• 한국초전도학회:학술대회논문집
• /
• v.13
• /
• pp.72-72
• /
• 2003

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.651-654
• /
• 2006

The inline manufacturing equipment using a combination of the belt source and LPS source which is innovatively designed is introduced for the largesize AMOLED. The features of the inline system include 60sec TACT time, 19 numbers of chambers, non-substrate bending and easy application to very thin TFT substrates for the $4^{th}$ - $8^{th}$ Generation AMOLEDs.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.116-120
• /
• 2001

Fiber fracture is one of the dominant failure phenomena to determine total mechanical properties in composites. Fiber fracture locations were measured by optical microscopic method and acoustic emission (AE) as functions of matrix toughness and surface treatment by the electrodeposition (ED), and then two methods were compared. Two AE sensors were attached on the epoxy specimen and fiber fracture signals were detected with elapsed time. The interfacial shear stress (IFSS) was measured using tensile fragmentation test and AE system. In ED-treated case, the number of the fiber fracture measured by an optical method and AE was more than that of the untreated case. The signal number measured by AE were rather smaller than the number of fragments measured by optical method, since some fiber fracture signals were lost while AE detection. However, one-to-one correspondence between the x-position location by AE and real break positions by optical method was generally established well. The fiber break source location using AE can be a valuable method to measure IFSS for semi- or nontransparent matrix composites nondestructively (NDT).

• Economic and Environmental Geology
• /
• v.30 no.2
• /
• pp.153-161
• /
• 1997

Diagrams of $^{87}Sr/^{86}Sr$ versus Ba/Nb and MgO/FeO are scattered, and $^{87}Sr/^{86}Sr$ variation with the increase of $SiO_2$ are scattered in Gwangju granitoid. Diagrams of $(^{87}Sr/^{86}Sr)$i versus $(^{143}Nd/^{144}Nd)$i and ${\varepsilon}Nd$ versus 1/Nd variation are also scattered in Gwangju granitoid. It shows that the source magma of Gwangju granitoid are derived from partial melting materials of heterogeneous upper crust. Very low ${\varepsilon}Nd$ values (-15.19~-19.49) and very high ${\varepsilon}Sr$ values (92.72~308.85) mean that the source magma of Gwangju granitoid is derived from sedimentary substance melting. According to $(^{87}Sr/^{86}Sr)$ 180Ma, and the plot of ${\varepsilon}Sr$ versus ${\varepsilon}Nd$, the Gwangju granitoid shows that the source magma is derived from upper crust materials. Nd model ages of Gwangju granitoid (1.82~2.42G.A.) are older than meta-sediments of Okcheon formation (1.15~1.60G.A.) and similar or close to Pre-Cambrian gneiss complex of Ryoungnam massif (2.17~2.47G.A.or 2.11~2.38G.A.).Therefore, the source magma of the Gwangju granitoid could be derived from the partial melting of Pre-Cambrian gneiss complex of Ryoungnam massif.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.1
• /
• pp.100-107
• /
• 2008

The objective of this study was to quantitatively estimate PM-10 source contribution in Gumi City, Korea. Ambient PM-10 samples were collected by a high volume air sampler, which operated for 84 different days with a 24-h sampling basis, from June 14,2001 though May 19, 2003. The filter samples were analyzed for determining 13 inorganic elements, 3 anions, and a total carbon. The study has intensively applied a receptor model, the PMF (Positive Matrix Factorization) model. The results from PMF modeling indicated that a total of seven sources were independently identified and each source was contributed to the ambient Gumi City from secondary sulfate (34%), motor vehicle (26%), soil relation (5%), field burning (3%), industrial relation (3%), secondary nitrate (22%), and incinration (7%) in terms of PM-10 mass, respectively.

• 한국초전도학회:학술대회논문집
• /
• v.16
• /
• pp.65-65
• /
• 2006

• 한국초전도학회:학술대회논문집
• /
• v.11
• /
• pp.68-68
• /
• 2001

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.1
• /
• pp.64-72
• /
• 2009

In order to convert efficiently vibration energy of a car tire wheel into electrical power by using piezoelectric materials, the design of the materials must be performed for the dynamic characteristics of the piezoelectric materials to be matched with them of the vibration energy sources well. An accelerometer was installed on the tire wheel with a slip ring to investigate the dynamic mode of the wheel as one of the vibration energy sources. During road test, the measurement on the vibration mode of the tire wheel was performed with variations of car speed and road condition. The experimental data were analyzed details for availability as a micro power source for wireless TPMS(Tire Pressure Monitoring System).

• Journal of KSNVE
• /
• v.11 no.2
• /
• pp.221-225
• /
• 2001

In order to make a quiet zone, one can consider various methods. Of the methods, this paper deals with the method using control materials such as absorption materials. This method controls sound fields by changing boundary conditions. First, this paper shows that the control material is essentially on the same road as active noise control (ANC) That is, we can consider the control material as the control source of ANC. However we cannot control the source strength. Second, this paper shows that the position of the control material is an important variable by a numerical simulation. And the strategy to optimize the position is addressed.

• Journal of the Semiconductor & Display Technology
• /
• v.4 no.3 s.12
• /
• pp.1-4
• /
• 2005

Silicon oxynitride films were deposited using ammonia as a nitrogen source via PECVD (plasma enhanced chemical vapor deposition) to study the physical properties of the films. Silane and nitrous oxide were used as silicon and oxygen sources, respectively. The composition of the silicon oxynitride films was well controlled by changing the ratios of the sources and confirmed by XPS. The silicon oxynitride films with high oxygen content showed bigger compressive stress and less refractive index, while the values of surface roughness were around 1 nm, irrespective of the variation of the source ratios.