• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.525-528
• /
• 1993

KEPCO Research Center is carrying out a simulator(full scope replica type) development project for two nuclear power plants(Kori-2, Younggwang-3,4) and one fossil power plant(Poryong-3,4). In this project, we aim not only the installation of high performance simulators at the power plant sites but also the realization of self reliance of power plant simulation technology in Korea. In the course of preparing procurement specification for the 3 simulators, the present status of power plant simulation technology has been surveyed and is presented in this paper. The fidelity of simulation and the automation of simulation model production has been greatly improved due to the ever increasing computing power of today's workstations. The need and importance of the application of high fidelity simulators to the operator training is refocused since the accident at TMI Nuclear Power Plant, U.S.A.

• Journal of Biosystems Engineering
• /
• 제24권5호
• /
• pp.383-390
• /
• 1999

When a tractor travels slope lands, problems of operator safety and the reduction of job efficiency usually occur. Therefore, maintaining the tractor body being horizontal is critical to improve the security of traveling and the job performance. An experiment was made in a soil bin using the experimental model system built and equipped with a leveling control system. Adaptability of the control system was tested and investigated by analyzing system response in time and frequency domains. Control response time of hydraulic cylinder with 10lpm flow rate on a step input of 10$^{\circ}$slope was about 0.42sec. And it showed a linearly increasing trend without any hunching state. A steady state error of 0.6$^{\circ}$occurred but it was negligible. The hydraulic control system showed a little phase differences within the range of 0.4Hz input frequency. The experimental model showed that implementation of the proposed tractor control system to on slope lands tractor was feasible.

• 동력기계공학회지
• /
• 제12권1호
• /
• pp.72-79
• /
• 2008

This paper designs a looper-tension controller for mass-flow stabilization in hot strip finishing mills. By Newton's 2nd law and Hooke's law, nonlinear dynamic equations on the looper-tension system are firstly derived, and linearized by a linearization algorithm using a Taylor's series expansion. Moreover, a tension calculation model is obtained from the nonlinear dynamic equations which is called as a soft sensor of strip tension between two neighboring stands. Next, a looper-tension servo controller is designed by an ILQ(Inverse Linear Quadratic optimal control) algorithm, and it is combined with a minimal disturbance observer which to attenuate speed disturbances by AGC and operator interventions, etc.. Finally, it is shown from by a computer simulation that the proposed ILQ controller with a disturbance observer is very effective in stabilizing the strip mass-flow under some disturbances, moreover it has a good command following performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.110-112
• /
• 1999

Recently the substation automation is actively researched at each country. Since the substation automation is an integrated system that consist of electrical, electronic and computer technologies, performance evaluation is very important to inspect the developed system's applicable possibility for real power system. Most studies are verified using computer simulation, because it is hard to apply them to real power systems. Therefore development of a substation simulator is necessary for the performance evaluation of many application systems such as operator aid system. This paper introduces a substation simulator. An intelligent fault diagnosis and restorative control expert system is also introduced UDP/IP is applied as a protocol for data transport between expert system and SC(station computer). As to the Graphic User Interface, C++ Language and Visual Basic is used in the Windows NT operating system together with four Pentium II systems.

• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1180-1187
• /
• 2020

A team of operators is required for nuclear power plant operation, and communication between the operators is an important aspect of the team's ability to successfully carry out tasks. It has been difficult to evaluate the quality of this communication though, and as the relationship between communication quality and team performance has yet to be clarified, it has not been applied to most human reliability analysis (HRA) methodologies. This study investigates the relationship between the quality of communication and team performance using data from a full-scope training simulator of a digital main control room (MCR). Two important characteristics of communication were considered to determine quality: each operator's ability to self-confirm the status of a given task in a digital MCR, and the type of communication, as divided into 1-way, 2-way, and 3-way between operators. To measure team performance, the concept of an unsafe act was employed, which is defined as a human error that has the potential to negatively affect plant safety. Analysis results showed that the communication quality and team performance were related to each other. With this more clearly defined relationship, the results of this study can be applied to related performance shaping factors to improve HRA.

• 패션비즈니스
• /
• 제14권3호
• /
• pp.90-96
• /
• 2010

We are stepping into so called "aged society" stage, as the mature people account for 7% of the population by UN's standard yardstick. The goal of this research is to provide the fundamental source in producing ecological lifestyle uniforms of health and substantiality: LOHAS which are relevant to high performance and healthy body and take things like architecture, driving, surroundings, and recycling as main factors. the results of study were as follows: Therefore we can predict, through exerting researches about consumer's usage and preference of uniforms, that the garment business will be upgraded to the medical welfare and urban life style business level. All of the silver town resident we researched wear silver town uniforms, and the uniforms were chosen by the owner and operator. This research was processed through the survey of supervisors who were employed in senior residences. 66% of elderly changed their clothes for laundary every 2 days, The timing of removal of the old uniform was that 17% was less than 1 years, consideration of buying silver-town uniforms were consider materials, design, laundary, convenience of administration, durability, color, cost.

• Journal of Electrical Engineering and Technology
• /
• 제3권1호
• /
• pp.125-129
• /
• 2008

A new genetic algorithm for the solution of a multi-tasking problem is presented in this paper. The approach introduces innovative genetic operation that guides the genetic algorithm more directly towards better quality of the population. A wide variety of standard genetic parameters are explored, and results allow the comparison of performance for cases both with and without the new operator. The proposed algorithm improves the convergence speed by reducing the number of generations required to identify a near-optimal solution, significantly reducing the convergence time in each instance.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1997년도 추계학술대회 학술발표 논문집
• /
• pp.413-416
• /
• 1997

Recently, dynamic recurrent neural networks(DRNN) for identification of nonlinear dynamic systems have been researched extensively. In general, dynamic backpropagation was used to adjust the weights of neural networks. But, this method requires many complex calculations and has the possibility of falling into a local minimum. So, we propose a new approach to identify nonlinear dynamic systems using DRNN. In order to adjust the weights of neurons, we use evolution strategies, which is a method used to solve an optimal problem having many local minimums. DRNN trained by evolution strategies with mutation as the main operator can act as a plant emulator. And the fitness function of evolution strategies is based on the difference of the plant's outputs and DRNN's outputs. Thus, this new approach at identifying nonlinear dynamic system, when applied to the simulation of a two-link robot manipulator, demonstrates the performance and efficiency of this proposed approach.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권1호
• /
• pp.32-37
• /
• 2002

Applications of scaled telemanipulation into micro or nano world that shows many different features from directly human interfaced tools have been increased continuously. Here, we have to consider many aspects of scaling such as force, position, and impedance. For instance, what will be the possible range of force and position scaling with a specific level of performance and stability\ulcorner This knowledge of feasible staling region can be critical to human operator safety. In this paper, we show the upper bound of the product of force and position scaling and simulation results of 1DOF scaled system by using the Llewellyn's unconditional stability in continuous and discrete domain showing the effect of sampling rate.

• International Journal of Ocean System Engineering
• /
• 제3권1호
• /
• pp.10-15
• /
• 2013

A ship cruising in the ocean oscillates continuously due to wave action. In order to reduce the ship's roll, we developed a fin stabilizer as an anti-rolling device for a 500-ton-class high-speed marine vessel. During the development phase, it was necessary to set up control gains for the motion and hydraulic systems and assess the effectiveness of the anti-rolling performance on the ground. For this reason, a Target Simulator, which simulated the ship's motion, was given operator inputs such as the engine telegraph and waterjet deflection angle, and generated roll using a one-degree-of-freedom motion base. Hardware-In-the-Loop Simulation (HILS) was performed using the Target Simulator in order to confirm the various logics of the developed fin stabilizer, select initial control gains, and estimate the anti-rolling performance. In conclusion, it was confirmed that HILS was very helpful to develop the fin stabilizer because it could reduce the number of sea trial tests that were needed and could find many malfunctions in the factory a priori.