The spindle unit is a core part in high precision machine tool. Rotation accuracy of spindle unit is needed for high dignity cutting and improving the performance of machine tool. However, there are many factors to effect to rotational error motion(rotation accuracy). This study studied how rotational error motion is variation when unbalance amount is variation. Rotation accuracy of initial spindle unit is decided depending on parts and assembly such as bearing. When it is rotation, vibration and noise is appeared depending on volume of unbalance amount, so it works to decrease unbalance amount. The purpose of the study tests that unbalance amount how much effects to initial rotation condition. The result of the study shows that accuracy of parts and assembly is highly necessary to reach high rotation accuracy and unbalance amount hardly effects to initial rotation accuracy. However, it shorten spindle's life because vibration and noise is increasing by increasing unbalance amount and we can expect situation that rotation accuracy is falling by long time operation.
지적재조사사업은 지적공부의 등록사항을 조사·측량하여 기존의 지적공부를 디지털에 의한 새로운 지적공부로 대체함과 동시에 지적공부의 등록사항이 토지의 실제 현황과 일치하지 아니하는 경우 이를 바로 잡기 위하여 실시하는 국가사업이며 사업기간은 일반적으로 1년 6개월 내지 2년 정도 소요되지만 토지소유자간의 이해관계가 얽혀 복잡한 구조 및 내적 갈등으로 지적재조사 측량을 마치고 조정금 과정에서 발생되는 문제점으로 소요기간이 길어지고 있는 실정이다. 현실경계로 경계를 설정한 이후 토지소유자별로 필지의 면적을 확정하고 지적소관청은 확정된 면적과 지적공부상 면적의 증감에 따라 조정금 산정으로 정산하여 지적재조사사업을 완료하도록 하고 있다. 따라서 조정금과 관련하여 조정금 산정의 시기 및 조정금 산정방법에 대하여 적용한 실증연구를 통하여 합리적인 조정금이 적용될 수 있도록 해결방안을 제시하였다. 개선방법을 통하여 토지소유자와 합의를 최단기간으로 이끌 수 있는 기대효과가 나타났으며 지적재조사사업의 본 취지에 부합하는 현실경계로 설정이 가능하다는 효과도 나타났다. 지적재조사사업과 병행연구를 통하여 표준지 조정금 산정 방법과 조정금 부과방식과 조정금이 부과 되지 않는 경계조정방식의 개선방안을 제시한 본 연구로 지적재조사사업이 2030년까지 완료될 수 있기를 기대한다.
Often a network becomes complex, and multiple entities would get in charge of managing part of the whole network. An example is a utility grid. While the entire grid would go under a single utility company's responsibility, the network is often split into multiple subsections. Subsequently, each subsection would be given as the responsibility area to the corresponding sub-organization in the utility company. The issue of how to make subsystems of adequate size and minimum number of interconnections between subsystems becomes more critical, especially in real-time simulations. Because the computation capability limit of a single computation unit, regardless of whether it is a high-speed conventional CPU core or an FPGA computational engine, it comes with a maximum limit that can be completed within a given amount of execution time. The issue becomes worsened in real time simulation, in which the computation needs to be in precise synchronization with the real-world clock. When the subject of the computation allows for a longer execution time, i.e., a larger time step size, a larger portion of the network can be put on a computation unit. This translates into a larger margin of the difference between the worst and the best. In other words, even though the worst (or the largest) computational burden is orders of magnitude larger than the best (or the smallest) computational burden, all the necessary computation can still be completed within the given amount of time. However, the requirement of real-time makes the margin much smaller. In other words, the difference between the worst and the best should be as small as possible in order to ensure the even distribution of the computational load. Besides, data exchange/communication is essential in parallel computation, affecting the overall performance. However, the exchange of data takes time. Therefore, the corresponding consideration needs to be with the computational load distribution among multiple calculation units. If it turns out in a satisfactory way, such distribution will raise the possibility of completing the necessary computation in a given amount of time, which might come down in the level of microsecond order. This paper presents an effective way to split a given electrical network, according to multiple criteria, for the purpose of distributing the entire computational load into a set of even (or close to even) sized computational loads. Based on the proposed system splitting method, heavy computation burdens of large-scale electrical networks can be distributed to multiple calculation units, such as an RTDS real time simulator, achieving either more efficient usage of the calculation units, a reduction of the necessary size of the simulation time step, or both.
Three materials for sport underwear were manufactured by order for study, and among them, suitable material in order to perform an experiment on the effect of wearing was adopted. The results are as follows: The result of wearing an experimental clothes for sports manufactured as a foundation-type underwear for sports showed that if the same compositional materials were applied, laminating material had higher rate than that of others in the amount of sweat. Concerning relative humidity in clothes and the amount of sweat absorbed in clothes among the two kinds of materials which were produced by laminate, material 2(nylon+modal) was statistically exerts higher influence on the amount of sweat. The humidity in clothes keeps the optimal condition of 59.8%, and breast part showed the highest relative humidity. The material 2(nylon+modal) showed the highest comfortableness, the sense of warmth, humidity and voluminousness, and the sense of pressure. Follow-up survey revealed that in case of material 2, higher amount of sweat than that of the group objects in its early phase, and the amount of sweat varies from individuals. The temperature in clothes of folded parts of experimental clothes and maximum surface temperature was equivalent to that of average skin. With the lapse of time, the weight decreased of 11.03% in maximum, and 3.12% in minimum. The amount of change in the girth was greater in part of body frame than that of limbs, and especially, navel and waist part showed high decrease, and upper breast, breast and the largest part of abdomen showed relatively low decrease. The above experiment revealed that materials for suitable to the underwear for sports for loss of weight by an exercise should be made of doubled-nylon and modal, along with the laminate processing, which heightens the amount of sweat. Thus, wearing an experimental wear gave satisfaction in the view of the beauty of appearance as it did not discharge flowing secretion to the outside at the time of exercise.
Welding quality is closely related to the arc state. So, it is very important to estimate the arc state in real time. In the short circuit transfer region of CO2 are welding, the spatter , as it is well known, is mainly generated on an instance of short circuit or on an instance that the are is ignited after short circuit, or on the cases of an instantaneous short circuit. If the short circuit period or the arc time is irregular, the spatter is generated more than it is regular. Thus there is a close relationship of the amount of the spatter generation with the arc stability. In this paper, to develop the index for estimating the arc stability in short circuit transfer range Of CO2 arc welding, the welding current and are voltage waveforms were measured and the spatter generated was captured and measured. The correlation analysis of the measured amount of the spatter with the factors (the components and the standard deviations of the components) was performed, and the factors that have a considerable influence on the spatter generation among all factors were selected. And some cases of models consisted of the factors were presented, and a mathematical index model which can make an estimation the amount of the spatter from these models with multiple regression analysis. Also, it was compared how much the amount of the spatter generated under the selected welding conditions do these index models fit, and the index model to estimate the arc stability which represent the spatter generation most appropriately was developed
This Study was an attempt to estimate the optimum numbers of Operating Room Nursing Manpower by measuring the amount of service hours required by the patients in Operating Room in relation to the service amount actually provided by the nurses. The major concern of this study was placed on the measurement of Nursing Service Requirements by using the Operating Room (O. R) Patient Acuity System recently developed by M. M. Hart to classify the O. R. patients into four groups according to the degree of the complexity of operative procedure and some other elements which increase nursing activities in respect of patient care; Acuity IV group is the one requires nursing services most, on the other hand Acuity I requires least. nu sing The objectives of this study were as follows; 1. To analyze functions of the nursing personnel in O. R. by time unit and to estimate the average time a nurse can activate for productive functions. 2. To measure the actual amount of nursing times provided by nurses to the surgical patients. 3. To develop a patient classification system in order to measure the amount of Nursing services required by the patients. 4. To calculate an appropriate number of nursing manpower to meet the needs of the patients. In order to conduct the research both selected nurses and patients in 'S' University Hospital were Studied by utilizing the O. R. Patient Acuity System as well as the Classification Chart developed by Association of Operating Room Nurses (A. O. R. N) as a means of classifying functions of O. R. nurses. That is; Functions of the 10 selected O. R. nurses observed during the period of June 30 to July 4, 1986, whereas the amount of nursing services required by or provided to the 974 patients who had received surgeries during the period of June 9 to July 4, 1986. The results of this study were as follows; 1) The actual working hours per a nurse averaged 6.7 hours a day. 2) Each nurse's daily routine schedule consists of $71.4\%$ for Technical Functions, $16.1\%$ for Nonprodective Functions, $6.6\%$ for Assessment and Evaluation, $3.9\%$ for Overseeing and Supervision and the rest $2.0\%$ for Patient Preparation respectively. 3) Preoperative waiting time per a patient was 24.1 minutes on the average; for the first case was 10.7 minutes, whereas for the following cases was 32.0 minutes. 4) Total Operation time for the 974 patients during the period of observation for this study amounted to 2759.6 hours, weekly hour was equivalent to 689.9 hours, Whereas daily operation time averaged 130 hours. Meanwhile the average operation time per patient was 2.8 hours ; for the case of Acuity IV was 5.6 hours, 5. 1 hours for the case of Acuity III, 2.3 hours for Acuity II and 1.1 hours for Acuity I. 5) According to the O. R. Patient Acuity System, $64.5\%$ of the whole patients belonged to Acuity II, $23.7\%$ to Acuity III, 11. $3\%$ to Acuity IV and $0.7\%$ to Acuity I respectively. 6) Required amount of nursing times based on the preoperative waiting time and operation time was 7167.8 person hours, which showed that $5.5\%$ of them needed for preoperative nursing care, whereas the rest $94.5\%$ for intraoperative nursing care. In terms of the O. R. Patient Acuity System, $49.7\%$ of total nursing service requirements was needed for Acuity II patients, $27.4\%$ for Acuity III patients, $17.2\%$ for Acuity IV patients and $0.2\%$ for Acuity I patients. 7) The rate of the nursing services provided against the required nursing times was about $81.4\%$ on the average; some departments, like those of Plastic Surgery, Otolaryngology and Ophthalmology whose patients mostly belonged to Acuity II recorded hegher provision rate than average, whereas other departments of Thoracic Surgery. Neurosurgery and Orthopedic Surgery whose patients belonged to Acuity III and Acuity IV as well as Acuity II recorded lower provision rate than average. 8) Subsequently, required numbers of nursing manpower was 10.7 nurses additionally. Based on the above findings the following recommendations will be made; 1) this study recommends, develops. and adopts an accurate and realistic O. R. Patient Acuity System which can help measure the nursing service requirements objectively to elicit the rationales of allocation of nursing personnels. 2) this study proposes storongly place nurses who take the role of preoperative nursing care exclusively for the waiting patients in O. R. and shortening their waiting time by close communication between the designated O. R. and the ward.
The examination of the pollutants originated from domestic sewage, industrial and agricutural activities the existences of some toxic heavy metals, organic matters and pathogenic microorganisms. A recent report of WHO brought out that such pollutants are in existence with above roughly 2,000 kinds of chemical substances and amongst them about 750 chemicals have been indentified by drinking water. And above 600 kinds of them are organic pollutants and in addition these include carcinogenic mutagenic and poisonous substances. This is not intended to embody a study of broad confined to various approaches on organic materials, and therefore will be THM produced on injection of chlorine at water filtration plant. To specify the relations between THM and factors having an effect upon THM such as TOC, Cl$_{2}$, Temperature, pH and reaction time, first of all the recovery ratio for analytical methods of THM (Head sapce, purge and trap, Liquid/ Liquid Extraction methods) was investigated. Provided that by using it,the correction coefficients are obtained, the accuracy of data might be able to be enhanced through analysis.The result of the experiments are given in the followings. 1) Among three kinds of analytical methods, recovery rate was higher in order of purge and trap Liquid/Liquid Extraction, Head space. There is no great difference in recovery rate among three methods. 2) The higher the concentration of TOC, the more the amount of THM. 3) The higher the reaction temperature, the more the amount of THM. 4) The longer the reaction time, the more the amount of THM. 5) The higher the pH, the more the amount of THM. 6) The higher the concectration of chlorine, the more the amount of THM.
이 연구는 원전 콘크리트 배합설계를 모사한 콘크리트 시험체에 대하여 염수침지 실험을 수행하였으며, 시험체 깊이에 따른 염화물량과 XRF 성분의 상관관계를 분석하였다. 원전 콘크리트의 표면부의 염화물량은 염수 침지기간이 증가함에 따라 소폭 증가하였으나, 깊이 5.5 mm 이상의 콘크리트 시험체 내부 염화물량은 염수 침지기간이 증가함에 증가하는 경향이 뚜렷하게 나타났다. 콘크리트의 염화물량과 XRF 성분의 상관관계 분석결과, OPC 배합과 비교하여 FA가 20% 치환된 배합은 XRF 성분분석을 통한 Cl 이온의 구성비율과 염해저항성 평가결과의 상관관계가 매우 높게 나타났다. 이에 따라 FA가 20% 치환된 원전 콘크리트 배합에서는 반복적인 데이터 누적을 통해 XRF 성분분석을 통하여 염소이온분석 및 염해저항성능 평가가 가능함을 확인하였다.
The possibility of using polypyrrole as a drug delivery system(DDS) has been studied using indicate (Phenol red) and substance with therapeutic activity(Sodium salicylate). In aqueous solution, negative potential is applied to polypyrrole then anion(with therapeutic activity) of sodium salicylate is released by redox processes of polypyrrole. The release amount of anionic drugs from polypyrrole is measured by UV-visible spectrometer which can measure UV-absorbance of materials. Electrode area that use for release amount measurement is$50mm^{2}(5{\times}10mm)$,and thickness of polypyrrole membrane is $15{\mu}m$. DC 1V applied in saline solution, the release amount according to time increased gradually. In various electrode area, release amount of anionic drug is directly to electrode area.
Objectives: This study evaluated the skin permeability of lawsone in henna hair dyes to understand the exposure characteristics of henna hair dyes in the human body. It examined the protective effects of protectants by applying protectants A, B, and C to test skin. Methods: Skin absorption tests were conducted using Franz diffusion cells according to OECD test guideline 428. After applying one kind of natural henna hair dye and chemical henna hair dye, respectively, to a standardized pig skin model, samples of receptor fluid were collected at 1h, 3h, 6h, and 24h. The skin permeation of lawsone was determined using HPLC. After the skin absorption experiment, the skin to which hair dye was applied was analyzed to determine the residual amount of lawsone in the skin. Results: The cumulative permeation of both natural and chemical henna hair dyes increased over time, and the natural henna hair dye had a flux value (t=3.194, p<.05) high both in the Kp value (t=3.207, p<.05) and the residual amount (t=22.701, p<.001). For skin treated with a protectant, the cumulative permeation of natural henna hair dye 24h control and the cumulative permeation of protectant A, B, and C increased over time. Flux and Kp values were in the order control > protectant A > protectant C > protectant B. The residual amount (F=4.469, p<.05) was in the order of protectant C > protectant A > protectant B > control. At 3h, the dye application time of natural henna hair dye, the lawsone flux value (F=4.454, p<.05) and Kp value (F=4.455, p<.05) were higher in the control group than in the protectant groups. The 24h cumulative permeation of the chemical henna hair dye increased with time in both the control and the protectant groups, and the flux and Kp values were in the order of protectant A > protectant C > protectant B > control. The residual amount (F=7.901, p<.01) was in the order of protectant B > protectant A> protectant C > control. Conclusions: Within the normal dyeing time for henna hair dye (three hours for natural henna hair dyes and 30 minutes for chemical henna hair dyes) lawsone skin penetration was not observed even when no protective agent was applied. After that time, however, evidence of skin penetration and retention of lawsone and the protective effect of protective agents were observed.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.