• 대한가정학회지
• /
• 제40권10호
• /
• pp.231-241
• /
• 2002

This study is for research of relationship between shoes wearing by adult woman and foot type. The research was made through questionnaire sheets of general matters (age, body weight, height & occupation) and shoes wearing status (hill height, toe shape, wearing time) of 216 adult women reside in the metropolitan zone and the foot type was classified from foot measurement and the relationship between shoes wearing and foot type was analyzed. According to the result of analysis it is as follows : 1) In the shoes type prefer for they prefer for lower hill as more ages and were preferring shoes with higher hill as the taller women. 2) The instep height is lower and medial foot angle was increased as their ages are more. Majority of foot type was appeared with standard type and the broad type was indicated more by age of 20s. The classification by toe the square type was indicated by majority and in the age of 30-40s the egyptian type was more 3) As the age and weight get increased he height of arch become lower and indicated to transit to flat-foot. That is to say they prefer for round toe in case of fiat-foot, and for square toe in case of normal and, choice of shoe toe shape it indicated by more impact by the height of arch rather than toe length.

• 대한인간공학회지
• /
• 제29권4호
• /
• pp.639-646
• /
• 2010

The APAM's quantitative effectiveness and comparative study in preventing and treating pressure ulcer has not been sufficiently evaluated mainly because of uncertainty of pressure load input and lack of interpretation of dynamic perfusion recovery characteristics of soft tissue. The purpose of this paper was to quantify and analyze the alternating pressure characteristics of APAM as a preventive measure for pressure ulcers. To quantify the alternating load to human body, we introduced alternating pressure profile concept and developed parametric model of the profile. Regarding pressure level and cycle time, 3 global and 7 local periodic parameters were used to define the profile such as light, standard, typical and heavy duty profile shape. Pressure impulse ratio of light duty is the lowest but pressure fluctuation is significantly high. For the same duty shape, contact conditions are changed with alternating cycle time and more dramatically in shorter alternating cycle time conditions. We can conclude that if we use shorter alternating cycle time on APAM's operation we can get more positive effects regarding to inflated contact time condition. We proposed the quantitative methods on tissue viability study of external loading by simultaneous measurement of interface pressure and tissue perfusion with proper alternating pressure profile conditions.

• 농업생명과학연구
• /
• 제50권4호
• /
• pp.113-125
• /
• 2016

본 시험은 성 성숙기의 한우 암송아지 18두(14개월령, 평균체중 251kg)를 이용하여 저 수준의 농후사료 급여에 따른 성장과 번식능력에 미치는 영향을 규명하기 위하여 실시하였다. 공시축은 시판 한우 번식우용 배합사료를 체중의 0.8%(T1) 및 1.2%(T2)씩 총 30개월(사양시험 20개월, 번식능력시험 10개월) 동안 섭취하였으며, 처리구당 9두를 2우리에 완전임의 배치를 하였다. 본 시험의 사양시험 결과를 한국가축사양표준의 영양소 요구량과 비교해 볼 때, T1구에서 성장이 제대로 되지 못한 이유는 에너지 보다는 단백질 섭취부족 때문인 것으로 나타났다. 공시축의 체형변화에서 저 영양수준으로 인하여 영향을 가장 많이 받는 부위는 흉폭과 체장이었으며 특히, 흉폭은 시험시작시보다도 종료시 측정치가 오히려 3.7% 작았다. 난소의 크기는 T1구가 T2구의 약 63%수준밖에 되지 않았으며, 수태율(33.3% : 77.8%)과 송아지의 생시체중(22.5kg : 29.5kg)도 T1구에서 심각하게 저하되었다. 따라서 한우번식우 사양에 있어서 성성숙기 이후에도 에너지보다는 단백질 공급수준에 의해 사양성적 및 번식능력에 많은 영향을 끼치는 것으로 나타났다.

• 대한지역사회영양학회지
• /
• 제1권2호
• /
• pp.178-188
• /
• 1996

Blood pressure distribution of adolescents and its several related factors including obesity were investigated through blood pressure measuring by automated oscillometric method, anthropometry, and questionnaire. Subjects were 480 female and 480 male middle school students living in Taejon. Mean values of systolic(SBP)/diastolic(DNP) blood pressure of male and female students were 118.4$\pm$11.0/69.5$\pm$9.6 mmHg and 116.9$\pm$10.4/69.5$\pm$8.6 mmHg, respectively. Their blood pressures, particularly SBP, increased with age and showed higher value in the males than in the females. All frequency distributions of SBP and DBP, by sex and age, showed normal curves and their 50th, 90th, and 95th percentiles were presented. As obese index increased, both SBP and DBP were elevated and the prevalence of hypertension which was classified by Task Force Report(1987) increased, particularly in male students. Body weight and BMI were positively correlated with both SBP and DBP, and hight was also positively correlated with SBP or DBP. Our data inicated that blood pressure and hypertension prevalence of adolescents tended to increase and various internal and external environmental factors affected them. It was emphasized that blood pressure measurement should be done in every medical examination of adolescents and the nationwide Korean standard of blood pressure for adolescents have to be prepared. (Korean J Community Nutrition 1(2) : 178-188, 1996)

• 센서학회지
• /
• 제19권1호
• /
• pp.17-24
• /
• 2010

This paper describes a real time reliable monitoring method and analysis system using wrist type oximeter for ubiquitous healthcare service based on IEEE 802.15.4 standard. Photoplethysmograph(PPG) is simple and cost effective technique to measure blood volume change. In order to obtain and monitor physiological body signals continuously, a small size and low power consumption wrist type oximeter is designed for the measurement of oxygen saturation of a patient unobtrusively. The measured data is transferred to a central PC or server computer by using wireless sensor nodes in wireless sensor network for storage and analysis purposes. LabVIEW server program is designed to monitor stress indicator from heart rate variability(HRV) and process the measured PPG to accelerated plethysmograph(APG) by appling second order derivatives in server PC. These experimental results demonstrate that APG can precisely describe the features of an individual's PPG and be used as estimation of vascular elasticity for blood circulation.

• 한국의류산업학회지
• /
• 제13권4호
• /
• pp.614-623
• /
• 2011

The purpose of this study is to develop a wedding dress basic torso pattern and sleeve pattern considering good fit and aesthetic for figures of Korean brides in their 20s. For the research method, 3 women in their 20s who has the body size of ${\pm}$ S.D range of average figure and dress form suggested by 'the 5th human body measurement' of Size Korea were selected as the test group. The evaluators are 8 clothing construction majors, and the evaluation items included total 22 questions related to torso and total 10 questions related to sleeves. The evaluation was made using 5 Likert point scale. 4 prototypes for basic dress pattern were selected through the literature search. After compare analyzing design methods of prototypes, the real wedding dresses were made in the average size of women in their 20s and the dresses were tried on for the assessment. The data was analyzed using SPSS 18.0 Program to examine average, standard deviation and significant differences between basic patterns. Based on the results of the first and the second try-on assessments, a new wedding dress basic pattern with maximized strengths of compared prototypes was completed. The details of result follows. As for dress torso basic pattern, A pattern, which had the highest overall silhouette satisfaction and scores in basic pattern analysis and try-on assessments, was selected as the prototype, and a research basic pattern reflecting strengths of each basic pattern was developed. As for dress sleeve basic pattern, B pattern, which had the highest overall silhouette satisfaction and scores in basic pattern analysis and try-on assessments, was selected as the prototype, and a research basic pattern reflecting strengths of each basic pattern was developed. In this study, a wedding dress basic pattern considering good fit and aesthetic for figures of Korean brides in their 20s was suggested. It is expected that the basic pattern will be used by continuously developing dress market and ready-made wedding dress manufacturers as well as in educational institutes.

• 한국의류산업학회지
• /
• 제8권1호
• /
• pp.99-106
• /
• 2006

With the growing interest in pet dogs and pet dog's wear I used this study to compare and analyze the pattern used by each supplier and developed a new pattern for pet dogs' wear which is appropriate for pet dogs' body lines and movement. Test subjects were 91 pet dogs in Busan and after comparing 3 patterns from different suppliers, I developed the pattern reflecting pet dogs' body shapes and movement. Results are as follows; 1) As a result of analyzing measurements, it was found that pet dogs motion in walking on four feet, is different from that of people on two feet. For center measurements, their waist to bust length is longer than their waist to back length. The result of analysis shows that bust circumference impacts most other measurement results and it seems that better results are achieved if the bust line is taken into consideration when measuring bust back length, bust front length, neck base circumference, front leg arc, the length between lateral shoulder etc. 2) As a result of comparing suppliers' patterns, it was discovered that each supplier has different sizes for the same patterns and those sizes are not standardized across the board. Even if the same size of pattern was actually used in the production of pet dogs' wear by the individual companies, there were many variations in size for each item. 3) To develop a more standard pattern of pet dogs' wear, I collected and analyzed 3 patterns from each supplier and designed a new pattern, revising it three times. After test-wearing of the experimental pattern and the studied patterns, and comparing and analyzing the results, the studied pattern had similarly better estimation than the experimental one.

• 대한물리의학회지
• /
• 제18권1호
• /
• pp.99-110
• /
• 2023

PURPOSE: This study was conducted to suggest a way to easily understand and utilize the International Classification of Functioning, Disability and Health (ICF) or Korean Standard Classification of Functioning, Disability and Health (KCF), a common and standard language related to health information. METHODS: The tools used by physical therapists to evaluate the functioning of neurological patients were collected from 10 domestic hospitals. By applying the ICF linking rule, two experts compared, analyzed, and linked the concepts in the items of the collected tools and the ICF/KCF codes. The frequency of use of the selected tool, the matching rate of the liking results of two experts, and the number of the codes linked were treated as descriptive statistics and the code set was presented as a list. RESULTS: The berg balance scale, trunk impairment scale, timed up and go test, functional ambulation category, 6 Minute walk test, manual muscle test, and range of motion measurements were the most commonly used tools for evaluating the functioning. The total number of items of the seven tools was 33, and the codes linked to the ICF/KCF were 69. Twenty-two codes were mapped, excluding duplicate codes. Ten codes in the body function, 11 codes in the activity, and one code in the environmental factor were included. CONCLUSION: The information on the development process of the code set will increase the understanding of ICF/KCF and the developed code set can conveniently be used for collecting patients' functioning information.

• Wind and Structures
• /
• 제23권5호
• /
• pp.465-483
• /
• 2016

This study aims to enhance the understanding of the surface pressure distribution around rectangular bodies, by considering aspects such as the suction pressure at the leading edge on the top and side faces when the body aspect ratio and wind direction are changed. We carried out wind tunnel measurements and numerical simulations of flow around a series of rectangular bodies (a cube and two rectangular bodies) that were placed in a deep turbulent boundary layer. Based on a modern numerical platform, the Navier-Stokes equations with the typical two-equation model (i.e., the standard $k-{\varepsilon}$ model) were solved, and the results were compared with the wind tunnel measurement data. Regarding the turbulence model, the results of the $k-{\varepsilon}$ model are in overall agreement with the experimental results, including the existing data. However, because of the blockage effects in the computational domain, the pressure recovery region is underpredicted compared to the experimental data. In addition, the $k-{\varepsilon}$ model sometimes will fail to capture the exact flow features. The primary emphasis in this study is on the flow characteristics around rectangular bodies with various aspect ratios and approaching wind directions. The aspect ratio and wind direction influence the type of wake that is generated and ultimately the structural loading and pressure, and in particular, the structural excitation. The results show that the surface pressure variation is highly dependent upon the approaching wind direction, especially on the top and side faces of the cube. In addition, the transverse width has a substantial effect on the variations in surface pressure around the bodies, while the longitudinal length has less influence compared to the transverse width.

• 한국해양공학회지
• /
• 제33권5호
• /
• pp.470-478
• /
• 2019

Because the global positioning system (GPS) is not available in underwater environments, an inertial navigation system (INS)/doppler velocity log (DVL) integrated navigation system is generally implemented. In general, an INS/DVL integrated system adopts a loosely coupled method. However, in this loosely coupled method, although the measurement equation for the filter design is simple, the velocity of the body frame cannot be accurately measured if even one of the DVL transducer signals is not received. In contrast, even if only one or two velocities are measured by the DVL transducers, the tightly coupled method can utilize them as measurements and suppress the error increase of the INS. In this paper, a filter was designed to regenerate the measurements of failed transducers by taking advantage of the tightly coupled method. The regenerated measurements were the normal DVL transducer measurements and the estimated velocity in RPM. In order to effectively estimate the velocity in RPM, a filter was designed considering the effects of the tide. The proposed filter does not switch all of the measurements to RPM if the DVL transducer fails, but only switches information from the failed transducer. In this case, the filter has the advantage of being able to be used as a measurement while continuously estimating the RPM error state. A Monte Carlo simulation was used to determine the performance of the proposed filters, and the scope of the analysis was shown by the standard deviation ($1{\sigma}$, 68%). Finally, the performance of the proposed filter was verified by comparison with the conventional tightly coupled method.