants aged 2 to 7, and the wooden toy not only in domestic also international cases are investigated and analyzed from the point of function and design in particular, and the infant-oriented wooden toy is finally characterized. The wooden toys are classified in 5 items according to functions. There are toy helping a physical development like small muscles, toy improving the creativity, toy assisting language learning like Korean & English, toy contributing to number understanding and counting, and toy for imitation of social roles. The characteristics of the wooden toy are that the natural color & grain of wood are shown first, and also the natural texture & aroma of wood are felt secondly, and geometric design and shape are often presented thirdly, and recycling is available fourthly, and it is expensive finally. In order to revitalize the wooden toys lagging behind the cheap and diverse toys made of plastic, it is highly needed that development of the environment-friendly painting, unique design, marketing strategy of enterprises and use of domestic wood material.

• Journal of the Korean Wood Science and Technology
• /
• 제38권5호
• /
• pp.385-390
• /
• 2010

This study was carried out to manufacture very thin natural elm veneer overlaid charcoal board for enhancing aesthetic value of charcoal board for the indoor application, and to use the advantageous properties of the charcoal as a building material for solving the sick house problem. The thin elm veneer had 26.9% opening ratio. The experiment results showed that the spreading area and the nonvolatile content of adhesive did not affect the gas adsoprtion of fancy veneer overlaid charcoal board. The natural thin elm veneer overlaid charcoal board enhanced not only the aesthetic beauty but also showed the same gas adsorption by the charcoal board.

• Journal of the Korean Wood Science and Technology
• /
• 제51권5호
• /
• pp.410-418
• /
• 2023

In this study, the combustion characteristics of the Tulip tree, which is the representative broad-leaved afforestation tree in Korea, were analyzed. The flame retardant performance of the Tulip tree was analyzed by analyzing combustion characteristics on a total of three test samples; flame retardant treated, both flame retardant and oil stain-treated, and untreated. Then the flame retardance grade was classified for each of them. According to the result, test samples showed the strongest flame retardance were in order of flame retardant treated (C), both flame retardant and oil stain-treated (B), and untreated (A). As a result of analyzing the total heat emission and maximum heat emission rates, which is the evaluation standard for interior materials of Korean domestic buildings, test samples with flame retardant treat or flame retardant and oil stain treat were qualified for the flame-retardant standard. Both flame retardant and oil stain-treated samples showed higher total heat release (THR) and heat release rate compared to flame retardant-treated samples as the oil causes combustion with oxygen. On the other hand, they didn't qualify the THR in Quasi-non-combustible standards. To determine the correlation between the physical and combustion characteristics of wood, the combustion characteristics of other diffuse porous wood species, with which the Tulip tree is affiliated were analyzed, and noticed that the characteristic correlates with the density and quantity of wood. The results of this study are expected to be used as basic information on the combustion characteristics of the Tulip tree.

• Interaction and multiscale mechanics
• /
• 제5권3호
• /
• pp.229-265
• /
• 2012

Hygroexpansion of wood is a known and undesired characteristic in civil engineering. When wood is exposed to changing environmental humidity, it adsorbs or desorbs moisture and warps. The resulting distortions or - at restrained conditions - cracks are a major concern in timber engineering. We herein present a multiscale model for prediction of the macroscopic hygroexpansion behavior of individual pieces of softwood from their microstructure, demonstrated for spruce. By applying poromicromechanics, we establish a link between the swelling pressure, driving the hygroexpansion of wood at the nanoscale, and the resulting macroscopic dimensional changes. The model comprises six homogenization steps, which are performed by means of continuum micromechanics, the unit cell method and laminate theory, all formulated in a poromechanical framework. Model predictions for elastic properties of wood as functions of the moisture content closely approach corresponding experimental data. As for the hygroexpansion behavior, the swelling pressure has to be back-calculated from macroscopic hygroexpansion data. The good reproduction of the anisotropy of wood hygroexpansion, based on only a single scalar calibration parameter, underlines the suitability of the model. The multiscale model constitutes a valuable tool for studying the effect of microstructural features on the macroscopic behavior and for assessing the hygroexpansion behavior at smaller length scales, which are inaccessible to experiments. The model predictions deliver input parameters for the analysis of timber at the structural scale, therewith enabling to optimize the use of timber and to prevent moisture-induced damage or failure.

• 한국환경과학회지
• /
• 제21권1호
• /
• pp.97-103
• /
• 2012

Suspended wood waste was being inflow into the dam and the problem of waste disposal has been occurred. In this study, ethanol production using woody floater wastes was performed to estimate value in use for raw material of renewable energy. To achieve the goal, experiments of acid hydrolysis and ethanol fermentation using dam woody floater as raw materials for bioethanol was carried out. In the results of field survey in the chungju dam, kind of woody floater was mainly Japanese larch (Larix leptolepis) and hybrid poplar (Populus tomentiglandulosa). The results of sugar extraction showed that sugar content was higher in Larix leptolepis than Populus tomentiglandulosa. Extracted sugar from wood waste was effective consumed by yeast(P. Stipitis and S cerevisiae). In the experiment consumption of sugar including glucose, galactose and xylose, the consumption rate of S. cerevisiae is faster than that of P. stipitis. and efficiency for ethanol production is higer in S. cerevisiae than P. stipitis. Also it can be confirmed that resource as ethanol production using wood waste was available.