• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2498-2500
• /
• 2003

This paper describes on a teleoperation system with a simulator on operator's computer. When we control robots over the internet, communication propagation delays exist. These delays are potentially destabilizing the entire system, and degrade the operator's intuition and performance, so we designed teleoperation system with simulator. Instead of feedback image data of work space, remote operator can command by seeing simulator in the his computer. Consequently total working time can be decreased. In this paper, we show a propriety of the teleoperation system with a simulator by comparing with one without a simulator.

• 제어로봇시스템학회논문지
• /
• 제11권8호
• /
• pp.709-716
• /
• 2005

As a way to build more efficient and intelligent container cranes for todays hub ports, communication networks are used to interconnect numerous sensors, actuators, controllers, and operator switches and consoles that are spatially distributed over a crane. Various signals such as sensor values and operator's commands are digitized and broadcast on the network instead of using separate wiring cables. This not only makes the design and manufacturing of a crane more efficient, but also easier implementation of intelligent control algorithms. This paper presents the performance evaluation of CAN(Controller Area Network), TTP(Time Triggered Protocol) and Byteflight that can be used for cranes. Through discrete event simulation, several important quantitative performance factors such as the probability of a transmission failure, average system delay (data latency) and maximum system delay have been evaluated.

• Nuclear Engineering and Technology
• /
• 제48권1호
• /
• pp.129-143
• /
• 2016

Sometimes, we need or try to figure out somebody's thoughts from his or her behaviors such as eye movement, facial expression, gestures, and motions. In safety-critical and complex systems such as nuclear power plants, the inference of operators' thoughts (understanding or diagnosis of a current situation) might provide a lot of opportunities for useful applications, such as development of an improved operator training program, a new type of operator support system, and human performance measures for human factor validation. In this experimental study, a novel method for inference of an operator's thoughts from his or her eye movement data is proposed and evaluated with a nuclear power plant simulator. In the experiments, about 80% of operators' thoughts can be inferred correctly using the proposed method.

• 산업경영시스템학회지
• /
• 제14권24호
• /
• pp.199-206
• /
• 1991

As the development of modern technology, human works shift whose roll from physical conditions to the system monitoring tasks. In this paper, safety-presentation configuration is discussed instead of well-known fault-warning configuration. Safety-presentation configuration is verified as superior to the fault-warning configuration in hazard prevention. The estimation of system states involves the decision making environments which lack of required in formations and most of all the informations are not precise too. And the limitation of human information processing show doubtful results. So the estimation of system states is regardes as fuzzy number, and its operation produces the parameter that explain the discriminability(d), decision criterion ($\beta$) of system operator's behaviors. These two values served as performance indices. Especially the $\beta$ is a good milestone of the operator's altitude degree of caution.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.54-56
• /
• 2006

To get the robust and reliable input command, we designed shaping function for target tracking system with commander's handle. Input signals of the commander's handle are generated by human operator. It is response of the human to reduce the error between target and gun. But, tracking error while operator aim a moving target manually gives poor system performance. Input noise, particularly, affects hit accuracy as the system performance. We proposed the design method of input command shaping to reduce the Input noise and to improve the operation ability and convenience. We performed the experiments with combat vehicle, example of Target Tracking System, to show the proposed method is efficient and practical.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 추계 학술대회논문집
• /
• pp.73-77
• /
• 2004

In the present study, an efficient and robust implicit operator for the LU-SGS method is proposed. Numerical experiments for supersonic flow are performed to demonstrate the performance of the proposed method.

• 한국시스템다이내믹스연구
• /
• 제16권1호
• /
• pp.53-74
• /
• 2015

The purpose of this paper is to simulate public trust on nuclear regulation policy. The first of all, public trust variables and the model were developed and analysed by system dynamic method. The model are consisted of the operator safety culture level, regulatory competence levels, the public satisfaction and public trust level. The scenario is made up three type which base scenario, the system operator's safety culture level and accident event level. First. the simulation results of standard scenario shows that rapidly declining public satisfaction and trust level of the national safety after Japan's nuclear accident in November 2011. Second, operator safety culture level and simulated divided into three levels. The results showed that a greater impact on the public satisfaction if bad than good case. Finally, the size of the accident was simulated divided into three levels levels(no accident, medium, serious accidents). the results showed a weak effect against the regulatory capacity and safety performance levels but showed a significant impact on public satisfaction and confidence level.

• Journal of Information Processing Systems
• /
• 제13권5호
• /
• pp.1259-1276
• /
• 2017

As technologies related to sensor network are currently emerging and the use of GeoSensor is increasing along with the development of Internet of Things (IoT) technology, spatial query processing systems to efficiently process spatial sensor data are being actively studied. However, existing spatial query processing systems do not support a spatial-temporal data type and a spatial-temporal operator for processing spatialtemporal sensor data. Therefore, they are inadequate for processing spatial-temporal sensor data like GeoSensor. Accordingly, this paper developed a spatial-temporal query processing system, for efficient spatial-temporal query processing of spatial-temporal sensor data in a sensor network. Lastly, this paper verified the utility of System through a scenario, and proved that this system's performance is better than existing systems through performance assessment of performance time and memory usage.

• 전자공학회논문지SC
• /
• 제44권3호
• /
• pp.51-57
• /
• 2007

표적추적장치의 수동제어기는 인간 운용자의 동특성에 따라 제어명령을 생성하고 원하지 않는 잡음과 외란의 영향으로 시스템의 성능과 안정성을 보장하지 못하게 하는 요인이 되고 있다. 특히, 야지를 기동시 운용자의 운용환경에 따라 운용자 특성이 변동될 경우 시스템의 성능저하와 불안정성은 더욱 증가 된다. 즉, 인간이 제어루프에 포함된 수동제어기는 설계단계에서 시간지연과 같은 운용자의 특성을 고려하여야 하며, 운용자에 의해 생성되는 제어명령이 실제 운용환경에서 외란과 동특성의 변화에 적합하도록 하여야 한다. 본 논문에서는 전시기를 통해 표적을 수동핸들로 추적하는 표적추적장치의 수동제어기를 인간운용자를 포함시켜 구성하고자, 추적명령을 생성하는 운용자 모델링을 수행하였다. 특히, 주행하는 차량에 탑재된 표적추적장치는 외란과 추적위치에 잡음이 많이 존재하기 때문에 운용자 모델링이 쉽지 않은 것으로 알려져 있다. 따라서, 수동표적추적장치의 실제 운용환경에서 수집된 데이터를 이용하여 운용자 및 수동제어기의 모델링을 수행하고, 시뮬레이션을 통하여 적용된 운용자 모델의 타당성과 실효성을 보였다.

• 한국해양공학회지
• /
• 제33권6호
• /
• pp.620-626
• /
• 2019

With the development of robot technology, the expectation of autonomous mission operations has increased, and the research on robot control architectures and mission planners has continued. A scalable and robust control architecture is required for unmanned surface vehicles (USVs) to perform a variety of tasks, such as surveillance, reconnaissance, and search and rescue operations, in unstructured and time-varying maritime environments. In this paper, we propose a robot control architecture along with a new utility function that can be extended to various applications for USVs. Also, an additional structure is proposed to reflect the operator's command and improve the performance of the autonomous mission. The proposed architecture was developed using a robot operating system (ROS), and the performance and feasibility of the architecture were verified through simulations.