• Archives of Plastic Surgery
• /
• v.37 no.1
• /
• pp.52-58
• /
• 2010

Purpose: The digital artery perforator flap was recently introduced and has been proven to be useful for reconstruction of various finger defects. Short operative time, less invasive surgery, and reliable flap circulation are the major advantages of this flap. The authors presented the clinical cases of the digital artery perforator flap and compared them with the distant flaps within a hand (thenar and hypothenar flaps) to reveal their differences. Methods: From May of 2006 to February of 2009, the authors performed reconstructions of finger defects with the digital artery perforator flaps in 10 patients as with the distant flaps within hand in 9 patients (7 thenar and 2 hypothenar flaps). In these two groups of the patients, flap size, use of skin graft, length of stay in hospital, healing time, complications were reviewed retrospectively and compared with statistical analysis (Student's t-test). Results: All flaps survived completely. The mean size of the perforator flap was $0.9{\times}1.9\;cm$ and the mean distant flap within a hand was $1.9{\times}2.0\;cm$. The use of skin graft was reduced in the perforator group because the donor site of the flap was closed primarily. The hospitalization period and healing time also reduced significantly in the perforator group. Minor complications (partial flap loss) were noted in small percentages in both groups but resolved with conservative management. Mean follow-up period was about 6 weeks. Conclusion: The digital artery perforator flap was smaller than the distant flap but its reconstruction of finger defects was reliable and comparable to the conventional distant flaps within a hand. This flap would be not only an alternative method but very useful in the management of various finger defects, because of ease of operative technique, less invasive surgery, decreased need of skin graft, and shorter period of hospitalization and healing time.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12
• /
• pp.1097-1102
• /
• 2003

In this paper, we used only PR as etching mask, while it used usually Cr/AU as etching mask, and in order to fabricate a photosensor has the increased sensitivity, we investigated on the sensitivity of general type and p-i-n type diode. we designed microchannel size width max 10um, min 5um depth max 10um, reservoir size max 100um, min 2mm. Fabrication of microfluidic devices in glass substrate by glass wet etching methods and glass to glass fusion bonding. The p-i-n diode has higher sensitivity than photodiode, Considering these results, we fabricated p-i-n diodes on the high resistive(4㏀$.$cm) wafer into rectangle and finger pattern and compared internal resistance of each pattern. The internal resistance of pin diode can be decreased by the application of finger pattern has parallel resistance structure from 571Ω to 393Ω.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.443-451
• /
• 2021

Finger millet (Eleusine coracana) is widely cultivated in tropical regions worldwide owing to its high nutritional value. Finger millet is more tolerant against biotic and abiotic stresses such as pests, drought, and salt than other millet crops; therefore, it was proposed as a candidate crop to adapt to climate change in Korea. In 2019, we used expressed sequence tag simple sequence repeat (EST-SSR) markers to evaluate the genetic diversity and structure of 102 finger millet accessions from two geographical regions (Africa and South Asia) to identify appropriate accessions and enhance crop diversity in Korea. In total, 40 primers produced 116 alleles, ranging in size from 135 to 457 bp, with a mean polymorphism information content (PIC) of 0.18225. Polymorphism was detected among the 40 primers, and 13 primers were found to have PIC values > 0.3. Principal coordinate and phylogenetic analyses, based on the combined data of both markers, grouped the finger millet accessions according to their respective collection areas.Therefore, the 102 accessions were classified into two groups, one from Asia and the other from Africa. We have conducted an in-depth study on the finger millet landrace pedigree. By sorting out and using the molecular characteristics of each pedigree, it will be useful for the management and accession identification of the plant resource. The novel SSR markers developed in this study will aid in future genetic analyses of E. coracana.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.7
• /
• pp.962-967
• /
• 2014

In this paper, through a digital potentiometer and exponentially weighted moving average filter, pulse and PPG waveform measurable device was fabricated in radial artery. If this device is not proper about signal size in analog part, MCU can judge easily by adjusted amplification through digital potentiometer, using exponentially weighted moving average filter is able to filter out more clear value of ADC. I presumed pulse rate as value of measuring time between point of maximum contraction from sensing signal in radial artery of wrist. Therefore, this means can measure stable pulse rate and PPG waveform, finger as well as radial artery, whether signal size of each person is different finger as well as radial artery.

• Journal of KIISE
• /
• v.43 no.11
• /
• pp.1307-1314
• /
• 2016

Virtual Hangul keyboards like Chun-Ji-In, Narat-Gul, and QWERTY are based on eyesight recognition, in which input letter positions are fixed in the smartphone environment. The input method of a fixed-position style is not very convenient for visually impaired individuals. In order to resolve the issue of inconvenience of the Hangul input system, we propose a new paradigm of the finger-touch based Hangul input system that does not need eyesight recognition of input buttons. For the convenience of learning the touch-motion based keyboard, finger touches are designed by considering the shape and frequencies of Hangul vowels and consonants together with the preference of fingers. The base position is decided by the first touch of the screen, and the finger-touch keyboard is used in the same way for all the other touch-style devices, regardless of the differences in size and operation system. In this input method, unique finger-touch motions are assigned for Hangul letters that significantly reduce the input errors.

• Archives of Plastic Surgery
• /
• v.39 no.6
• /
• pp.637-642
• /
• 2012

Background Fingertip injuries involving subtotal or total loss of the digital pulp are common types of hand injuries and require reconstruction that is able to provide stable padding and sensory recovery. There are various techniques used for reconstruction of fingertip injuries, but the most effective method is functionally and aesthetically controversial. Despite some disadvantages, cross-finger pulp flap is a relatively simple procedure without significant complications or requiring special techniques. Methods This study included 90 patients with fingertip defects who underwent cross-finger pulp flap between September 1998 and March 2010. In 69 cases, neurorrhaphy was performed between the pulp branch from the proper digital nerve and the recipient's sensory nerve for good sensibility of the injured fingertip. In order to evaluate the outcome of our surgical method, we observed two-point discrimination in the early (3 months) and late (12 to 40 months) postoperative periods. Results Most of the cases had cosmetically and functionally acceptable outcomes. The average defect size was $1.7{\times}1.5$ cm. Sensory return began 3 months after flap application. The two-point discrimination was measured at 4.6 mm (range, 3 to 6 mm) in our method and 7.2 mm (range, 4 to 9 mm) in non-innervated cross-finger pulp flaps. Conclusions The innervated cross-finger pulp flap is a safe and reliable procedure for lateral oblique, volar oblique, and transverse fingertip amputations. Our procedure is simple to perform under local anesthesia, and is able to provide both mechanical stability and sensory recovery. We recommend this method for reconstruction of fingertip injuries.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.517-523
• /
• 2012

Biometrics is a study of identifying individual by using the features of human body. It has been studied for an alternative or complementary method for the classical method based on password, ID card, etc. In comparison with the fingerprint, iris, ear, palmprint, finger-knuckle print has been recently studied. This paper proposes an effective method for recognizing finger-knuckle print based on the feature of Gradient orientation. The main features of finger-knuckle print are the size and direction of winkles. In order to extract these features stably, we make a feature vector consisted of Gradient orientations after the preprocessing of enhancing non-uniform brightness and low contrast. Total 790 images acquired from 158 persons have been used at the experiment for evaluating the performance of the proposed method. The experimental results show the recognition rate of 99.69% and the relatively high decidability index of 1.882. These results demonstrate that the proposed method is effective in recognizing finger-knuckle print.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.46-46
• /
• 2020

Finger millet is more nutritious than other and millets and widely cultivate in tropical regions of the world. Furthermore, it is more tolerant against biotic and abiotic stresses such as pest, drought and salt. For this reason, finger millet is one of the putative crops to introduce and cultivate on reclaimed land and prepare the global climate exchange in Korea. In present study, genetic diversity and structure of different populations of finger millet from Africa and South Asia was examined at molecular level using newly developed EST-Simple Sequence Repeat (EST-SSR) markers. In total, 46 primers produced 292 alleles in a size range of 100-500 bp and mean Polymorphism Information Content (PIC) and Marker Index (MI) were 0.372 and 1.04, respectively. 46 primers showed polymorphism and 21 primers were identified as having a PIC value above 0.5. Principal coordinates analysis and the dendrogram constructed out of combined data of both markers showed grouping of finger millet accessions to their respective area of collection. The 156 accessions were more classified into four groups, such as three groups of Africa collection and one group of Asia. Results of present study can be useful in identifying diverse accessions and management of this plant resource. Moreover, the novel SSR markers developed can be utilized for various genetic analyses in this species in future.

• Archives of Reconstructive Microsurgery
• /
• v.18 no.1
• /
• pp.35-39
• /
• 2009

Purpose: Various techniques have been attempted for design of the flaps. However, there are some disadvantages. They have thin, pliable, and two dimensional methods. The aim of this study is to report usefulness of polyurethane foam dressing materials for three dimensional design of the digital island flap. Methods: From June of 2007 to september of 2008, 10 patients received digital island flap surgery for soft tissue defect of the finger. After minimal debridement of the wound, size and shape of the defect were measured using polyurethane foam. We used Medifoam-$5^{(R)}$ And then, designed this inset the wound. The flap was designed on the donor site with a arterial pedicle as the central axis according to size and shape. A full thickness skin graft from the groin is applied on the flap donor defect and secured with a tieover bolster dressing. Results: Reviewing sizes of the flaps, the length and width of flaps ranged from 1.5 to 3.3 cm and 1.0 to 2.5 cm. The PACS(Picture Archiving Communication System) program allows identification of the donor depth of finger. The distance for the soft tissue ranged from 4.3 mm to 6.7 mm. Mean depth of donor site was 5.3${\pm}$0.6 mm. Also, the thickness of Medifoam-$5^{(R)}$ ranged nearly 5 mm. On flap insetting, full-thickness skin graft was necessary. We did not experience any problems in the recipient site size either, regardless of the extended flaps. Conclusion: Polyurethane foam has many advantages over the more conventional templates. Refinements in flap design and surgical technique resulted in favorable functional and cosmetic results. Especially, for beginner, Polyurethane foam dressing material is a simple and safe tool and therefore is an excellent choice for design of the island flap.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.605-610
• /
• 2010

In order to design a touch interface for the elderly, human performance of input tasks on the touch screen was investigated by the laboratory experiment. Input times and input errors were measured in the experimental conditions that were changed according to age, key size, interkey space and input tool(finger or stylus pen). In the most of all experimental conditions, the task performance of the elderly was lower than that of the young. However, there were significantly different performance patterns between both groups. As the difficulty of task was getting higher, the task performance of the elderly was sharply decreased; pressing small key button by finger sharply increased input time and error rate, compared to that of the young. Therefore, the square key size suitable to the elderly may be over $8.0{\times}8.0mm$. While the interkey space did not influence to the input task performance of the young, the task performance of the elderly was influenced. The elderly showed big difference of task performance according to input tool. However, the young were less influenced by input tool.