• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.7
• /
• pp.689-694
• /
• 2008

This paper proposes a roll rate estimation method for spinning vehicles. The carrier phase and frequency variations caused by spinning of vehicles are observed and the roll rate estimator is designed on the observation. The roll rate estimator consists of phase detector and zero crossing counter. The phase detector computes phase variation using in-phase and quadrature value from the correlator. By using zero crossing counter, the roll rate can be estimated since the output of phase detector is changed in proportion to the roll rate. Experiment a results show that estimated roll rate error is smaller than 0.0578Hz.

• Macromolecular Research
• /
• v.17 no.1
• /
• pp.14-18
• /
• 2009

The acceleration effect of various organic acids, such as methanesulfonic acid (MSA), ethanesulfonic acid (ESA), 4,4'-sulfonyldibenzoic acid (SDA), diphenylacetic acid (DPAA), and $\rho$-toluenesulfonic acid (TSA), on the rate of styrene bulk polymerization with 2,2,6,6-tetramethylpiperidinyloxy (TEMPO) and benzoyl peroxide (BPO) was investigated. The addition of organic acids significantly accelerated the rate. Among these organic acids, DPAA showed an efficient rate-accelerating effect with living nature of polymerization. When DPAA was used as a rate-accelerating additive for TEMPO-mediated living free radical polymerization (LFRP), the rate of polymerization was dramatically enhanced, the linearity of reaction kinetics was successfully maintained, and the polydispersity was effectively controlled.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.43
• /
• pp.175-195
• /
• 1997

The learning curve has an important effect the growth of corporation. But, in Korea, the study and inference on the learning rate of each industry are unprepared, and so, Korean industires have difficult in productivity and cost. At this point, this study infers the learning rate of the oil industries and investigates the productivity and growth of them. In conclusion, this study presents the direction of the oil industries' development. With the intention of this objects, this study seizes the status which is concerned the total quantity, the operating rate, the plant capacity, the indicators concerning productivity, the investment of R & D and the scales, and then, infers and verifies the relevancy in connection with the learning rate. In the oil industry, the average rate of learning is 65.96% from 1982 to 1994 which the total quantity and the average operation time are used to infer the rate. To observe the low rate within a same period of time, this study takes the consequences that the learning rate is almost indentical with them each year. This steady state is caused by a difference between the employee and the decision maker about the acquirement and assimiliated of technology. When the high-quality technologies posses the environment to applicate in the scene of labor with them, this technology applies to the productivities. As the learning rate increases, the productivity has more effectiveness. The result of analysis about the effectiveness of the learning rate follows that the R & D unfoldes to exist and does not contribute to the growth of the oil industry. To analyze the variables of the growth, such as the learning rate, the investement of R & D, the operating rate and the gross value added to property, plant and equipment, the model is established and examined. The business strategy in the oil industry must be developed to achive the internal growth as well as the external.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.6
• /
• pp.1147-1165
• /
• 2011

We present a simple and cost effective rate control scheme for streaming video over a wireless channel by using the information of mobile devices' buffer level. To prevent buffer fullness and emptiness at receivers, the server should be able to adjust sending rate according to receivers' buffer status. We propose methods to adjust sending rate based on the buffer level and discrete derivative of the buffer occupancy. To be compatible with existing network protocols, we provide methods to adjust sending rate by changing the inter-packet delay (IPD) at the server side. At every round-trip time, adjustments of sending rate are made in order to achieve responsiveness to sudden changes of buffer availabilities. A series of simulations and the prototype system showed that the proposed methods did not cause buffer overflows and it can maintain smoother rate control and react to bandwidth changes promptly.

• The Journal of the Korean life insurance medical association
• /
• v.1 no.1
• /
• pp.133-139
• /
• 1984

In the 2,218 healthy cases-male 1,574 female 644-who were conducted serum examination from May 1st 1983 to November 1st 1983 by the medical selection of Dae Han Kyouk life insurance Co., the results which investigated the HBsAg by using the Reverse Passive Hemagglutination(RPHA) method are as follows; 1. The number of 167 from 2,218 cases proved to be positive, showing 7.52%, the number of 143 from 1,574 male positive, showing 9.08%, and the number 24 from 644 female positive, showing 3.73%. The positive rate of the male was indicated by 5.36% higher than that of the female as the former marked 2.4 times higher distribution than the latter. 2) The positive rate by the type of occupations appears as follows; The highest positive rate group is that of discharger from military service in 1983, the number of 70 from 736 persons marking 9.51% and the next is the merchant 8.79%(8/91), employee of a company markes 8.53%(44/516), high school boy 7.69%(19/247), house wife 5.71%(10/210), carrier woman 3.45%(10/290) and the group of the high school girl records the minimum rate of all, 3.13%(4/128). 3. The positive rate by the age group appears as follows; The highest rate group is that of 31 to 35 years, marking 9.80% positive rate, and the next is $26{\sim}30$(9.3%), $21{\sim}25$(8.01%), $41{\sim}45$(6.96%), $36{\sim}40$(6.9%), those below 20(5.99%), 46 to 50 years shows the minimum rate of all(2.94%) Among the male case, 26 to 30 years shows the highest positive rate by 10.59% and female, 31 to 35 years shows the highest rate by 7.89%. 4. The positive rate by the blood type represents as follows; Blood type A shows 7.30%, type B 7.17%, type O 6.11% and type AB indicates 5.88% in order.

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.91-96
• /
• 2001

Diminishing fare rate to distance is widely applied in transportation field including bus, but the decision method of diminishing rate is not established. The basic concept of diminishing fare rate to distance is that passengers have a benefit according to their travel distance. Furthermore, this can be justified in the standpoint of operator because the cost of long-distance traveller is lower than that of short-distance traveller to make same income. It is essential to introduce diminishing fare rate to distance to decide diminishing rate. We suggested methodologies regarding how to decide diminishing rate on the basis of operator costs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10C
• /
• pp.942-949
• /
• 2007

In this paper, we propose a new rate-control scheme, called splining, to construct low-rate codes from high-rate codes by splitting rows of the parity-check matrices of LDPC codes, which can construct rate-compatible LDPC codes having good initial transmission performance. Good low-rate codes can be constructed by making the number of distinct check node degrees as small as possible after splitting. The proposed scheme achieves good cycle property, low decoding complexity, and fast convergence speed, especially compared to the puncturing. Especially, rate-compatible repeat accumulate-type LDPC (RA-Type LDPC) code is constructed using splitting, which covers the code rates from 1/3 to 4/5. Through simulation it is shown that this code outperforms other rate-compatible RA-Type LDPC codes for all rates and can be decoded conveniently and efficiently.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.04a
• /
• pp.177-183
• /
• 2011

Korea has performed strategies for the third industrial accident prevention in order to minimize industrial accident. However, the occupational fatality rate and industrial accident rate appears to be stagnated for 11 years. Therefore, this paper forecasts the occupational fatality rate and industrial accident rate for 10 years. Also, this paper applies regression method (RA), exponential smoothing method (ESM), double exponential smoothing method (DESM), autoregressive integrated moving average (ARIMA) model and proposed analytical function method (PAFM) for trend of industrial accident. Finally, this paper suggests fundamental strategies for industrial accident prevention by forecasting of industrial accident rate in the long term.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.7
• /
• pp.14-21
• /
• 1998

In providing with low speed multimedia services, a call blocking rate is greatly varied according to the transmission rate, and thereofr, the call blocking rate is remarkably increased for a service having a high transmission rate compared to a service having a low transmission rate. This paper presents three methods of solving this problem; Packing Scheme in which available channels distributed to each frequency channel are concentrated on one frequency channel and a call having a high transmission rate is assigned to the frequency channel; Queuing Scheme in which queuing is assigned to calls under service is temporarily reduced and a call having a high transmission rate is allowed. The result of performance analysis for 13 Kbps and 128 Kbps service through computer simulation showed that the call blocking rate for 128 Kbpx service was reduced by tens of percent accoring to loads.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.127-128
• /
• 1998

It is necessary to maintain constant intravenous (IV) infusion rate. While infusion pump is able to control infusion rate with great accuracy, its rather large size and weight make it difficult for patients to move around. The most commonly used infusion device is gravity IV infusion set with its administration chamber being clamped according to the observed drip rate. In this case it may be easier and more accurate to maintain IV rate to given value if we automate the drip-counting process and tube-clamping work by electronic devices. We calculated volume infusion rate of specific fluid using optical drip rate meter which we had developed. To regulate fluid flow rate, we equipped the rate meter which we had developed with a miniaturized clamping apparatus using DC motor. Also, we Implemented drip detection and clamp control algorithm with PIC16C73 $\mu$-controller (Microchip). This system provides user interface through LCD display and key buttons.