• Journal of Korea Multimedia Society
• /
• v.22 no.6
• /
• pp.676-683
• /
• 2019

Wireless Sensor Networks (WSNs) consist of multiple tiny and power constrained sensors which use radio frequencies to carry out sensing in a designated sensor area. To effectively design and implement reliable WSN, it is critical to consider models, protocols, and algorithms that can optimize energy consumption of all the sensor nodes with optimal amount of packet delivery. It has been observed that deploying a single sink node comes with numerous challenges especially in a situation with high node density and congestion. Sensor nodes close to a single sink node receive more transmission traffic load compared to other sensors, thus causing quick depletion of energy which finally leads to an energy hole and sink hole problems. In this paper, we proposed the use of multiple energy efficient sink nodes with brute force technique under optimized parameters to improve on the number of packets delivered within a given time. Simulation results not only depict that, deploying N sink nodes in a sensor area has a maximum limit to offer a justifiable improvement in terms of packet delivery ratio but also offers a reduction in End to End delay and reliability in case of failure of a single sink node, and an improvement in the network lifetime rather than deploying a single static sink node.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.2
• /
• pp.326-340
• /
• 2017

This study explores the daily life of Korean designers in New York. We use in-depth interviews within the daily lives of participants to first reveal the time structure and meaning of everyday life. In this everyday time frame, this study reveals the content and meaning of life in New York, which is especially useful for fashion majors. Participants were 11 single Korean women around 30 years old working as designers in New York. Data was collected from Manhattan, New York, from November 2013 to February 2014 through the use of in-depth interviews and participant observation. Data collected daily life information on time usage, money, and energy that is first summarized into 229 meaning units. In the following, 55 central meanings were derived from stories common to behaviors for study participants and 19 subcategories were compressed into academic language. Finally, the generalized categories are divided into six categories of study life, work life, future life, family life, leisure life and fashion life. As a result of the first study, the daily time structure consisted of customary public time and personal repeat time. Second, the customary public time categories included the studying for 'Beginning to jump again to the best', 'Now working as a designer in New York', and future life expecting 'Future growing as a career woman'. Repeated personal time categories include family life: 'A single life of a lonely and poor gentile', leisure life: 'Healing life that is supported by abundant advanced culture', and fashion life: 'New York fashion life coexist with harmony'. Third, work was the center of everyday life for study participants versus fashion and leisure that were central to everyday life when not working.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.1149-1152
• /
• 1999

In this paper we analyzed each region of specific points and ｅ-Δｅphase plane in order to make fuzzy rule base. After we composed the fuzzy control rules which can decrease rise time, delay time, maximum overshoot than basic fuzzy control rules. The composed method are converged more rapidly than single rule base in convergence region. Proposed method is alternately use at specific points of ｅ-Δｅphase plane with two fuzzy control rules, that is one control rule occruing the steady state error used in transient region and another fuzzy control rule use to decrease the steady state error and rapidly converge at the convergence region. Two fuzzy control rules in the ｅ-Δｅ phase plane decide the change time according to response characteristics of plants. As the results of simulation through the second order plant and the delay time plan, Proposed dual fuzzy control rules get the good response compare with the basic fuzzy control rule.

• Archives of Reconstructive Microsurgery
• /
• v.24 no.1
• /
• pp.1-6
• /
• 2015

Purpose: The main cause of flap loss in microsurgical tissue transfer is venous insufficiency. Whether or not multiple venous anastomoses prevents vascular thrombosis and reduces the risk of flap failure remains controversial. Some researchers are in favor of performing dual venous anastomoses, but the counterargument holds that performing a single venous anastomosis does provide advantages. Materials and Methods: We carried out a retrospective analysis of 15 cases of anterolateral thigh free flap for extremity reconstruction performed between January 2011 and December 2013. The patients were categorized into two groups: group A that received a single venous anastomosis and group B that received dual venous anastomoses. The time of the anastomosis, size of the flap, complications of the flap, and survival rate of each group were analyzed. Results: The total microsurgical time in the single venous anastomosis group ranged from 28 to 43 minutes (mean 35.9 minutes). The total time in the dual anastomoses group ranged from 50 to 64 minutes (mean 55.7 minutes). No statistically significant difference was found between the two groups with regards to postoperative complications and flap failure. Conclusion: Our study suggests that the use of a single venous anastomosis in the venous drainage of anterolateral thigh free flaps is a safe and feasible option for extremity reconstruction and provides shorter operative time and easy flap dissection.

• The Journal of the Korea Contents Association
• /
• v.21 no.7
• /
• pp.601-608
• /
• 2021

This study was conducted using data from the 2019 National Statistical Office's Life Time Survey, It was to investigate the effect of time-perception on the time-use pattern of 594 single middle-aged women in the city. This study found that there were differences of time management for daily behaviors between the insufficiently-percieved group and the sufficiently-percieved group. The both spent the most time with personal management. Secondly, the sufficiently-perceived group spent the more time with leisure activities than the insufficiently one did; the insufficiently-perceived one did the more work than the sufficiently-perceived one. The founding suggested the difference of time-use pattern by time-perception of the middle-aged women in the city. Also, the leisure activities and work were key factors to understand the daily life of the city-living middle-aged women.

• Smart Structures and Systems
• /
• v.6 no.3
• /
• pp.197-209
• /
• 2010

The structural state of a bridge is currently examined by visual inspection or by wired sensor techniques, which are relatively expensive, vulnerable to inclement conditions, and time consuming to undertake. In contrast, wireless sensor networks are easy to deploy and flexible in application so that the network can adjust to the individual structure. Different sensing techniques have been used with such networks, but the acoustic emission technique has rarely been utilized. With the use of acoustic emission (AE) techniques it is possible to detect internal structural damage, from cracks propagating during the routine use of a structure, e.g. breakage of prestressing wires. To date, AE data analysis techniques are not appropriate for the requirements of a wireless network due to the very exact time synchronization needed between multiple sensors, and power consumption issues. To unleash the power of the acoustic emission technique on large, extended structures, recording and local analysis techniques need better algorithms to handle and reduce the immense amount of data generated. Preliminary results from utilizing a new concept called Acoustic Emission Array Processing to locally reduce data to information are presented. Results show that the azimuthal location of a seismic source can be successfully identified, using an array of six to eight poor-quality AE sensors arranged in a circular array approximately 200 mm in diameter. AE beamforming only requires very fine time synchronization of the sensors within a single array, relative timing between sensors of $1{\mu}s$ can easily be performed by a single Mote servicing the array. The method concentrates the essence of six to eight extended waveforms into a single value to be sent through the wireless network, resulting in power savings by avoiding extended radio transmission.

• International Journal of Computer Science & Network Security
• /
• v.21 no.2
• /
• pp.221-228
• /
• 2021

Recent improvements on the quality, fidelity and availability of biometric data have led to effective human physical activity detection (HPAD) in real time which adds significant value to applications such as human behavior identification, healthcare monitoring, and user authentication. Current approaches usually use machine-learning techniques for human physical activity recognition based on the data collected from wearable accelerometer sensor from a single wearable smart device on the user. However, collecting data from a single wearable smart device may not provide the complete user activity data as it is usually attached to only single part of the user's body. In addition, in case of the absence of the single sensor, then no data can be collected. Hence, in this paper, a continuous HPAD will be presented to effectively perform user activity detection with mobile service infrastructure using multiple wearable smart devices, namely smartphone and smartwatch placed in various locations on user's body for more accurate HPAD. A case study on a comprehensive dataset of classified human physical activities with our HAPD approach shows substantial improvement in HPAD accuracy.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.5
• /
• pp.437-446
• /
• 2017

Objective: This study aims to draw an efficient UI design by comparing the usability of App drawer and single-layered home screens, which are smartphone home screens. Background: Because smartphone home screen is frequently used including the installation, deletion, and editing of APPs, it should be designed with easily controllable information structure. There is a need to seek a user-friendly UI by comparing the usability of App drawer and single-layered home screens, of which methods to search Apps are different. There is also a need to examine an efficient UI and the factors to improve from the user perspective. Method: This study targeted 30 Android OS and iOS users to evaluate the App drawer and single-layered home screens, of which UI structures are different. Each participant was instructed to carry out an App searching task and App deleting task, and the execution time and the number of errors were measured. After the tasks were completed, they evaluated satisfaction through a questionnaire survey. Results: In the App searching task with low task level, there was no difference in execution level between the App drawer and single-layered home screens. However, the single-layered home screen showed higher efficiency and accuracy in the App deleting task with high task level. As for the group difference according to use experience, there was no difference in satisfaction among Android OS users, but iOS user satisfaction with single-layered home screen with which they were familiar was higher. Conclusion: As for home screen usability, the single-layered home screen UI structure can be advantageous, as task level is higher. Repulsion was higher, when users, who had used easier UI, used complex UI in comparison with user satisfaction, when users familiar with complex UI used easier UI. A UI indicating the current status with clear label marking through a task flow chart-based analysis, and a UI in which a user can immediately recognize by exposing hidden functions to the first depth were revealed as things to improve. Application: The results of this study are expected to be used as reference data in designing smartphone home screens. Especially, when iOS users use Android OS, the results are presumed to contribute to the reduction of predicted barriers.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.11B no.2
• /
• pp.9-14
• /
• 2001

Because salient pole rotor type single phase SRM(Switched Reluctance Motor) has a simple structure and can be use both radial and axial direction magnetic flux at the same time, its output power per unit volume is high. Therefore, the shaft length can be minimized when compared with same output motors. However, salient pole rotor is hard to design due to its complex magnetic circuit. In this paper, salient pole rotor type single phase SRM with minimized shaft length is designed and selected the most suitable dimension of rotor, stator, pole arc and salient pole.

• Microbiology and Biotechnology Letters
• /
• v.17 no.3
• /
• pp.269-272
• /
• 1989

In order to obtain monoclonal antibody from ascites fluid at sufficiently high purity using a single hydroxylapatite chromatography (HA) a further optimization on its operating variables was carried out. By adjusting the pH of the eluent, the sodium phosphate buffer, to 6.0 from 6.8 and adding CaCl$_2$to 1 mM at the column inlet, the elution molarities (M$_{elu}$) for the desired monoclonal antibody and contaminating proteins can be distinguished from each other with enough resolution. Previously these two groups of proteins co-eluted at the same time at pH 6.8 and without CaCl$_2$. This sin81e step hydroxylapatite chromatography yields the desired antibody pure enough for diagnostic use.