• Journal of the Korean Vacuum Society
• /
• v.15 no.3
• /
• pp.259-265
• /
• 2006

We measured sputtering yield of RF $O_2-plasma$ treated MgO protective layer for AC-PDP(plasma display panel) using a Focused ion Beam System(FIB). A 10 kV acceleration voltage was applied. The sputtering yield of the untreated sample and the treated sample were 0.33 atoms/ion and 0.20 atoms/ion, respectively. The influence of the plasma-treatment of MgO thin film was characterized by XPS and AFM analysis. We observed that the binding energy of the O 1s spectra, the FWHM of O 1s spectra and the RMS(root-mean-square) of surface roughness decreased to 2.36 eV, 0.6167 eV and 0.32 nm, respectively.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.4
• /
• pp.65-70
• /
• 2008

The mechanical shear strength of BGA(Ball Grid Array) solder joints under high impact loading was investigated. The Sn-37Pb solder balls with a diameter of $500{\mu}m$ were placed on the pads of FR-4 substrates with ENIG(Electroless Nickel Immersion Gold) surface treatment and reflowed. For the High Temperature Storage(HTS) test, the samples were aged a constant testing temperature of $120^{\circ}C$ for up to 250h. After the HTS test, high speed shear tests with various shear speed of 0.01, 0.1, 1, 3 m/s were conducted. $Ni_3Sn_4$ intermetallic compound(IMC) layer was observed at the solder/Ni-P interface and thickness of IMC was increased with aging process. The shear strength increased with increasing shear speed. The fracture surfaces of solder joints showed various fracture modes dependent on shear speed and aging time. Fracture mode was changed from ductile fracture to brittle fracture with increasing shear speed.

• Journal of Korean Society of Forest Science
• /
• v.88 no.4
• /
• pp.533-540
• /
• 1999

We observed that the thick outer bark layer of Quercus variabilis hindered oak longicorn beetle (Moechotypa diphysis) from laying its eggs in inner bark (secondary phloem tissues). The outer bark thickness of Q. variabilis was average of 7.4mm, while those of Q. mongolica. Q. serrata and Q. acutissima were average of 1.1mm, 1.3mm and 2.0mm, respectively. Inner bark thickness was 4.8mm in Q. acutissima and 3.6-3.9mm in the other oak species. The outer shape of ovipositional holes on the bark by the longicorn beetle was $8-12mm{\times}6-8mm$ wide oval in Q. variabilis, whereas $5-9mm{\times}1-5mm$ narrow fusiform in the other oak species. Oak longicorn beetle drilled average of three ovipositional holes per a 1.2m-long log in a few Q. variabilis logs and its ovipositional rate was 15%. Compared to this, the longicorn beetle preferred Q. mongolica. All the 32 investigated logs of this oak species were drilled to have 20 ovipositional holes per a log and ovipositional rate was 56%. One third of the eggs laid already hatched in early June to damage the inner bark. It seems that oak longicorn beetle prefers oak species with smooth, thin and stable outer bark surface.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.1
• /
• pp.45-57
• /
• 2015

Soil moisture is critical for understanding the spatial-temporal variability of hydrologic processes. The distributions of soil moisture have been explored along transect line in hillslope hydrology. In this study, we measured several soil moistures along transect lines during ten-month period at a hillslope located the Cheong-mi catchment. The soil moisture properties were expressed by simple statistical methods (average, standard deviation, and recession slope) and analyzed in terms of soil depths and transects from the seasonal context. Supplementary studies were also performed about the effect of location, topography and soil texture to the soil moisture responses. The spatial distributions of average soil moisture at deep soil layer were distinguished from those at near surface due to the possibility of expected factors such as subsurface lateral flow from upslope, preferential flow and existence of bedrock. The soil moistures in combined line affected from significant contribution of upper transect line were relatively higher(wetter), low variability compared to those in other transect lines and seemed to be under stabilization process. There are confirmed heterogeneity of soil moisture variation related with preferential flow and significant influence of soil texture for soil moisture properties in upslope.

• Korean Journal of Materials Research
• /
• v.8 no.5
• /
• pp.408-412
• /
• 1998

Thermoelectric properties of Bi$_{2}$(Te$_{1-x}$Se$_{ x}$)$_{3}$(0.05$\leq$x$\leq$0.25) prepared by mechanical alloying and hot pressing, were investigated. Contrary to the p-type behavior of single crystals, the hot-pressed Bi$_{2}$(Te$_{1-x}$Se$_{ x}$)$_{3}$ exhibited ntype conduction without addition of donor dopant. When $Bi_2(Te_{0.85}Se_{0.15})_3$powders were annealed in (50% $H_2$ + 50% Ar) atmosphere, the hot-pressed specimen exhibited a positive Seebeck coefficient due to the reduction of the electron concentration by removal of the oxide layer on the powder surface and annealing-out of the excess Te vacancies. Among the Bi$_{2}$(Te$_{1-x}$Se$_{ x}$)$_{3}$fabricated by mechanical alloying and hot pressing, $Bi_2(Te_{0.85}Se_{0.15})_3$ exhibited a maximum figure-of-merit of 1.92 $\times$ $lO^{-3}$/K.

• 한국해양학회지
• /
• v.26 no.3
• /
• pp.181-192
• /
• 1991

Zooplankton were sampled horizontally with a standard net from the surface layer of the estuarine system of Mankyong River and Dongjin River in October, 1989, March, May, and July, 1990. Among dominant taxa of the zooplankton community, copepods were predominant in October, 1989 and March, 1990 and Noctiluca scintillans in May and July, 1990. Abundance of zooplankton showed considerable spatial and temporal fluctuations with a range of $12~9,256ind./m^3$ in wet weight. In the copepod community, Pseudodiaptomus inopinus and Paracalanus inducus were predominant in October, 1989: Acartia hudosonica and P. inducus in March, 1990; A. hudosonica and Centropages abdoinalis in May, 1990; A. pacifica, P. indicus and Tortanus spinicaudatus in July. 1990. In summer (July),there were large seasonal changes in salinity ($0.7~28.9\textperthousand$), due to monsoonal flooding, and associated changes in community structured of copepods. There were eight species of copepods in the mixo-mesohaline zone ($5.0~28.8\textperthousand$), namely Acartia pacifica, A. hudosonica, Centropages tenuiremis, C. abdominalis, Labidocera Euchaeta, Tortanus spinicaudatus, corycaeus affinis and Paracalanus indicus. On the other hand, Thermocouple hyalinus, Pseudodiaptomus inopinus and Sinocalanus tenellus occurred in the mixo-oligohaline zone ($0.5~5.0\textperthousand$), showing more tolerant of low salinity than any of the other species. In the mixoeuhaline zone ($>28.0\textperthousand$), Labidocera bipinnata, Oithona similes, Calanus sinicus, Acartia omorii and Tortanus forcipatus were founded.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.4 no.2
• /
• pp.65-72
• /
• 2018

Prostate specific membrane antigen (PSMA) is a cell surface membrane protein, which is overexpressed in most prostate cancer. Recently, PET imaging with $[^{68}Ga]$PSMA-HBED-CC has been widely used for the diagnosis of recurrent prostate cancer and the studies on the diagnostic potential of $^{64}Cu$-labeled PSMA ligands reported actively. In this study, we monitored with biological evaluation in vivo and PET imaging of $^{64}Cu$-labeled PSMA ligand ($[^{64}Cu]$PSMA-617). The radiolabelling efficiency and stability of $[^{64}Cu]$PSMA-617 were confirmed by radio-thin layer chromatography. The radiolabeling efficiency of $[^{64}Cu]$PSMA-617 showed over 95%, and stabilities of intact remained over 98% in both human and mouse serum for 48 h. In normal male mice, in vivo uptake of $[^{64}Cu]$PSMA-617 in several organs was measured at 2, 4, 6, 24, 48 h after injection. Rapid blood clearance was observed for $[^{64}Cu]$PSMA-617. The high uptake was observed in the lung, liver, intestines and kidneys at 2 h postinjection, but was low in the other organs (1-2 %ID/g) at 4 h. The dynamic PET/CT images of 22RV1 tumor-bearing nude mice were acquired during 60 min and additionally acquired 24 h and 48 h after injection. In dynamic PET images, $[^{64}Cu]$PSMA-617 uptake ratio in tumors versus muscle was increased as time elaplsed until 60 minutes and remained in tumors at 48 h. In these results, the PET/CT imaging using $[^{64}Cu]$PSMA-617 in prostate cancer is expected to be useful for the diagnosis and treatment of prostate cancer patients.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.69-83
• /
• 2023

Forest fires increase the risk of subsequent soil erosion and mass movement in burned areas, even under rainfall conditions below landslide alert thresholds, by destroying plants and vegetation and causing changes to soil properties. These effects of forest fires can alter runoff in burned areas by altering soil composition, component minerals, soil water repellency, soil mass stability, and soil fabric. Heat from forest fires not only burns shallow organic matter and plants but also spreads below the surface, affecting soil constituents including minerals. This study analyzed X-ray diffraction and physical properties of topsoil and subsoil obtained from both burned and non-burned areas to identify the composition and distribution of clay minerals in the soil. Small amounts of mullite, analcite, and hematite were identified in burned soils. Vermiculite and mixed-layer illite/vermiculite (I/V) were found in topsoil samples from burned areas but not in those from non-burned areas. These findings show changes in soil mineral composition caused by forest fires. Expansive clay minerals increase the volume of soil during rainfall, degrading the structural stability of slopes. Clay minerals generated in soil in burned areas are therefore likely to affect the long-term stability of slopes in mountainous areas.

• Applied Chemistry for Engineering
• /
• v.18 no.3
• /
• pp.227-233
• /
• 2007

Carbon/carbon (C/C) composites as unique materials possess exceptional thermal resistance with light weight, high stiffness, and strength even at high temperature. However, one serious obstacle for application of the C/C composites is their poor oxidation resistance in high temperature oxidizing environments. SiC coating has been employed to protect the composites from oxidation. This study explored combustion characteristics of 4-directional (4D) carbon/carbon composites using liquid fuel rocket engine to investigate ablative motion of the materials. C/C composites were made of coal tar pitch as a matrix precursor, and heat-treated at $2300^{\circ}C$. Throughout repeated densification process, the density of the material reached $1.903g/cm^3$. After machining 4D C/C composites, the nozzle surface was coated by a SiC layer by pack-cementation method to improve oxidation resistance. Erosion characteristics of SiC-coated C/C composites were measured as function of the ratio of oxygen to fuel. The morphological change of the composites after combustion test was investigated using SEM and erosion mechanism also was discussed.

• Journal of Bio-Environment Control
• /
• v.20 no.3
• /
• pp.241-245
• /
• 2011

The study was conducted to evaluate the effects of organic materials commonly used for rice culture on the soil chemical properties and yield and quality of rice. Treatments were applied on the surface layer after rice planting and included: A) Kumsugangsangold, commonly used as a nutrient source for organic rice culture in Chonnam province (compost I), B) Rice bran, containing large quantities of vegetable ingredient (compost II), C) Chamdalkom, manufacturing by-product fish (compost III), and D) Hangawi, mixing anmimal and vegetable ingredients (compost IV). Seasonal N-mineralization rate was faster on the compost I and III with lower C:N ratio than those of the compost II and IV. Soil chemiceal properties were not significantly affected by treatments. Seasonal organic matter was higher on the compost II and IV with high input of the organic materials than those of compost I and III, which would affect the level of biomass C. Higher rice yield treated by compost I was observed in year 1, but no significant difference was observed in years 2 and 3.