• Journal of Embryo Transfer
• /
• v.19 no.2
• /
• pp.101-112
• /
• 2004

Chloride($Cl^-$) channels play critical roles in cell homeostasis and its specific functions such as volume regulation, differentiation, secretion, and membrane stabilization. The presence of these channels have been reported in all kinds of cells and even in frog oocytes. These essential role of $Cl^-$­ channels in cell homeostasis possibly play any role in egg homeostasis and in the early stage of development, however, there has been no report about the presence of $Cl^-$­ channel in the mammalian oocyte. This study was performed to elucidate the presence of $Cl^-$­ channels in hamster eggs. When allowing only $Cl^-$­ to pass through the channel of the egg membrane by using impermeant cation such as N-methyl-D-glucamine(NMDG), single channel currents were recorded. These channel currents showed typical long-lasted openings interrupted by rapid flickering. Mean open $time({\tau}o)$ was 43${\pm}$10.14 ms(n=9, at 50 mV). The open probability(Po) was decrease with depolarization. The current-voltage relation showed outward rectification. Outward slop conductance(32${\pm}$5.4 pS, n=22) was steeper than the inward slop conductance(10${\pm}$1.3 pS). Under the condition of symmetrical 140 mM NaCl, single channel currents were reversed at 0 mV(n=4). This reversal potential(Erev) was shifted from 0 mV at 140 mM concentration of internal NaCl(140 mM [Na+]i) to ­9.8${\pm}$0.5 mV(n=4) at 70 mM [Na+]i and 11.5${\pm}$1.9 mV at 280 mM [Na+]i(n=4) respectively, strongly suggesting that these are single $Cl^-$­ channel currents. To examine further whether this channel has pharmacological property of the $Cl^-$­ channel, specific Cl­ channel blockers, IAA-94(Indanyloxyacetic acid-94) and DIDS(4, 4'-diisothiocyan ostillben- 2-2'disulfonic acid) were applied. IAA-94 inhibited the channel current in a dose-dependent manner and revealed a rapid and flickering block. From these electrophysiological and pharmacological resluts, we found the novel $Cl^-$­ channel present in the hamster oocyte membrane. The first identification of $Cl^-$­ channel in the hamster oocyte may give a clue for the further study on the function of $Cl^-$­ channel in the fertilization and cell differentiation.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1096-1107
• /
• 2019

This study on the physicochemical property of physiological activity substance in mung bean (Phaseolus aureus L.) was performed for the use as an functional food materialization. The proximate composition in the vacuum freeze dried mung bean was carbohydrate 57.20±0.29%, crude protein 26.40±0.69%, moisture 9.90±0.16%, crude ash 3.54±0.43%, and crude fat 2.96±0.26%, respectively. The vitamin content of mung bean was vitamin B₅ 0.62±0.013 mg/100 g, vitamin E 0.17±0.001 mg/100 g, vitamin B₁ 0.13±0.016 mg/100 g, and β-carotene 87.37±0.754 ㎍ RE/100 g, respectively. The mineral content of mung bean was potassium (K) 12,428.55±147.55 mg kg^-1, magnesium (Mg) 2,053.32±14.13 mg kg^-1, calcium (Ca) 1,966.40±14.53 mg kg^-1, sodium (Na) 1,063.99±7.75 mg kg^-1, iron (Fe) 63.77±0.98 mg kg^-1, and manganese (Mn) 14.67±0.22 mg kg^-1. The compositions of fatty acid were saturated fatty acid 29.23±0.03%, monoenes 20.30±0.04%, and polyenes 50.46±0.06%. Protein bound amino acid content of mung bean was 21.75±0.24 g%. And major amino acids were glutamic acid 3.93±0.03 g%, aspartic acid 2.68±0.03 g%, respectively. The composition of free amino acid of mung bean was 336.77±8.66 mg%, and major free amino acids were arginine, glutamic acid, asparagine, and aspartic acid. As a results of these experiment, Mung bean could be used a natural resouce and functional biohealth food substance.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.5
• /
• pp.1447-1456
• /
• 2015

Olive flounder (Paralichthys olivaceus) including red seabream (Pagrus major) and jacopever (Sebastes schlegeli) were known to be suitable characteristics for preparing a processed food because of white meat fish containing low fat in muscle. In this study, the physicochemical properties of olive flounder (46-50 cm of length, 950-1,050 g of weight), red seabream (30-33 cm of length, 1,250-1,350 g of weight) and jacopever (20-23 cm of length, 550-650 g of weight) were studied to obtain a basic data for the development of a new processed food. Head, scale, bone and viscera of each samples were removed, and then grinding with homogenizer before experiment. Moisture content of red seabream is lower than that of olive flounder and jacopever, therefore, crude protein and crude lipid are higher content. Red seabream showed higher redness, yellowess and color difference value than those of olive flounder and jacopever except lightness. The major total amino acid in olive flounder, seabream and jacopever were glutamic acid, lysine and aspartic acid in order. Especially, the highest content of free amino acid was lysine for olive flounder and jacopever and alanine for red seabream. The highest content of mineral in olive flounder, seabream and jacopever was potassium (K) and then phosphorous (P) and sodium (Na) in order. The highest amount of fatty acid in olive flounder, red seabream and jacopever was polyenoic acid in which especially contained 6.8, 7.1 and 6.7% for EPA, and 15.2, 15.2 and 17.1% for DHA, respectively. From the result of sensory evaluation, there was no significant difference in color and odor, but not in taste and texture.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 1998.10a
• /
• pp.83-106
• /
• 1998

This study was conducted to investigate the probiotics(acid and bile resistance, fermentation properties, viability, cholesterol assimilation, antimicrobial activity, antimutagenicity, and immunoactivation) of the strains of bifidobacteria isolated from healthy Koreans and to investigate the effects of oral administration of Bifidobacterium longum A-2 on the fecal microflora, ${\beta}-glucuronidase$ activity, pH values, Ammonia concentration. The experimental results are summarized as follows: The probiotics were tested for 23 strains including three commer챠al strains as controls. Compared to other strains, strains of A-2 and A-9 showed more acid resistance whereas A-2, A-5, A-13, A-14, A-18 and A-22 showed excellent bile resistances. The properties of bifidobacteria during fermentation were tested. Strains of A-1, A-2, A-3, A-4, A-6, and A-23 resulted in less than pH 4.5 and titratable acidity over 0.90 after 24 hr of fermentation. When the strains of A-2 was grown with glucose, maltose, and fructooligosaccharide, the acetic acid production were higher than with sorbitol and mannitol. The storage stability of the strains of A-2 and A-22 were tesed, indicating the strain A-2 was more stable over 10 days of storage at both $4^{\circ}C$ and $20^{\circ}C$ than A-22. The strains of A-8, A-10, A-11, A-12 and A-20 assimilated more than 30% of cholesterol included in the media. The strains of A-1 and A-2 showed antimicrobial activity against Sta. aureus. The antimutagenicity of the strains were also tested, showing that the mutation was suppressed more by three strains(A-2, A-12, and A-23). In addition, strain A-5 improved immunological activity(phagocytosis, $TNF-{\alpha}$, IL-6) more than other strains. In the effects of oral administration of Bif. longum A-2, the number of fecal bifidobacteria was siginificantly increased(p<0.01) and the level of fecal ${\beta}-glucuronidase$ also was siginificantly reduced(p<0.05). However there were no siginificant differences in the level of Lαctobacilli, Enterobacteriaceae, Clostridium perfringens, pH and ammonia by the administration. The results suggested that Bif. longum A-2 may be met the criteria for probiotics culture.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.4
• /
• pp.329-344
• /
• 2002

Mineralogical and chemical characterization of some domestic bentonites, such as quantitative XRD analysis, chemical leaching experiments, pH and CEC determinations, were done without any separation procedures to understand their relationships among mineral composition, characteristics, and cation exchange properties. XRD quantification results based on Rietveld method reveal that the bentonites contain totally more than 25 wt% of impurities, such as zeolites, opal-CT, and feldspars, in addition to montmorillonite ranging 30～75 wt%. Cation exchange properties of the zeolitic bentonites are deeply affected by the content of zeolites identified as clinoptilolite-heulandite series. Clinoptilolite is common in the silicic bentonites with lighter color. and occurs closely in association with opal-CT. Ca is mostly the dominant exchangeable cation, but some zeolitic bentonites have K as a major exchangeable cation, The values of cation exchange capacity (CEC) determined by Methylene Blue method are comparatively low and have roughly a linear relationship with the montmorillonite content of the bentonite, though the correlated data tend to be rather dispersed. Compared to this, the CEC determined by Ammonium Acetate method, i.e.‘Total CEC’, has much higher values (50～115 meq/100 g). The differences between those CEC values are much greater in zeolitic bentonites, which obviously indicates the CEC increase affected by zeolite. Other impurities such as opal-CT and feldspars seem to affect insignificantly on the CEC of bentonites. When dispersed in distilled water, the pH of bentonites roughly tends to increase up to 9.3 with increasing the alkali abundance, especially Na, in exchangeable cation composition. However, some bentonites exhibit lower pH (5～6) so as to regard as ‘acid clay’. This may be due to the presence of $H^{＋}$ in part as an exchangeable cation in the layer site of montmorillonite. All the works of this study ultimately suggest that an assesment of domestic bentonites in grade and quality should be accomplished through the quantitative XRD analysis and the ‘Total CEC’measurement.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.4
• /
• pp.303-311
• /
• 2007

The consumption of artificially crushed sands exceeds more than 30 percent of the domestic sand supply in South Korea, and its rate is still increasing. For the manufacture of crushed sand granites and granitic gneisses are preferred, fine fractions (i.e. sludge, particles finer than 63 microns) are removed by use of flocculation agents, and its amount occupy about 15 wt%. The sludges consist of quartz, feldspars, micas, chlorite/vermiculite, kaolinites, smectites and occasionally calcite. Among the clay minerals micas are usually predominant, and $14{\AA}$ minerals, kaolinites and smectites are rather scarce. Jurassic granites usually contain more kaolinites and smectites than those of Cretaceous to Tertiary granites, probably due to longer geologic ages. On the other hand, sludge from Precambrian gneiss does not contain kaolinites and smectites. Chemical analyses for the granites and their sludges show rather clear differences in most of major chemical components. Except for $SiO_2,\;Na_2O\;and\;K_2O$, all other components represent rather clear increase. Decrease of $SiO_2$ content is attributed to the relative decrease of quartz in the sludges. And the $Na_2O decrease is caused by a relatively stronger weathering property of albite compared to Ca plagioclase. The $K_2O$ content shows rather small differences throughout the whole samples. The increases of $Al_2O_3$ and other major components resulted from weathering processes and most of colored components are also concentrated in the sludges. Particle size analyses reveal that the sludges are categorized as sandy loams in a sand-silt-clay triangular diagram. The sludge is now classified as industrial waste because of its impermeability, and this result was also confirmed by rather higher hydraulic conductivities. For the environmental problems, and accomplishing effective sand manufacture, more fresh rocks with little weathering products must be chosen.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.3
• /
• pp.159-168
• /
• 2005

This experiment was carried out during the period from May to October 1998 to determine the effect of fermented sawdust swine manure application (SSM) on the herbage production of Japanese millet and soil properties in the Cheju brown volcanic ash soil. The randomized block design (T1 : basic chemical fertilizer, N 200 kg/ha + $P_2O_5\;300 kg/ha+K_2O$ 200kg/ha ; T2 : 1/2 basic chemical fertilizer, N $100+P_2O_5\;150+K_2O$ 100kg/ha; T3 : 1/2 basic SSM, N 100kg/ha, T4:basic SSM, N 200kg/ha; T5:2 times basic SSM, N 400 kg/ha ; T6:4 times basic SSM, N 800 kg/ha) was used. At the same application level of nitrogen 200kg/ha, the application of $100\%$ chemical fertilizer (T1) had significantly lower dry matter yield than that of $50\%$ chemical fertilizer and $50\%$ SSM (T2) or $100\%$ SSM (T4)(p<0.01). Dry matter yield increased with an increase of SSM application to N 400kg/ha level but decreased at N 800 kg/ha level. P, K and Ca contents of Japanese millet tended towards to decrease with an increase of SSM level. The application of chemical fertilizer lowered P and K content of Japanese millet in comparison with that of SSM (p<0.05). pH, available phosphorus. exchangeable potassium, Ca and Mg content of soil studied showed a significant increase with an increase of SSM application level (p<0.05). However, at the same application level of N 200kg/ha, there was statistically no significant difference between chemical fertilizer and SSM in those contents of soil after experiment. The bacterial number of soil among microbial population increased with an increase of SSM level, in June, 1998 (p<0.05), but there was no regular tendency, in October. The rate of bacteria to fungus in soil had a tendency to decrease with an increase of SSM level. In conclusion, it is recommended to use N 400kg/ha of SSM or N 100 kg/ha of chemical fertilizer+N 100 kg/ha of SSM for Japanese millet.

• Korean journal of food and cookery science
• /
• v.18 no.6
• /
• pp.692-697
• /
• 2002

The purpose of this study is to investigate the characteristics of the doughs and noodles cooked with the pea starch-wheat composite flour which was substituted with 20% and 30% of pea starch for the flour by the mechanical and sensory evaluation. Wheat dough had the most cohesive property among various composite non.(p＜0.05) There was no significant differences in weight gain after cooking among various noodles. The more the pea starch was subsituted, the lighter the color was shown by increasing L value. It was also noted that the b value was decreased significantly. While pea starch noodle were more transparent in appearance and less smooth in the texture, corn starch-wheat composite flour noodle was sorter in the texture significantly. There was no significant difference on the hardness between wheat and pea stach composite flour noodles. There were also no significant differences in stickiness, chewiness and overall acceptability among various noodles. Considering mechanical and sensory results, the composite flour with 20% substitution of pea starch for flour was more suitable for the production of the noodle than those of 30% substitution of pea starch.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.1
• /
• pp.19-62
• /
• 1985

This study was performed to investigate: (i) the bending processing properties of silk worm oak (Quercus acutissima Carr.) and Korean red pine (Pinus densiflora S. et Z.) by boiling and steaming treatments; (ii) the effects of interrelated factors - sapwood and heartwood, annual ring placement, softening temperature and time, moisture content. and wood defects on bending processing properties; (iii) the changing rates of bending radii after release from a tension strap, and (iv) the improving methods of bending process by treatment with chemicals. The size of specimens tested was $15{\times}15{\times}350mm$ for boiling and steaming treatments and $5{\times}10{\times}200mm$ for treatments with chemicals. The specimens were green for boiling treatments and dried to 15 percent for steaming treatments. The specimens for treatments with chemicals were soaked in saturated urea solution, 35 percent formaldehyde solution, 25 percent polyethylene glycol -400 solution, and 25 percent ammonium hydroxide solution for 5 days and immediately followed the bending process, respectively. The results obtained were as follows: 1. The internal temperature of silk worm oak and Korean red pine by boiling and steaming time was raised slowly to $30^{\circ}C$ but rapidly from $30^{\circ}C$ to $80-90^{\circ}C$ and then slowly from $80-90^{\circ}C$ to $100^{\circ}C$. 2. The softening time required to the final temperature was directly proportional to the thickness of specimen. The time required from $25^{\circ}C$ to $100^{\circ}C$ for 15mm-squared specimen was 9.6-11.2 minutes in silk worm oak and 7.6-8.1 minutes in Korean red pine. 3. The moisture content (M.C.) of specimen by steaming time was increased rapidly first 4 minutes in the both species, and moderately from 4 to 20 minutes and then slowly and constantly in silk worm oak, and moderately from 4 to 15 minutes and then slowly and constantly in Korean red pine. The M.C. of 15mm-squared specimen in 50 minutes of steaming was increased to 18.0 percent in the oak and 22.4 percent in the pine from the initial conditioned M.C. of 15 percent The rate of moisture adsorption measured was therefore faster in the pine than in the oak. 4. The mechanical properties of the both species were decreased significantly with the increase of boiling rime. The decrement by the boiling treatment for 60 minutes was measured to 36.6-45.0 percent in compressive strength, 12.5-17.5 percent in tensile strength, 31.6-40.9 percent in modulus of rupture, and 23.3-34.6 percent in modulus of elasticity. 5. The minimum bending radius (M.B.R.) of sapwood and heartwood was 60-80 mm and 90 mm in silk worm oak, and 260 - 300 mm and 280 - 300 mm in Korean red pine, respectively. Therefore, the both species showed better bending processing properties in sapwood than in heartwood. 6. The M.B.R. of edge-grained and flat-grained specimen in suk worm oak was 60-80 mm, but the M.B.R. in Korean red pine was 240-280 mm and 260-360 mm, respectively. Comparing the M.B.R. of edge-grained with flat-grained specimen, in the pine the edge-grained showed better bending processing property than the flat-grained. 7. The bending processing properties of the both species were improved by the rising of softening temperature from $40^{\circ}C$ to $100^{\circ}C$. The minimum softening temperature for bending was $90^{\circ}C$ in silk worm oak and $80^{\circ}C$ in Korean red pine, and the dependency of softening temperature for bending was therefore higher in the oak than in the pine. 8. The bending processing properties of the both species were improved by the increase of softening time as well as temperature, but even after the internal temperature of specimen reaching to the final temperature, somewhat prolonged softening was required to obtain the best plastic conditions. The minimum softening time for bending of 15 mm-squared silk worm oak and Korean red pine specimen was 15 and 10 minutes in the boiling treatment, and 30 and 20 minutes in the steaming treatment, respectively. 9. The optimum M.C. for bending of silk worm oak was 20 percent, and the M.C. above fiber saturation point rather degraded the bending processing property, whereas the optimum M.C. of Korean red pine needed to be above 30 percent. 10. The bending works in the optimum conditions obtained as seen in Table 24 showed that the M.B.R. of silk worm oak and Korean red pine was 80 mm and 240 mm in the boiling treatment, and 50 mm and 280 mm in the steaming treatment, respectively. Therefore, the bending processing property of the oak was better in the steaming than in the boiling treatment, but that of the pine better in the boiling than in the steaming treatment. 11. In the bending without a tension strap, the radio r/t of the minimum bending radius t to the thickness t of silk worm oak and Korean red pine specimen amounted to 16.0 and 21.3 in the boiling treatment, and 17.3 and 24.0 in the steaming treatment, respectively. But in the bending with a tension strap, the r/t of the oak and the pine specimen decreased to 5.3 and 16.0 in t he boiling treatment, and 3.3 and 18.7 in the steaming treatment, respectively. Therefore, the bending processing properties of the both species were significantly improved by the strap. 12. The effect of pin knot on the degradation of bending processing property was very severe in silk worm oak by side, e.g. 90 percent of the oak specimens with pin knot on the concave side were ruptured when bent to a 100 mm radius but only 10 percent of the other specimens with pin knot on the convex side were ruptured. 13. The changing rate in the bending radius of specimen bent to a 300 mm radius after 30 days of exposure to room temperature conditions was measured to 4.0-10.3 percent in the boiling treatment and 13,0-15.0 percent in the steaming treatment. Therefore, the degree of spring back after release was higher in the steaming than in the boiling treatment. And the changing rate of moisture-proofing treated specimen by expoxy resin coating was only -1.0.0 percent. 14. Formaldehyde, 35 percent solution, and 25 percent polyethylene glycol-400 solution found no effect on the plasticization of the both species, but saturated urea solution and 25 percent ammonium hydroxide solution found significant effect in comparison to non-treated specimen. But the effect of the treatment with chemicals alone was inferior to that of the steaming treatment, and the steaming treatment after the treatment with chemicals improved 10-24 percent over the bending processing property of steam-bent specimen. 15. Three plasticity coefficients - load-strain coefficient, strain coefficient, and energy coefficient - were evaluated to be appropriate for the index of bending processing property because the coefficients had highly significant correlation with the bending radius. The fitness of the coefficients as the index was good at load-strain coefficient, energy coefficient, and strain coefficient, in order.

• Korean Journal of Plant Resources
• /
• v.27 no.1
• /
• pp.1-10
• /
• 2014

Essential oils of various plants have been known for potential biological effects such as antibacterial, antifungal, spasmolytic, antiplasmodial activities and insect-repellent property. Recently, the essential oils have attracted considerable interest in oral disease therapy. This essential oil has been known as being effective on easing sick house syndrome, giving forest aroma therapy effect and acting as repellent against pest. The essential oil of Pinus koraiensi, a native plant from Hongcheon-gun, Gangwon-do, was obtained by hydrodistillation. In light of its medicinal importance, in this study its composition, antibacterial activity and the reducing effect of offensive odor have been analyzed. The composition of essential oil was determined by GC and GC-MS. We have identified 14 compounds, of which 1R-${\alpha}$-pinene (19.38 %), 3-carene (10.21 %), camphene (9.82 %), limonene (9.00 %), bicyclo[2,2,1] heptan-2-ol (8.76 %) and ${\beta}$-phellandrene (7.98 %) were the main components. Essential oils from P. koraiensis, Chamaecyparis obtusa, Abies holophylla and Pinus densiflora were compared in terms of alleviating effect of malodors caused from formaldehyde, ammonia, trimethylamine and methylmercaptan. P. koraiensis essential oil was found to decrease the amounts of ammonia and trimethylamine by 75.17 % and 77.36 %, respectively. Antibacterial activity against Streptococcus mutans and Streptococcus sobrinus, which were known as oral cavity inducer, was investigated using the paper disc agar diffusion method. The inhibition zone was observed against S. mutans (5.97 mm) and S. sobrinus (1.40 mm), respectively. P. koraiensis essential oil shown effective deodorization and inhibitory activity against oral cavity in this study might be potential material in oral sanitary industry.