• Journal of Acupuncture Research
• /
• v.19 no.3
• /
• pp.64-76
• /
• 2002

Objective : The purpose of this study is to investigate the mechanism and effect of moxibustion objectively and to be used as the quantitative data for developing the new thermal stimulating treatment by observing the combustion characteristics of commercial moxaes. Methods : We have selected two types(large-size moxa A(LMA), large-size moxa B(LMB)) among large moxaes used widely in the clinic. We examined combustion times, temperatures, temperature gradients in each period during a combustion of moxa. Results : 1. The ascending temperature gradient measured in the central point of non-contacted surface was fastest, the average ascending temperature gradient of both moxaes was $0.0384^{\circ}C/sec$, $0.0123^{\circ}C/sec$ respectively, 3.1 times faster in LMA. The maximum ascending temperature gradient was also about 2.9 times faster in LMA. The time required for the maximum ascending temperature gradient from ignition was 254sec, 411sec respectively. 2. The minimum descending temperature gradient in the retaining period was $-0.0250^{\circ}C/sec$, $-0.0090^{\circ}C/sec$ respectively and the average descending temperature gradient was $-0.0160^{\circ}C/sec$, $-0.0037^{\circ}C/sec$ respectively on the non-contact surface. 3. On the basis of the non-contact surface($A_I$), the time at which the effective stimulus period began to occur was about 264sec, 796sec respectively after an ignition, the time at which the maximum temperature began to occur was about 373sec, 1323sec respectively after an ignition, and the maximum temperature was $0.9^{\circ}C$ higher in LMA. The maximum ascending temperature gradient was also about 4.2 times faster in LMA. Conclusion : It was thought that not only the figure of moxicombustion device, but also the form and size of moxa had influence on the combustion characteristics deciding the performance of stimulus seriously.

• Journal of Environmental Health Sciences
• /
• v.19 no.4
• /
• pp.51-58
• /
• 1993

The integrated solid waste management for Seoul Metropolitan city can be established on the basis of the following hierarchy of priorities: 1. Efforts for source reduction should be propelled by both government and citizens to achieve the effects of resource conservation. The adequate production and consumption which are environmentally amenable and sustainable can be induced by the reasonable imposition of deposit money for waste treatment to one-time use products. To accomplish source reduction effectively, the induction of legal and institutional regulation of producer and consumer participation is requisite. 2. For resource recovery, wastes generated should be recycled as far as practicable. Community residents are responsible to separate discharge, the authorities concerned have responsibility of separate collection, and recycling industry should be assissted through tax reduction and financing. Resource separation facilities can be constructed at Kimpo Metropolitan landfill site for wastes not separately collected due to some unavoidable circumstances. 3. Garbage should be composted. Garbage is uneconomical for incineration, because it has high moisture content and low calorie, thus there is no reason for the incineration of garbage even though garbage is classified into combustibles. Composting facilities can be located at sites which are not densely populated and easily accessible to transportation, for example, Kimpo Metropolitan landfill site. Compost produced can be managed by the authorities for the use of fertilizer to a green tract of suburban land and farms. 4. Nonhazardous combustible wastes not recyclable can be utilized for thermal recovery at the incinerators which are completely equipped with pollution control devices. According to the trend of local autonomy and the equity principle of local autonomous entities, incineration facilities of minimal capacity required can be constructed at each districts of Seoul Metropolitan city which have organized local assembly. In case of Yangcheon district, the economically combustible waste quantity is about 260 tons/day which exceeds 150 tons/day, the incineration capacity of existing facility. But, from now on, waste quantity can be reduced substantially by the intensive efforts of citizens for source reduction and recycling and the institutional support of administrative organizations. Especially, it is indispensable for the government to constitute institutional and technological bases that can recycle paper and plastics form 43% of waste generated. A good time for constructing of incineration facilities for municipal solid waste can be postponed to the time that pollution control technologies of domestic enterprises are fully developed to satisfy the standards of air pollution prevention, because the life expectancy of Kimpo Metropolitan landfill site is about 25 years. Within this period, institutional improvements and technological advancements can be attained, while the air qual. ity of Seoul Metropolitan city can be ameliorated to the level to afford incineration facilities. 5. For final disposal, incombustibles and ash are landfilled sanitarily at Kimpo Metropolitan landfill site.

• Journal of Korea Foundry Society
• /
• v.38 no.5
• /
• pp.103-110
• /
• 2018

The effects of a heat treatment on the carbide formation behavior and mechanical properties of the cobalt-based superalloy X-45 were investigated here. Coarse primary carbides formed in the interdendritic region in the as-cast specimen, along with the precipitation of fine secondary carbides in the vicinity of the primary carbides. Most of the carbides formed in the interdendritic region were dissolved into the matrix by a solution treatment at $1274^{\circ}C$. Solutionizing at $1150^{\circ}C$ led to the dissolution of some carbides at the grain boundaries, though this also caused the precipitation of fine carbides in the vicinity of coarse primary carbides. A solution treatment followed by an aging treatment at $927^{\circ}C$ led to the precipitation of fine secondary carbides in the interdendritic region. Very fine carbides were precipitated in the dendritic region by an aging heat treatment at $927^{\circ}C$ and $982^{\circ}C$ without a solution treatment. The hardness value of the alloy solutionized at $1150^{\circ}C$ was somewhat higher than that in the as-cast condition; however, various aging treatments did not strongly influence the hardness value. The specimens as-cast and aged at $927^{\circ}C$ showed the highest hardness values, though they were not significantly affected by the aging time. The specimens aged only at $982^{\circ}C$ showed outstanding tensile and creep properties. Thermal exposure at high temperatures for 8000 hours led to the precipitation of carbide at the center of the dendrite region and an improvement of the creep rupture lifetimes.

• Resources Recycling
• /
• v.15 no.2 s.70
• /
• pp.50-57
• /
• 2006

Production of activated carbon from woody fish parking cases has been studied using waste sulfuric acid as an activating agent for the purpose or promoted recycling of woody fishing port wastes. The adsorption capacity of produced activated carbon was observed to increase with activation temperature and reached its maximum at ca. $650^{\circ}C$ under the experimental conditions. However, the adsorption capacity of activated carbon became deteriorated above this temperature due to the thermal degeneration of its structure. Optimal activation time was found to be about 120 minutes and 1:3 weight ratio of raw material and activating agent was appropriate for increased adsorption capacity of activated carbon under the conditions of $550^{\circ}C$ and 60 minutes of activation time. Regarding the effect of the concentration of activating agent on activation, ca. 1.2 M of sulfuric acid was observed to be proper for an optimal activation or raw material. Comparison of the activation power of sulfuric acid with nitric acid showed that sulfuric acid was superior to nitric acid, however, with regard to the yield of activated carbon there was no significant difference between the two activating agents. The degree of dispersion of carbon particles was shown to be relatively high in neutral condition and the produced activated carbon was considered to be effectively employed for the treatment of metal ions in wastewater due to its negative surface charge in aqueous condition.

• Korean Journal of Food Science and Technology
• /
• v.22 no.7
• /
• pp.799-801
• /
• 1990

Of the several methods proposed for decreasing toxicity of Paralytic shellfish poison(PSP) from intoxicated shellfish, heat treatment has been most popular, although a large percentage of the incidents of PSP illness have been related to the ingestion of cooked shellfish. The purpose of this study was to determine the kinetics of PSP destruction at various temperatures. The homogenate of intoxicated blue mussel(Mytilus edulis) was heated at temperature ranging from $90\;to\;121^{\circ}C$ and toxicities measured in samples heated for various time intervals. The rate constant(k) per second was $3{\times}10^{-4},\;at\;90^{\circ}C,\;4.98{\times}10^{-4},\;at\;100^{\circ}C,\;7.38{\times}10^{-4},\;at\;116^{\circ}C,\;and\;8.38{\times}10^{-4},\;at\;121^{\circ}C,\;$. By the Arrhenius equation, the decimal reduction time(D-value) was $121min.\;at\;90^{\circ}C,\;82min,\;at\;100^{\circ}C,\;58min.\;at\;116^{\circ}C\;and\;53min.\;at\;121^{\circ}C$. The z-value, activation energy($E_a\;and\;Q_{10}$) was $72^{\circ}C,\;3.9{\times}10^7(J/kg\;mol)$ and 1.39, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.5
• /
• pp.447-454
• /
• 1991

Chopped garlic was added to beef to determine its effect on the protein digestion during storage and heat treatment. The digestibility of raw beef without garlic was not significantly changed during storage at $4^{\circ}C$, but increased as garlic added and aging time increased. The optimal aging time and amount of garlic added was varied with heating time. Trypsin inhibitor did not change the digestibility of beef due to its thermal inactivation. Gel chromatography revealed that the lower molecular weight peptides(2,200~6,150 dalton) were shown in beef-garlic mixture through aging and heating procedure. When aged beef with garlic was digested with four-enzyme system, the soluble portion was increased significantly in comparison with that from raw beef without garlic. Protein quality of beef, as measured by computed PER(C-PER), was improved from 2.14 of raw beef to 2.50 of aged beef with chopped garlic.

• Korean Journal of Plant Resources
• /
• v.10 no.2
• /
• pp.169-174
• /
• 1997

This study was conducted to obtain basic information needed to develop the effective weed control method by using thermal weeder which uses LPG as fuel. For survey of weed distribution in herb field, weed species were investigated at two kinds of herb field of Codonopsis lanveolata and Aster scaber located in Hoengseongkun and Hwacheonkun, Kangwondo. In Codonopsis lanveolata field, Digitaria sanguinalis and Persicaria viridis L were dominated. In Aster scaber field, Digitaria sanguinalis and Erigeron canadensis were dominated. In general, Grasses weeds in herb were more dominated than other broadleaf and Cyperaceae weeds. The treatments of $H_2SO_4$ in weed seeds were more effective for germination of several weeds, compared with that nontreated weed seeds. However, the rate of germination differed depending on weed species and tereatment time of $H_2SO_4. Also, viability of weed seeds was significantly affected by irradiation time and temperature. As the temterature and treatment time of irradiation increased, the rate of germination was decreased.

• Analytical Science and Technology
• /
• v.21 no.6
• /
• pp.487-494
• /
• 2008

An experiment was performed for zone refined Re-filament and normal (nonzone refined) Re-filament to reduce the background effect on the measurement of low level uranium samples. From both filaments, the signals which seemed to come from a cluster of light alkali elements, $(^{39}K_6)^+$, $(^{39}K_5+^{41}K)^+$ and $PbO_2$ were identified as the isobaric effect of the uranium isotopes. The isobaric effect signal was completely disappeared by heating the filament about $2000^{\circ}C$ at < $10^{-7}$ torr of vacuum for more than 1.5 hour in zone refined Refilaments, while that from the normal Re-filaments was not disappeared completely and was still remained as 3 pg. of uranium as the impurities after the degassing treatment was performed for more than 5 hours at the same condition of zone refined filaments. A threshold condition eliminating impurities were proved to be at 5 A and 30 minutes of degassing time. The uranium content as an impurity in rhenium filament was checked with a filament degassing treatment using the U-233 spike by isotope dilution mass spectrometry. A 0.31 ng of U was detected in rhenium filament without degassing, while only 3 pg of U was detected with baking treatment at a current of 5.5 A for 1 hr. Using normal Re-filaments for the ultra trace of uranium sample analysis had something problem because uranium remains to be 3 pg on the filament even though degassed for long hours. If the 1 ng uranium were measured, 0.3% error occurred basically. It was also conformed that ionization filament current was recommended not to be increased over 5.5 A to reduce the background. Finally, the contents of uranium isotopes in uranium standard materials (KRISS standard material and NIST standard materials, U-005 and U-030) were measured and compared with certified values. The differences between them showed 0.04% for U-235, 2% for U-234 and 2% for U-236, respectively.

• Korean Journal of Food Science and Technology
• /
• v.36 no.1
• /
• pp.58-63
• /
• 2004

Cell-separating enzymes were used to investigate enzymatic maceration of watermelon and muskmelon containing single cells. Watermelon and muskmelon were macerated with Macerozyme A and Sumyzyme MC for 30-120min. Changes in maceration properties such as yields, color, viscosity, total sugar, total pectin, total polyphenol, particle size distribution, minerals, and free amino acids of suspensions after enzymatic disintegration were investigated. Contents of biochemical components in the supernatant of suspensions increased with increasing treatment time. Suspensions containing single cells showed good thermal stability without affecting original qualities. Mineral content of single-cell suspension was higher than those of watermelon and muskmelon juices. Potassium contents of single-cell suspension and juice were 240.8 and 172.7 mg%, respectively. Results suggest single-cell suspensions of watermelon and muskmelon can he utilized as ingredients for new beverages.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.2
• /
• pp.34-45
• /
• 2016

Global warming and climate change have been caused by combustion of fossil fuels. The greenhouse gases contributed to the rise of temperature between $0.6^{\circ}C$ and $0.9^{\circ}C$ over the past century. Presently, fossil fuels account for about 88% of the commercial energy sources used. In developing countries, fossil fuels are a very attractive energy source because they are available and relatively inexpensive. The environmental problems with fossil fuels have been aggravating stress from already existing factors including acid deposition, urban air pollution, and climate change. In order to control greenhouse gas emissions, particularly CO2, fossil fuels must be replaced by eco-friendly fuels such as biomass. The use of renewable energy sources is becoming increasingly necessary. The biomass resources are the most common form of renewable energy. The conversion of biomass into energy can be achieved in a number of ways. The most common form of converted biomass is pellet fuels as biofuels made from compressed organic matter or biomass. Pellets from lignocellulosic biomass has compared to conventional fuels with a relatively low bulk and energy density and a low degree of homogeneity. Thermal pretreatment technology like torrefaction is applied to improve fuel efficiency of lignocellulosic biomass, i.e., less moisture and oxygen in the product, preferrable grinding properties, storage properties, etc.. During torrefacton, lignocelluosic biomass such as palm kernell shell (PKS) and empty fruit bunch (EFB) was roasted under an oxygen-depleted enviroment at temperature between 200 and $300^{\circ}C$. Low degree of thermal treatment led to the removal of moisture and low molecular volatile matters with low O/C and H/C elemental ratios. The mechanical characteristics of torrefied biomass have also been altered to a brittle and partly hydrophobic materials. Unfortunately, it was much harder to form pellets from torrefied PKS and EFB due to thermal degradation of lignin as a natural binder during torrefaction compared to non-torrefied ones. For easy pelletization of biomass with torrefaction, pellets from PKS and EFB were manufactured before torrefaction, and thereafter they were torrefied at different temperature. Even after torrefaction of pellets from PKS and EFB, their appearance was well preserved with better fuel efficiency than non-torrefied ones. The physical properties of the torrefied pellets largely depended on the torrefaction condition such as reaction time and reaction temperature. Temperature over $250^{\circ}C$ during torrefaction gave a significant impact on the fuel properties of the pellets. In particular, torrefied EFB pellets displayed much faster development of the fuel properties than did torrefied PKS pellets. During torrefaction, extensive carbonization with the increase of fixed carbons, the behavior of thermal degradation of torrefied biomass became significantly different according to the increase of torrefaction temperature. In conclusion, pelletization of PKS and EFB before torrefaction made it much easier to proceed with torrefaction of pellets from PKS and EFB, leading to excellent eco-friendly fuels.